Instruction/ maintenance manual of the product DNX7320 Kenwood
Go to page of 36
© B54-4655-10/01 (MW) DNX7320 DDX7032 DDX7032M GPS NA VIGA TION SYSTEM MONIT OR WITH D VD RECEIVER INST ALLA TION MANU AL GPS 导航系统 附 DVD 接收机显示器 安装 说明书 GPS 내비게이션 시스템 DVD 수신기장착 모니터 설치 설명서 B54-4655-10_01_M_En.
2 | DNX7320/DDX7032/DD X7032M 1 ..........1 2 ..........1 3 ..........1 4 ..........1 5 DNX7320 only ..........1 6 ..........2 7 ..........1 8 ..........1 9 ..........6 0 ..........6 ! ..........1 @ DNX7320 only ..........1 # DNX7320 only ..........1 Ac cessories B54-4655-10_01_M_En.
English | 3 Installation Pr ocedure 1. T o prevent a shor t circuit, remove the key from the ignition and disconnect the - battery. 2. Make the proper input and output wire connections for each unit. 3. Connect the speaker wires of the wiring harness.
4 | DNX7320/DDX7032/DD X7032M Connection B C PRK SW B C A A If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (g round), you may cause a short circuit, that in turn may star t a fire. Always connect those wires to the power source running through the fuse box.
English | 5 ANT. CONT P CONT EXT.CONT REVERSE MUTE REMO.CONT + + + + ILLUMI Accessory @ (GPS Antenna ) (DNX7320 only) (see page 8) T o front left speaker T o front right speaker T o rear left speaker .
6 | DNX7320/DDX7032/DD X7032M Sy stem Connection CAMERA REAR VIEW A V IN1 FRONT REAR WOOFER SUB RELA Y 2 RELA Y 1 A V OUT ■ Front Preout • Audio left output ( White) • Audio right output (Red) .
English | 7 Optional Ac cessory Connection T o KCA-B T200 (Optional Acc essor y) KCA-iP300V (Optional Ac cessory) iPod (commercially av ailable) T V T uner (Optional Ac cessory) Connection cable (Incl.
8 | DNX7320/DDX7032/DD X7032M Installing the Escutcheon For Gener al Motors 1. Cut out accessor y 7 to meet the shape of the opening of the center console. 2. Attach accessor y 7 to the unit. For V olkswagen 1. Attach accessor y ! to the unit. Accessory 7 Cut out to meet the shape of the opening in the vehicle.
English | 9 For T oy ota/Scion 1. Cut out accessor y 7 as illustrated. 2. Fold double-sided adhesive (accessory 8 ) along the slit and attach it to accessory 7 cut-out against the center rib as illustrated. Use 2 pieces of accessory 8 for 1 accessor y 7 cut- out.
10 | DNX7320/DDX7032/DD X7032M Installation for Monitor/Pla yer Unit Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
English | 11 Removing the Hard Rubber F rame (escutcheon) 1. Engage the catch pins on the removal tool 6 and remove the two locks on the lower level . Lower the frame and pull it f or ward as shown in the figure. Accessory 6 Lock Catch ⁄ • The frame can be removed from the t op side in the same manner .
12 | DNX7320/DDX7032/DD X7032M Install the Map data card (DNX7320 only) 1 Press [SRC] to turn the power on 2 Press [ 0 ] to close the panel 3 Press [ 0 ] for at least 1 second to fully open the panel 4 Insert the Map data card Accessory 5 5 Press [ 0 ] to close the panel B54-4655-10_01_M_En.
English | 13 DNX_DDX7_insta_M_En_r1.indd 13 DNX_DDX7_insta_M_En_r1.indd 13 08.1.31 1:35:54 PM 08.1.31 1:35:54 PM.
14 | DNX7320/DDX7032/DD X7032M 1 ..........1 2 ..........1 3 ..........1 4 ..........1 5 仅限DNX7320 ..........1 6 ..........2 7 ..........1 8 ..........1 9 ..........6 0 ..........6 ! ..........1 @ 仅限DNX7320 ..........1 # 仅限DNX7320 ........
中文 | 15 安装过程 1 . 为了防止短路，请从点火开关上拔下钥匙，并断 开 - 电池。 2. 正确连接各设备的输入和输出电线。 3. 连接线束的扬声器电线。 4 . 按照以下顺序连接线束∶接地线，电池线，点火 线。 5.
16 | DNX7320/DDX7032/DD X7032M 连接 B C PRK SW B C A A 如果将点火线(红色)和电池线(黄色)连接到轿车底盘 (地线)，可能会导致短路并起火。请始终将这些电 线连接.
中文 | 17 ANT. CONT P CONT EXT.CONT REVERSE MUTE REMO.CONT + + + + ILLUMI 附件 @ (GPS天线) (仅限DNX7320)(参照第20页) 至前置左扬声器 至前置右扬声器 至后置左扬声器 至.
18 | DNX7320/DDX7032/DD X7032M 系统连接 CAMERA REAR VIEW A V IN1 FRONT REAR WOOFER SUB RELA Y 2 RELA Y 1 A V OUT ■ 前侧预输出 ・音频左声道输出(白色) ・音频右声道输出(红.
中文 | 19 可选附件连接 至KCA-BT200(可选附件) KCA-iP300V (可选附件) iPod (市售) TV调谐器 (可选附件) 连接电缆 (包含在TV调谐器中) 音频输出(黑色) 视频输入 .
20 | DNX7320/DDX7032/DD X7032M 安装孔罩 对于常规汽车 1. 裁剪附件 7 以适应中央控制台开口的形状。 2. 将附件 7 安装到设备上。 对于Volkswagen 1.
