Instruction/ maintenance manual of the product Ez700SR Kenwood
Go to page of 23
Ez900HDS Ez700SR CD-RECEIVER INSTR UCTION MANU AL AMPLI-TUNER-LECTEUR DE CD MODE D’EMPLOI REPRODUCT OR DE DISCOS COMP A CTOS RECEPT OR DE FM/AM MANU AL DE INSTR UCCIONES © B64-3019-00/00 (K)(A) T ake the time to read through this instruction manual.
2 | English English | 3 Con tents 2 W arning 2 CAUTION Use of controls or adjustments or performance of procedures other than those specified her ein may result in hazardous radiation exposur e. In compliance with Federal Regulations, f ollowing are repr oductions of labels on, or inside the product relating to laser product saf ety.
4 | English English | 5 Safety precautions About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1999 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
6 | English English | 7 Handling CDs • Don ’t touch the recording surface of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc.
8 | English English | 9 Notes on playing MP3/WMA Ez900HDS/Ez700SR can play MP3 (MPEG1, 2 Audio Layer 3)/WMA. Not e, however , that the MP3/WMA recording media and f ormats acceptable are limited. When wr iting MP3/WMA, pay attention t o the following restrictions.
10 | English English | 11 General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond. V olume Increasing V olume T urn the [ VOL] knob clockwise. Decreasing V olume T urn the [ VOL] knob counterclockwise.
12 | English English | 13 General fea tures Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speaker Setting mode Press the [ AUDIO ] knob.
14 | English English | 15 General fea tures Subw oofer Output T urning the Subwoofer output ON or OFF . Press the [SW] button for at least 1 second. Each time the button is pressed Subwoof er output switches ON or OFF . When it’ s ON, "Sub -W ON" is displayed .
16 | English English | 17 T uner featur es F unction of remote Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] / [AM] button. 2 Enter Direct Acc ess T uning mode Press the [DIRECT ] button on the remote . "– – – –" is displayed.
18 | English English | 19 T uning Selecting the station. 1 Select HD R adio source Press the [SRC] button. Select the "HD Radio" display. 2 Select the band Press the [F M] button. Each time the [FM] button is pr essed, it switches between the HF1, HF2, and HF3 bands.
20 | English English | 21 SIRIUS featur es Channel Preset Memory Putting the channels in the memory. 1 Select the band Press the [F M] button. 2 Select the channel to put in the memor y T urn the [ 4 ] / [ ¢ ] knob. 3 Put the channel in the memory Press the desired [1] — [6] butt on for at least 2 seconds.
22 | English English | 23 CD/MP3/WMA/External disc control f eatures Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
24 | English English | 25 CD/MP3/WMA/External disc control f eatures T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or MP3/WMA folder y ou’ re listening to . Press the [REP] button. Each time the button is pressed the Repeat Pla y switches as shown below .
26 | English English | 27 Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation.
28 | English English | 29 Menu system Con trast Adjustmen t Adjusting the display contrast. Display and Setting "Con trast 0" … "Con trast 7" (Original setting) … "Con trast 10" Dimmer Dimming this unit’ s display automatically when the vehicle light switch is turned ON.
30 | English English | 31 Menu system In HD Radio mode Receiv e mode Setting Sets the receive mode . 1 Select the Receive mode Press the [ AUDIO ] knob. Select the "Receive Mode" display. • This function can be used the [FM] / [AM] button.
32 | English English | 33 In SIRIUS source SIRIUS Lock C ode S etting If you have locked any str eams in the channel lock mode, you will need to ent er 4 digit Lock Code to unlock them. Y ou can change the Lock Code (default is “0000”) as you like.
34 | English English | 35 Basic Operations of r emote In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button is pr essed it switches between the FM1, F M2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations.
36 | English English | 37 Connecting W ires to T erminals MUTE ANT CONT P.CONT FRONT L FRONT R REAR L REAR R – + AUX IN REAR SUB WOOFER FRONT FM/AM antenna input F use (10A) Wiring harness (Accessor.
38 | English English | 39 Screwing the F aceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Ref er to the section <Removing the hard rubber frame> (page 40) and then remove the hard rubber frame.
40 | English English | 41 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. Gener al ? Can't select the source.
42 | English English | 43 The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Inser t the CD.
English | 45 44 | English Specifications Specifications subject to change without notice. Analog FM tuner section Fr equency range (200 kH z space) : 87.9 MHz – 107.9 MH z Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
An important point after buying a device Kenwood Ez700SR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood Ez700SR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood Ez700SR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood Ez700SR you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood Ez700SR will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood Ez700SR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood Ez700SR.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood Ez700SR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood Ez700SR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
