Instruction/ maintenance manual of the product 907 ANKO
Go to page of 11
1 MITY FLEX PERISTALTIC PUMPS PERISTALTIC PUMP OWNERS MANUAL 907 & 908 SERIES QUALITY MANAGEMENT SYSTEM REGISTERED TO ISO9001 INTERNATIONAL STANDARDS ANKO PRODUCTS INC.
2 Thank you for purchasing an Anko Mityflex ® Peristaltic pump. We are sure yo u will be completely satisfied with its performance.
3 LIMITED WARRANTY ANKO PRODUCTS, INC., warrants equipment of its manufacture and bearing its identification to be free from defects in workmanship and material.
4 The MITYFLEX ® 907 and 908 models are fixed speed general purpose pumps for dispensing fluid based on products.
5 MODEL 907 FLOW RANG E CHART FLOW RATES (ml/min.) FUSE/ FAN Tubing ID .062 In (1.6 m m) .125 In 93.2 m m) .187 In (4.7 m m) .
6 ROLLER/TUBING SELECTION Use the following color coded rollers with the appropriate tubing I.D. Your unit is assembled with black rollers. Red rollers are included in your tubing kit.
7 TUBING INSTALLATION Inspect all tubing regularly and replace if any sign of deterioration occurs. Always wear safety glasses and protective clothing when working with chemicals.
8 PROCEDURE B Follow steps 1 ‐ 5 in procedure A, then continue with the following. 6. Using extra bracket (figure 1), rotate roller bracket assembly until it is in position as in figure 2.
9 PROCEDURE C Without removing the pump cover, run the entire unit at high RPM.
10 For Roller Replacement (A plastic roller bracket assembly is supplied with units ranging from 2 to 10 8 RPM. No assembly is required for the plastic bracket.
11 1 ‐ Fan 2 ‐ Screw (1) 8 ‐ 32 x 7/8” 3 ‐ Gearmotor 4 ‐ Mounting Bracket (908 only) 5 ‐ Pump Housi.
An important point after buying a device ANKO 907 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ANKO 907 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ANKO 907 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ANKO 907 you will learn all the available features of the product, as well as information on its operation. The information that you get ANKO 907 will certainly help you make a decision on the purchase.
If you already are a holder of ANKO 907, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ANKO 907.
However, one of the most important roles played by the user manual is to help in solving problems with ANKO 907. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ANKO 907 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