中文 | 21 对于 Toyota/Scion 1. 如图所示裁剪附件 7 。 2 . 如图所示，将双面胶带(附件 8 )沿切 口折叠，将附件 7 的切下部分粘贴在 外框中心。对于一个附件 7 的切下部 分使用两片附件 8 。 3. 将附件 7 座孔粘合到设备上。 剪切线 附件 7 附件 8 DNX_DDX7_insta_M.
22 | DNX7320/DDX7032/DD X7032M 安装监视器/播放器设备 使用螺丝起子或类似器具弯曲安 装套管的舌片，并将其固定到位。 金属安装带 (市售) 自攻螺丝 (市售) .
中文 | 23 拆卸硬橡皮圈(孔罩) 1 . 将搭钩销勾在拆卸工具 6 上，拆除底侧的两个锁 扣。 降低框架，并按图示向前拉。 附件 6 锁扣 搭钩 ⁄ ・ 可用相同方法拆除顶部框架。 2. 当完成底侧拆卸后，拆下顶部两个位置。 拆卸设备 1 .
24 | DNX7320/DDX7032/DD X7032M 安装地图数据卡(仅限DNX7320) 1 按下 [SRC] 接通电源 2 按下 [ 0 ] 关闭面板 3 按下 [ 0 ] 一秒钟以上，全部打开面板 4 插入地图数据卡 附件 5 5 按下 [ 0 ] 关闭面板 DNX_DDX7_insta_M_CHS.
中文 | 25 DNX_DDX7_insta_M.indb 25 DNX_DDX7_insta_M.indb 25 08.1.30 2:55:01 PM 08.1.30 2:55:01 PM.
26 | DNX7320/DDX7032/DD X7032M 1 ..........1 2 ..........1 3 ..........1 4 ..........1 5 DNX7320 만 ..........1 6 ..........2 7 ..........1 8 ..........1 9 ..........6 0 ..........6 ! ..........1 @ DNX7320 만 ..........1 # DNX7320 만 ..........1 액세서리 DNX_DDX7_insta_M_KOR.
한글 | 27 설치 절차 1. 누전을 방지하기 위해 시동 장치에서 키를 빼고 - 배터리를 분리하십시오. 2. 각 기기의 입력 및 출력 선을 올바르게 연결하십 시오. 3. 배선 하네스의 스피커 선을 연결하십시오.
28 | DNX7320/DDX7032/DD X7032M 연결 B C PRK SW B C A A 점화 선(빨강)과 배터리 선(노랑색)을 자동차 섀시(접 지)에 연결하면 누전을 일으켜 화재가 발생할 수 있습 니다. 이 선을 항상 휴즈 단자를 통해 공급되는 전원 에 연결하십시오.
한글 | 29 ANT. CONT P CONT EXT.CONT REVERSE MUTE REMO.CONT + + + + ILLUMI 액세서리 @ (GPS 안테나) (DNX7320 만) (페이지 32 참조) 앞 좌측 스피커에 앞 우측 스피커에 뒤 좌.
30 | DNX7320/DDX7032/DD X7032M 시스템 연결 CAMERA REAR VIEW A V IN1 FRONT REAR WOOFER SUB RELA Y 2 RELA Y 1 A V OUT ■ 앞 프리아웃 ㆍ오디오 왼쪽 출력(흰색) ㆍ오디오 오른쪽 .
한글 | 31 옵션 액세서리 연결 KCA-BT200(옵션 액세서리)에 KCA-iP300V (옵션 액세서리) iPod (시중에서 구입 가능) TV 튜너 (옵션 액세서리) 연결 케이블 (TV 튜너.
32 | DNX7320/DDX7032/DD X7032M 보호판 설치 일반 모터용 1. 콘솔 가운데의 구멍의 형태에 맞춰 액세서리 7 를 잘라내십시오. 2. 액세서리 7 를 기기에 부착하십시오. Volkswagen용 1. 액세서리 ! 를 기기에 부착하십시오.
한글 | 33 Toyota/Scion용 1. 액세서리 7 를 그림대로 잘라내십시 오. 2. 그림처럼 틈새를 따라 양면 접착물(액 세서리 8 )을 접어서, 중앙 리브에 대 고 액세서리 7 컷 아웃에 부착하십시 오. 액세서리 7 를 컷아웃을 위한 2개 의 액세서리 8 를 사용하십시오.
34 | DNX7320/DDX7032/DD X7032M 모니터/플레이어 기기 설치 장착 슬리브의 탭을 나사드라이 버로 또는 유사한 기구로 구부려 제 위치에 부착하십시오.
한글 | 35 단단한 고무 프레임 제거 (보호판) 1. 제거 도구 6 에 캐치 핀을 확대하여 낮은 쪽의 두 개의 락을 제거하십시오.
36 | DNX7320/DDX7032/DD X7032M 맵 데이터 카드 설치(DNX7320 만) 1 [SRC]를 눌러 전원을 켜십시오 2 [ 0 ]을 눌러 패널을 닫으십시오 3 [ 0 ]을 최소한 1초 동안 눌러 패널을 완전히 여십시오 4 맵 데이터 카드 삽입 액세서리 5 5 [ 0 ]을 눌러 패널을 닫으십시오 DNX_DDX7_insta_M_KOR.
An important point after buying a device Kenwood DNX7320 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood DNX7320 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood DNX7320 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood DNX7320 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood DNX7320 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood DNX7320, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood DNX7320.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood DNX7320. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood DNX7320 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
