Instruction/ maintenance manual of the product DataSmart 486 Kentrox
Go to page of 4
DataSMART ® 486 and 488 E1/FE1 Frame Monitoring DSU/CSUs E1/FE1 Frame Monitoring DSU/CSU s Provide end-to-end circuit monitoring for Frame Relay networks n Identify when bandwidth adjustments are needed n Isolate the source of slow network performance: the LAN, local loop, or WAN n G.
DataSMART E1/FE1 Frame Monitoring DSU/CSUs Pag e 2 The DataSMART 486 and 488 support FrameVision Reporter software to deliver key performance measurements on individual customer circuits. Verify Frame Relay performance DataSMART Frame Monitoring DSU/CSUs help you isolate circuit availability problems and measure round-trip delay from DSU to DSU.
Pag e 3 E1/FE1 Frame Monitoring DSU/CSUs NETWORK INTER FACE Line Rate E1 (2048 Kbps) + 50 ppm Framing G.704 Line Code HDB3 Protocol Clear Channel Frame Relay Line Impedance 120 Ω + 10 Ω at 1024 KH.
DataSMART E1/FE1 Frame Monitoring DSU/CSUs Worldwide Sales Offices Corporate Headquarters +1-503-643-1681 Australia +61-2-9975-1499 Belgium +32-2-712-6555 Canada +1-905-629-3104 China +86-10-65007001 .
An important point after buying a device Kentrox DataSmart 486 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kentrox DataSmart 486 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kentrox DataSmart 486 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kentrox DataSmart 486 you will learn all the available features of the product, as well as information on its operation. The information that you get Kentrox DataSmart 486 will certainly help you make a decision on the purchase.
If you already are a holder of Kentrox DataSmart 486, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kentrox DataSmart 486.
However, one of the most important roles played by the user manual is to help in solving problems with Kentrox DataSmart 486. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kentrox DataSmart 486 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
