Instruction/ maintenance manual of the product D-R350 Kenwood
Go to page of 28
CD PLA YER DIGITAL AUDIO COMPACT B60-3276-00 MA ( K, P, T, M, I, X, Y ) I D 98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 D-R350 INSTRUCTION MANUAL KENWOOD CORPORA TION This instruction manual for this model also covers the systems in the KENWOOD System “SERIES 21” lineup.
D-R350 (En) 2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ................................................................ A C 120 V only Australia .
3 D-R350 (En) Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately .
D-R350 (En) 4 System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections have been made properly , reset the microcomputer referring to “In case of difficulty”.
5 D-R350 (En) Connection to a general-use amplifier Use the provided audio cords to connect the OUTPUT jacks of this unit to the CD input jacks (or AUX jacks) of the amplifier . Connection to digital amplifier or MD Connect the DIGIT AL OUTPUT (OPTICAL or COAXIAL) jack to the digital input jack of the amplifier , DA T recorder , MD recorder , etc.
D-R350 (En) 6 • • • • • • • • • • • • • • • Controls and indicators Play indicator Pause indicator Text information display (The displays given in this manual are approximations only.
7 D-R350 (En) Operation of remote control unit The keys with the same name as those on the main unit oper - ate the same way as the main unit. The keys marked * are provided only on the remote control unit. Remote Control Unit (RC) A remote control unit is not included with this unit.
D-R350 (En) 8 1 Segment screen This screen is used for selecting the icons for the main equipment. 2 Menu screen This screen is used for selecting the icons for the operating modes. 3 Icons Icons for the equipment used and operating mode are displayed.
9 D-R350 (En) 1 Confirm Set Up Retern Input Source Main Menu TapeA TapeB Tape1 LD Tuner CD VCR2 VCR1 TV Sat. Cable Model T yp e Setu p Model 6 Model 5 Model 3 Model 2 Model 1 Confirm Set Up Retern Input Source Main Menu TapeA TapeB Tape1 LD Tuner CD VCR2 VCR1 TV Sat.
D-R350 (En) 10 Graphical Remote Control Unit (GRC) This instruction manual for this model also covers the systems in the KENWOOD System “SERIES 21” lineup. Since the features vary depending on the combined systems, the remote control operation illustrations (icons) are shown for two types of remote control units.
11 D-R350 (En) 1 Preparing to Play T racks Load/unload a disc. 1 Open the tray. Label side Disc tray 2 Place/remove a disc. 3 When loading or unloading other discs Preparation Loading/unloading discs Close the tray.
D-R350 (En) 12 Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page. ÷ Each press pauses and plays the CD alternately. Playing tracks in order from track No.
13 D-R350 (En) Playback from desired track Remote control unit only Normal play (TRACK mode) What is the “normal play TRACK mode”? The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off.
D-R350 (En) 14 In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. 1 Preparation Searching for tracks by title (TITLE SEARCH) Press the TITLE SEARCH key. ÷ When no CD-TEXT discs are loaded, the ” NO CD TEXT “ display will appear for approx.
15 D-R350 (En) T ime display on CD player (TIME DISPLA Y) Each press of the TIME key changes the displayed contents. Displays Remote control unit only Each item is displayed in turn each time the key is pressed. When the key is repeatedly pressed while an item is being displayed, the display is forcibly moved to the next item.
D-R350 (En) 16 Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (Up to 32 tracks) ÷ Load a disc in the CD player. ÷ Set the INPUT SELECTOR to ”CD“ on the connected device such as AV CONTROL CENTER or receiver.
17 D-R350 (En) T o check or change the programmed tracks ÷ Press it while the “PGM 01” indicator blinks. ÷ The track being played cannot be changed. ÷ Perform only step 1 to simply check the program. ÷ In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
D-R350 (En) 18 Repeated playback T o repeat only the programmed tracks Preparation ÷ Load a disc in the CD player. ÷ Set the INPUT SELECTOR to ”CD“ on the connected device such as AV CONTROL CENTER or receiver. Repeat Return ENTER ENTER T o cancel repeated playback Press the REPEA T key twice.
19 D-R350 (En) T o repeat the entire disc Repeated playback Repeat Return ENTER ENTER T o cancel repeated playback Press the REPEA T key twice. (REPEA T ON → OFF) GRC operation This allows repeated playback of all the tracks on the disc loaded in the disc tray.
D-R350 (En) 20 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing 1 Light the “EDIT” indicator. Preparation ÷ Load a disc in the CD player.
21 D-R350 (En) The CD contents are edited as follows. (1) The tape recording time input is divided by two, and tracks that can be accommodated in file A (which refers to tracks on tape side A ) are selected in order of their track Nos.
D-R350 (En) 22 Playback in a random order (Random playback) ÷ Pressing the 4 key once returns to the beginning of the track being played. ÷ Press the RANDOM key to start normal playback. ™ As tracks are selected at random, you can enjoy listening to for a long time.
23 D-R350 (En).
D-R350 (En) 24 Caution on disc used Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner . Storage When a disc is not to be played for a long period of time, remove it from the CD player and store it in its case.
25 D-R350 (En) ÷ Power plug is loosely connected. ÷ With the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off. ÷ Disc is loaded upside down. ÷ Disc is loose. ÷ Disc is dirty . ÷ Disc is cracked.
D-R350 (En) 26 For the U.S.A. CAUTION: Use of controls or adjustment or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.
27 D-R350 (En) Specifications [ Format ] System ......................................................................... Compact disc digital audio system Laser .........................................................................................
For your records Record the serial number , found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below . Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
An important point after buying a device Kenwood D-R350 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kenwood D-R350 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kenwood D-R350 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kenwood D-R350 you will learn all the available features of the product, as well as information on its operation. The information that you get Kenwood D-R350 will certainly help you make a decision on the purchase.
If you already are a holder of Kenwood D-R350, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kenwood D-R350.
However, one of the most important roles played by the user manual is to help in solving problems with Kenwood D-R350. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kenwood D-R350 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
