Instruction/ maintenance manual of the product KCA-R70FM Kenwood
Go to page of 27
©PRINTED IN JAPAN B64-2432-00/00 (K)(+) '03/12 11 10 9 8 7 6 5 4 3 2 1 '02/12 11 10 9 8 7 6 FM MODULATOR SYSTEM INSTR UCTION MANU AL SYSTEME A MODULATION DE FM MODE D’EMPLOI SISTEMA DE MODULADOR FM MANU AL DE INSTR UCCIONES KCA-R70FM Take the time to read through this instruction manual.
— 2 — English Contents Before use Safety Precautions ........................................................................3 General features Power ............................................................................................5 Switching Modes .
Reset button — 3 — Ta ke the following precautions to prevent fire and avoid personal injury: • When extending the ignition wire, battery wire, or ground wire, use 0.75mm 2 (A WG18) or larger automotive grade wire to avoid wire deterioration or damage to the covering.
— 4 — English Safety Precautions FCC W ARNING This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.
— 5 — General features SRC Tu rning ON the Power Press the [SRC] button. Tu rning OFF the Power Press the [SRC] button for at least 1 seconds. The FM modulator is turned OFF and the radio can be heard. • Be sure to turn down the volume whenever you listen to the radio or a cassette tape after stopping the disc play .
— 6 — English Sirius satellite radio tuner features d u 4 SRCH ¢ SRC DISP # 1-6 SEEK Band display Channel number Preset station number Press the [SRC] button. Select the "SIRIUS" display . •Y ou need to subscribe to SIRIUS to receive the service by Sirius Satellite Radio.
— 7 — Putting the channel in the memory . 1 Select the preset band Press the [ u ] button. 2 Select the channel to put in the memory Press the [ 4 ] or [ ¢ ] button. 3 Put the channel in the memory Press the [#1] — [#6] button for at least 2 seconds.
— 8 — English — 8 — Y ou can display various kinds of text data transmitted from broadcasting stations by switching as follows. Press the [DISP] button.
— 9 — Disc control features Play: Press the [SRC] button. Select the "CHANGER"/"CHANGER-1"/ "CHANGER-2" display . Stop the play: Press the [SRC] button for at least 1 second. The FM modulator is turned OFF and the radio can be heard.
Disc control features — 10 — English Doing Disc Search by entering the disc number . 1 Enter the disc number Press the number buttons on the remote. 2 Do Disc Search Press the [ + ] or [ – ] button. Canceling Direct Disc Search Press the [ 38 ] button.
Scrolling the displayed CD text, or MD title. Press the [DISP] button for at least 1 second. T ext/T itle Scroll Selecting the folder you want to listen to. 1 Enter Folder Search mode Press the [ 6 ] ( 38 ...Remote ) button. File No. display changes to Folder No.
— 12 — English Menu system The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button for at least 1 second. "MENU" is displayed.
— 13 — Select the frequency . Display V alue "T -FREQ 87.7" 87.7 MHz "T -FREQ 87.9" 87.9 MHz "T -FREQ 88.1" 88.1 MHz "T -FREQ 88.3" 88.3 MHz (Initial setting) "T -FREQ 88.5" 88.5 MHz "T -FREQ 88.
— 14 — English Sirius ID (Electronic Serial Number) is displayed. Sirius ID (ESN) <When the KTC-SR901 is connected> Menu system KCA-R70FM_U.S 02.
— 15 — 1 4 7 2 5 8 0 3 6 9 REMOTE CONTROL UNIT RC-513 SCAN D.REPEAT D.DOWN SEARCH DIRECT CH- T.DOWN D.UP T.UP REP SRC RDM M.RDM Basic Operations of remote [SRC] button Each time the button is pressed the source switches. Basic operations Use two "AAA" batteries.
— 16 — English [T .UP]/ [T .DOWN] buttons Doing track forward and backward. [+]/ [–] buttons Doing disc forward and backward. [ 38 ] button Each time the button is pressed the song pauses and plays. [REP] button Each time the button is pressed T rack Repeat function turns ON or OFF .
1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery . 2. Make the proper input and output wire connections for each unit. 3. Connect the wiring harness wires in the following order: ground, battery , ignition.
English — 18 — Connecting Wires to T erminals To prevent fire when the ignition wire (Red) or battery wire (Y ellow) is short-circuited by coming into contact with the vehicle chassis (ground), only connect the power supply after making the fuse box connections.
SWITCH AUX OFF ON SWITCH PROTOCOL ON IN AUX ] “N” Control output Control input CD/MD auto-changer Changer connection wire FM modulator unit Output Display unit CD/MD auto - changer input • Set the PROTOCOL selection switch to the "N" position.
English — 20 — Installation Installation of Display unit ■ • Installation without using the trim mount plate 3 Attach one strip of V elcro to the slanted-line of the the display units as shown to the left, and attach the other strip of V elcro to the parts where you wish to attach the display units.
— 21 — What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON. 01 ✔ The fuse has blown.
English — 22 — Disc source ? CD/MD play does not start. 52 ✔ CD/MD auto-changer input is not connected to the unit. ☞ Connect the CD/MD auto-changer input to the unit.
— 23 — MP3 source ? Cannot play an MP3. 67 ✔ The disc format is not accepted in the unit connected. ☞ Refer to the instruction manual of the disc changer (slave unit) for creation of compatible formats. ✔ The MP3 has no or invalid track name extension.
English — 24 — T roubleshooting Guide The messages shown below display your systems condition. EJECT : No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. E01 ➪ Load the disc magazine properly . NO DISC: No disc has been loaded in the disc magazine.
— 25 — Specifications Specifications subject to change without notice. Modulating Frequency (200KHz STEP) .......... 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9, 89.1, 89.3, 89.5, 89.7, 89.9 , MHz General Operating V oltage...........................
K CA-R70FM Instruction Manual Addendum: K enwood Music K eg features Playing Songs Select the K enwood Music Keg Press the [ SRC ] button repeat edly until the display reads “CHANGER” Selecting pl.
K CA-R70FM Instruction Manual Addendum: Sirius Satellite Radio tuner features Listening to Radio Stations Select the Sirius mode: Press the [ SRC ] button until the displa y reads “SIRIUS” Selecti.
An important point after buying a device Kenwood KCA-R70FM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KCA-R70FM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KCA-R70FM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KCA-R70FM you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KCA-R70FM will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KCA-R70FM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KCA-R70FM.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KCA-R70FM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KCA-R70FM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
