Instruction/ maintenance manual of the product Men's Shaver Andis
Go to page of 2
connector fork “seats” itself on the inside “point” on the nylon bracket. Push upper blade slightly to opposite side of bracket on the connector fork. Place lower blade on top of the upper blade and align the screw holes of blade to blade pad (see Diagram H) and replace screws.
IMPORT ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the Andis Clipper/T rimmer . DANGER: T o reduce the risk of electric shock: 1. Do not reach for an appliance that has fallen into water .
An important point after buying a device Andis Men's Shaver (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Andis Men's Shaver yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Andis Men's Shaver - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Andis Men's Shaver you will learn all the available features of the product, as well as information on its operation. The information that you get Andis Men's Shaver will certainly help you make a decision on the purchase.
If you already are a holder of Andis Men's Shaver, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Andis Men's Shaver.
However, one of the most important roles played by the user manual is to help in solving problems with Andis Men's Shaver. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Andis Men's Shaver along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
