Instruction/ maintenance manual of the product KAC-816 Kenwood
Go to page of 9
KAC-816 MONO POWER AMPLIFIER INSTRUCTION MANUAL © PRINTED IN MEXICO B64-1170-00 (EM).
2 Safety precautions T ake the following precautions to prevent fire and avoid personal injury : • When extending the battery cable, or ground cable, use 5mm 2 (A WG10) or larger automotive grade cable to avoid cable deterioration or damage to the covering.
3 Installation procedure Installation • Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’ s seat without any hindrances. As generally accepted positions for its installation, places such as inside the trunk, etc.
4 Controls Operations of the following control and switches are required in accordance with the center unit and speakers connected with this unit. POWER IN FUSE(20A) BATT GND FUSE(20A) P.CON(REMOTE) SPEAKER OUTPUT 1 2 3 45 6 MONO POWER AMPLIFIER L 25Hz 15Hz INFRASONIC OFF INPUT SENSITIVITY(V) LPF FREQUENCY(Hz) GND R LINE IN 0.
0 RCA cable ground lead terminal ! LINE IN terminal @ Speaker level input terminals ■ Power indicator: When the power is turned on, the Power indicator lights. If the Power indicator does not light when the power is turned on, the protection function may be activated.
• The genuine-accessory car stereo shall have a maximum power output of no more than 25 W. • Do not connect the speaker output leads from a power amplifier (Optional) to the speaker input terminals of this unit, for this may cause malfunction or damage.
7 POWER IN FUSE(20A) BATT GND FUSE(20A) P.CON(REMOTE) SPEAKER OUTPUT 20 20 SPEAKER OUTPUT SERVO ΙΙ ∑ SERVO ΙΙ ∑ - + ■ Power and Speakers cable connection Power control (REMOTE) lead terminal.
8 Sigma servo feed back The sound reproduced through conventional amplifiers is distorted due to the counterelectromotive force produced in the oscillating system of the speaker . The counterelectromotive force is particularly high with the woofer which requires a large drive mass.
9 Specifications Specifications subject to change without notice. Audio Section Max Power Output (2 Ω ) ................................................................................................400 W × 1 Rated Power Output (4 Ω ) (4 Ω ) .
An important point after buying a device Kenwood KAC-816 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KAC-816 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KAC-816 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KAC-816 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KAC-816 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KAC-816, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KAC-816.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KAC-816. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KAC-816 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
