Instruction/ maintenance manual of the product KAC-6402 Kenwood
Go to page of 14
© B64-3047-00/00 (MV) 4/3/2 CHANNEL PO WER AMPLIFIER KA C-6402 INSTR UCTION MANU AL B64-3047-00_00_M_English.indd 1 B64-3047-00_00_M_English.indd 1 04.
2 English Sa fety precautions 2 W ARNING T o preven t injury or fire, take the f ollowing precautions: • When extending the ignition, battery , or ground wires, make sure to use aut omotive- grade wires or other wires with a 5 mm² (A WG 10) or more to prevent wire det erioration and damage to the wire coating.
English 3 Installation 2 CAUTION • Do not install in the below locations; (Unstable location, In a location that inter feres with driving, In a location that gets wet, In a dusty location, In a place that gets hot, In a place that gets direct sunlight, I n a location that gets hit by hot air) • Do not install the unit under the carpet.
4 English Controls / Indic ator 5 3 2 1 4 (W) 30 40 20 10 5 1 FIL TER switch ( A.ch/B.ch) This switch allows to apply high-pass or low-pass filtering to the speaker outputs. • HPF (High-Pass F ilter) position: The filter outputs the band of higher frequencies than the frequency set with the FIL TER FREQUENCY control.
English 5.
6 English Connection.
English 7 ■ Installation procedure Since there are large variety of settings and connections possible according to applications, read the instruction manual well to select the proper setting and connection. 1. Remov e the ignition key and disconnect the negative - terminal of the battery to prevent short circuits.
.
.
10 English S ystem ex amples L R L R.
English 11 L R L R L C C L R L R.
12 English T roubleshooting Guide What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the follo wing table for possible problems. PROBLEM POSSIBLE CAUSE SOL UTION No sound.
English 13 Specifications Specifications subject to change without notice. Audio Section Max Power Output ............................................................................................................. ...................................
B64-3047-00_00_M_English.indd 14 B64-3047-00_00_M_English.indd 14 04.12.27 2:01:51 PM 04.12.27 2:01:51 PM.
An important point after buying a device Kenwood KAC-6402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood KAC-6402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood KAC-6402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood KAC-6402 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood KAC-6402 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood KAC-6402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood KAC-6402.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood KAC-6402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood KAC-6402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
