Instruction/ maintenance manual of the product DP-4090 Kenwood
Go to page of 24
CD PLA YER DP-5090 DP-4090 INSTRUCTION MANUAL KENWOOD CORPORA TION DIGITAL AUDIO COMPACT B60-3043-00 MA ( T, M ) I D 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5 This instruction manual is used for two models. Model availability and features (functions) may differ depending on the country and sales area.
DP-5090/4090 (En) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ................................................................ A C 120 V only Australia .
3 DP-5090/4090 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately .
DP-5090/4090 (En) 4 System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly , reset the microcomputer referring to “In case of difficulty”.
5 DP-5090/4090 (En) Adjusting the output levels of the output jacks and headphone output The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT and PHONES jacks of the unit.
DP-5090/4090 (En) 6 SYSTEM CONTROL OPERA TIONS Remote Control Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver . Automatic Operation (Except [XR] equipment) Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
7 DP-5090/4090 (En) Caution on disc used Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner .
DP-5090/4090 (En) 8 Controls and indicators 1 POWER switch 0 T urns the power ON/OFF . 2 Remote control light sensor 9 3 TEXT DISPLA Y key # Used to select the CD-TEXT information display . 4 PEAK SEARCH key ( 5 Search keys ( 1 , ¡ ) ! Fast forwards or fast reverses the track.
9 DP-5090/4090 (En) Operation of remote control unit 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
DP-5090/4090 (En) 10 Normal play (TRACK mode) 1 2 Load a disc. 3 Start playback. 1 Open the door. Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page.
11 DP-5090/4090 (En) What is the “normal play TRACK mode”? The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off. To set the unit to the TRACK mode: Press the P.MODE key when the ” PGM “ or ” EDIT “ display is lighted.
DP-5090/4090 (En) 12 In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. 1 Preparation : Keys and control used in the operations described on this page.
13 DP-5090/4090 (En) REMOTE CONTROL UNIT RC-P0505 TIME DISPLAY REMOTE CONTROL UNIT RC-P0505 :AC BE D. F. . TEXT DISPLAY T ime display on CD player (TIME DISPLA Y) Each press of the TIME DISPLAY key changes the displayed contents.
DP-5090/4090 (En) 14 Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 32 tracks) ÷ Load a disc in the CD player. Press so that the “PGM” indicator lights. Program desired tracks. 1 2 2 Set the entry .
15 DP-5090/4090 (En) ÷ When a track No. is selected, the track will be added to the end of the existing program. Press to clear tracks from the end. To clear all track. T o check or change the programmed tracks T o add a track to the program T o clear tracks from the program 1 Press the CHECK key .
DP-5090/4090 (En) 16 T o repeat the entire disc 1 Program desired tracks. Repeated playback ÷ All of the programmed tracks will be repeated. ÷ In case only one track is programmed, only that track will be repeated. ÷ Up to 32 tracks can be programmed.
17 DP-5090/4090 (En) Playback in a random order (Random playback) ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player. Preparation 1 : Keys and control used in the operations described on this page.
DP-5090/4090 (En) 18 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 00006 ÷ Recording within 99 minutes can be specified in minutes (2 digits).
19 DP-5090/4090 (En) Press any one of these keys. ÷ The edited data is cleared entirely. T o clear the edited contents T o check the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B.
DP-5090/4090 (En) 20 T imer operations T imer playback of CD can be started at any time using an audio timer which is available in audio stores. 1 Turn the powers of the associated components ON. 2 Preparation Load a disc in the CD player. 0 Set the amplifier volume.
21 DP-5090/4090 (En) ÷ Insert the power plug firmly to the AC outlet. ÷ Turn the amplifier’s power ON. ÷ Load the disc again with its label side up. ÷ Insert the disc properly . ÷ Wipe off the dust on the surface of the disc referring to ”Disc handling precautions“.
DP-5090/4090 (En) 22.
23 DP-5090/4090 (En) Specifications DP-5090 [ Format ] System ............................ Compact disc digital audio system Laser ........................................................ Semiconductor laser [ D/A Convertors ] D/A Conversion .........
For your records Record the serial number , found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below . Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
An important point after buying a device Kenwood DP-4090 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood DP-4090 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood DP-4090 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood DP-4090 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood DP-4090 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood DP-4090, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood DP-4090.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood DP-4090. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood DP-4090 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
