Instruction/ maintenance manual of the product KI240SD Kelvinator
Go to page of 10
Please read this manual carefully before using the refrigerator . R.
1.Name of parts 1.Name of parts P ARTS AND FEA TURES P ARTS AND FEA TURES 1 2 3 4 5 6 7 8 9 Freezer Compartment Door Freezer Compartment Door Ice Cube T ray Ice Cube T ray Freezer Compartment Freezer .
2.Correctly positioning 2.Correctly positioning À À 10% + _ 50Hz N 220-240V~ Well V entilating Power Supply Power Line Cord Protection from Moisture Some people believe that the best way of learning about life is by life is by listening the advise of family and friends.
2.Correctly Positioning 2.Correctly Positioning Protection from Heat Fixing Stable Keep Away from Danger Moving Floor on which refrigerator will be placed must be flat and solid. It should not be laid on any soft material such as foam plastic, etc. If the refrigerator is not on the same level, adjust the screws suitably .
4 W ater contained in food or getting into air inside the refrigerator by opening doors may form a layer of frost inside, It will weaken the refrigerator when the frost is thick, while it is more than 2mm thick, you should defrost. Defrosting in freezer chamber is operated manually .
5 This refrigerator has been built with the door hinges on the right. If you wish to change the opening direction, follow the instructions below: 1 1.Insert the two screws-type leveling leg (3) on the hinge (left side). 1.Remove the two screws (1) that hold the lower hinge (2) (right side) to the frame.
6 4 1 3 2 8 4 1 3 7 8 2 5 6 7 6 5.
7 The refrigerator should be cleaned and maintained once a month. When performing maintenance, make absolutely sure that the power plug is first disconnected from the power outlet. Wipe the inner and outer surface of the refrigerator and its accessories with wet cloth.
8 6. T roubleshooting Check if there is a power failure. Check if the power plug is plugged into the power outlet. Check that the fuse has not blown. 1.
Classification of Climate I (16~32 C)N 9 7.T echnical specifications 7.T echnical specifications Items Protective Classification of Electric Shook Resistance Capacity(L) Rated V oltage (V) Rated Input.
An important point after buying a device Kelvinator KI240SD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kelvinator KI240SD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kelvinator KI240SD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kelvinator KI240SD you will learn all the available features of the product, as well as information on its operation. The information that you get Kelvinator KI240SD will certainly help you make a decision on the purchase.
If you already are a holder of Kelvinator KI240SD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kelvinator KI240SD.
However, one of the most important roles played by the user manual is to help in solving problems with Kelvinator KI240SD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kelvinator KI240SD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center