Instruction/ maintenance manual of the product DPX-MP4070 Kenwood
Go to page of 40
DOUBLE DIN SIZED CD/CASSETTE RECEIVER DPX-MP4070 INSTRUCTION MANUAL © B64-2861-00/00 (K) (TKR) 1.DPX-MP4070_K_US.indd 04.3.12, 5:05 PM 1.
2 | English Con tents W arning 3 Safety precautions 4 W ARNING CAUTION NOTE Notes 6 About Cassette tape 6 About CDs 7 Notes on playing MP3/WMA 8 General features 10 Pow er Selecting the Source Volume .
English | 3 2 W arning 2 CAUTION Use of controls or adjustments or per formance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with F ederal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
4 | English Safety precautions 2 CA UTION T o prevent damage to the machine, take the following precautions: • Make sure to ground the unit to a negative 12V DC power supply . • Do not open the top or bottom covers of the unit. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity.
English | 5 About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenwood dealer for connec table models of disc changers/ CD players.
6 | English Cleaning the tape head When there’ s noise or the sound qualit y is bad during tape play the tape head maybe dirt y , clean the tape head. About Cassette tape • If the tape is slack tighten it. • If the cassette tape label is peeling off glue it on again.
English | 7 Handling CDs • Don ’t touch the recording sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD -RW after reading the caution items on the pack age etc. • Don ’t stick tape etc. on the CD.
8 | English Notes on playing MP3/WMA Note, however , that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions. Acc eptable media The MP3/WMA recording media acceptable to this unit are CD-ROM, CD -R, and CD-R W .
English | 9 MP3/WMA playing order When selec ted for play , Folder Search, File Search, or for Folder Selec t, files and folders are accessed in the order in which they were wr itten by the CD writer . Because of this, the order in which they are expected to be played may not match the order in which they are actually played.
10 | English Po wer T urning ON the P ower Press the [SRC ] button. T urning OFF the P ower Press the [SRC ] button for at least 1 second.
English | 11 Subw oofer O utput T urning the Subwoof er output ON or OFF . Press the [AM–] button for at least 1 second. Each time the button is pressed Subwoofer output switches ON or OFF .
12 | English General features Heavy Heavy "Heavy" "Heavy" Soft "Soft" Sharp Sharp "Sharp" "Sharp" Light Light "Light" "Light" Natural "Natural" • "User" display : The values set on the ' Adjustment of Equalizer type at PRO' (page 13).
English | 13 Adjustment of Equalizer type at PRO Adjusting the effect of an Equalizer type selected in 'Equalizer Control' when 'Equalizer mode' is "PRO" . 1 Refer to 'Equalizer C ontrol' (page 12) to select the Equalizer type.
14 | English General features Switching Display Switching the information display ed. Press the [DISP] button. Each time the button is pressed the display switches as shown below .
English | 15 Adjusting Clock 1 Select the clock display Press the [DISP] button. 2 Enter clock adjustment mode Press the [DISP] button for at least 1 second. The ‡ indicator blinks. 3 Adjust the hours Press the [FM+] or [AM–] button. Adjust the minutes Press the [ 4 ] or [ ¢ ] button.
16 | English General features Station/Disc Naming (SNPS/DNPS) Attaching a title to a Station or CD. 1 Receive/pla y the station/disc you want to attach a title to • Refer to the 'Switching Display' (page 14) and selec t either "DNPS" or "SNPS" .
English | 17 T uner f eatures T uning Selecting the station. 1 Select tuner source Press the [SRC ] button. Select the " TUNER" display . 2 Select the band Press the [FM+] or [AM–] button. Each time the [FM+] button is pressed it switches between the FM1, FM2, and FM3 bands.
18 | English Station Preset Memor y Putting the station in the memory. 1 Select the band Press the [FM+] or [AM–] button. 2 Select the frequency to put in the memor y Press the [ 4 ] or [ ¢ ] button. 3 Put the frequenc y in the memory Press the desired [1] — [6] button for at least 2 seconds.
English | 19 Cassette play er fea tures Selec ting the T ape type Press the [MTL] button. Each time the button is pressed the T ape type switches as shown below .
20 | English Cassette play er fea tures DPSS (Direc t Program Search Sy stem) Indicating the songs to skip, and Fast F orwarding or Rewinding. Skipping to a later song Press the [ ¢ ] button. Each time the button is pressed the number of songs sk ipped increases.
English | 21 CD/ MP3/ WMA/ External disc control featur es Playing CD & MP3/WMA When a CD is inser ted Press the [SRC ] button.
22 | English CD/ MP3/ WMA/ External disc control featur es Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 23 In MP3/WMA sourc e Repeat play Repeat play Repeat play Display Display Display File Repeat File Repeat "File REP" Folder Repeat Folder Repeat "Fold.REP" OFF F unction of MP3/WMA Folder Select Quickly selecting the folder you want to listen to.
24 | English F unction Set Function Set Setting during operation beep sound etc. functions. The Function Set basic operation method is explained here. The refer ence for the F unction items and their setting content is after this operation explanation.
English | 25 In Standby mode Opening Demonstr ation Setting the Demonstration when P ower is turned ON. Display Display Display Setting Setting "Open On" Demonstration is carried out when Power is turned ON. "Open Off " Demonstration is not carried out when Power is turned ON.
26 | English F unction Set In Standby mode Security C ode Because authorization by the Security Code is required when it ’ s removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft.
English | 27 In Standby mode CD Read Setting When there is a problem on playing a CD with special format, this setting play the CD by for ce. Display Display Display Setting Setting "CD READ1" Play CD and MP3/WMA. Play CD and MP3/WMA. "CD READ2" Play CD by for ce.
28 | English Basic O pera tions of remote Loading and Replacing the battery Use two " AA "-size batteries. Slide the cover while pressing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case.
English | 29 In T uner source [FM]/ [AM] buttons Select the band. Each time the [FM] button is pressed it switches between the FM1, FM2, and FM3 bands. [ 4 ]/ [ ¢ ] buttons T une up or down band. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations.
30 | English Ac cessories Ac cessories 1 ..........1 2 ..........1 3 (M5×7mm) ..........6 4 (M5×6mm) ..........6 5 ..........1 6 ..........1 7 ..........1 8 ..........1 9 ..........1 0 (M3×6mm) ..........2 ! (M5×10mm) ..........2 @ ..........1 1.DPX-MP4070_K_US.
English | 31 Installation Procedur e Installation Proc edure 1. T o prevent a shor t circuit, remove the key from the ignition and disconnect the - batter y . 2. Make the proper input and output wire connections f or each unit. 3. Connect the speaker wires of the wiring harness.
32 | English Connecting W ires to T erminals AUX IN P.CONT MUTE ANT. CONT ILLUMI EXT.CONT. FRONT L FRONT R REAR L REAR R M 4 � 8 m m MAX FM/AM antenna input Wiring harness (Accessory 1 ) Ign.
English | 33 Installation (For T OY OT A, NISSAN Car etc.) When per forming a check of the CD operation prior to installation, place this unit in a horizontal position and per form a loading/eject of the CD.
34 | English Installation (For HONDA ACURA Car) Installation type 1 1 Use Accessor y 4 to attach the unit which was assembled in Assembly . 2 Install the center panel with the unit in your car • The illustration shows an example of installation using a vehicle bracket.
English | 35 Installation type 2 1 Attach Accessor y 9 which was assembled in Assembly . 2 Remove the factory-installed car stereo and install the unit.
36 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General ? The power does not turn ON.
English | 37 T uner source ? Radio reception is poor . The car antenna is not extended. Pull the antenna out all the way . Pull the antenna out all the way . The antenna control wire is not connected. Connect the wire correctly, referring to the section on 'Connecting Wires to T erminals' .
38 | English T roubleshooting Guide Disc source ? " A UX EXT " is displayed without achieving External disc control mode. Unsupported disc changer is connected. Use the disc changer mentioned in the ' About CD players/disc changers connected to this unit' (page 5) of the sec tion on 'Safety precautions' .
English | 39 The messages shown below display your systems condition. EJEC T: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. Load the disc magazine properly. No CD in the unit. Inser t the CD. No Disc: No disc has been loaded in the disc magazine.
40 | English FM tuner sec tion Fr equency range (200 kHz space) : 87.9 MHz – 107.9 MH z Usable sensitivit y (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivit y (S/N = 50dB) : 15.
An important point after buying a device Kenwood DPX-MP4070 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood DPX-MP4070 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood DPX-MP4070 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood DPX-MP4070 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood DPX-MP4070 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood DPX-MP4070, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood DPX-MP4070.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood DPX-MP4070. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood DPX-MP4070 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
