Instruction/ maintenance manual of the product AGR+ AGRC Andis
Go to page of 26
Congratulations – you just went First Class when you bought this Andis Clipper . Careful workmanship and quality design have been the hallmarks of Andis products since 1922. ¡Felicidades! Al adquirir esta maquinilla Andis para cortar el pelo, usted ha hecho una compra de primera clase.
IMPOR T ANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using the Andis Clipper . DANGER: T o reduce the risk of electric shock: 1. Do not reach for an appliance that has fallen into water .
16. Battery pack removal and preparation for recycling: WARNING: Upon removal, cover the battery pack’ s terminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel-Metal Hydride batteries must be recycled or disposed of properly .
• Models AGRC/AGR+ can be used with either the cord pack or the battery . READ THE FOLLOWING BEFORE CHARGING THIS CLIPPER 1. Remove the charger from the carton and plug into an AC outlet as identified on charger unit and on carton. 2. Place the Andis Model AGR+ Cordless Clipper in the form fitting pocket in the charger base.
SAFETY RULES FOR CHARGER AND BA TTER Y P ACK 1. Clipper motor switch must be in the “OFF” position for the charger to operate properly . Do not return the clipper to the charger base with the motor switch in the “ON” position. If the clipper is accidentally put on the charger base in the “ON” position, remove it promptly .
GUIDELINES FOR BA TTER Y P ACK AND CHARGER USE 1. Y our clipper , battery pack, and charger function as several interacting electrical systems. Good electrical contact must be maintained in order for the motor to deliver full power , the batter y to charge properly , and the Refresh feature to operate.
8. Disconnect the charger from the AC outlet if long periods of non-use are anticipated. 9 . Never store batteries in a discharged condition. Recharge them immediately after they are discharged. 10. Many factors influence the life of the battery pack.
USER MAINTENANCE The internal mechanism of your motor clipper has been permanently lubricated by the factory . Other than the recommended maintenance described in this manual, no other maintenance should be performed, except by Andis Company , or an Andis Authorized Repair Service Station.
CHANGING THE BLADE DRIVE ASSEMBL Y If your clipper blades no longer cut properly (be sure to try more than one blade, since blade currently being used may be dull), it could be that your blade drive assembly needs replacement. T o change the blade drive assembly: 1.
MEDIDAS PREVENTIV AS IMPOR T ANTES Cuando se utiliza un aparato eléctrico, se deben tomar ciertas precauciones básicas entre las que se incluyen: leer todas las instrucciones antes de utilizar la maquinilla Andis para cortar el pelo. PELIGRO: A fin de reducir el riesgo de descarga eléctrica: 1.
cortocircuito. Mantenga lejos del alcance de los niños. Si no se observan estas advertenci as, puede ocasionarse un incendio y/o lesiones graves. GUARDE EST AS INSTRUCCIONES ESTE PRODUCTO HA SIDO DISEÑADO P ARA USO COMERCIAL 1. Los modelos AGRC y AGR+ pueden usarse ya sea con cable o con la batería.
3. Antes de usar la unidad por primera vez cargue el paquete de batería como mínimo durante una hora. 4. La base del cargador tiene dos luces indicadoras.
6. No guarde la batería ni el cargador donde la temperatura sea inferior a 50°F o superior a 104°F , ya que podría dañarlos (Figura F). 7. No exponga la base del cargador ni el paquete de batería a condiciones de humedad excesivas (Figura G). 8.
3. Se obtendrán óptimos resultados de carga si la unidad de carga se opera en un lugar donde la temperatura se mantenga estable. Es posible que el paquete de batería reciba menos de la carga plena cuando se produzcan aumentos repentinos de temperatura.
paquete de batería. Durante este tiempo el cargador debe medir precisamente el voltaje de la batería. Si el cargador no sale del ciclo de renovación o no carga plenamente la batería, siga el paso 2 de la página 12.
Para limpiar las cuchillas sugerimos que sumerja solamente las cuchillas en un recipiente poco profundo de aceite Andis para maquinillas para cortar el pelo, mientras la maquinilla esté funcionando. De esa manera saldrá todo el pelo y suciedad que se hayan acumulado entre las cuchillas.
SERVICIO DE REP ARACIÓN EN FÁBRICA Cuando las cuchillas de su maquinilla Andis para cortar el pelo pierdan el filo después de usarlas durante un periodo prolongado, le aconsejamos que envíe las cuchillas a un centro de reparación autorizado de Andis para volver a afilarlas.
10. Brancher le chargeur directement à la prise - ne pas utiliser de rallonge. 11. Débrancher le chargeur avant de brancher ou de débrancher l'appareil. 12. L'utilisation d'un chargeur autre que celui vendu par Andis peut occasionner des risques d'in cendie, d'électrocution ou de blessures à des tierces personnes.
• Les modèles AGRC et AGR+ peuvent être utilisés soit avec le bloc d'alimentation soit avec la pile. LIRE LES INSTRUCTIONS SUIV ANTES A V ANT DE CHARGER LA TONDEUSE. 1. Déballer le chargeur et le brancher à une prise de courant alternatif indiquée sur le dispositif de charge et sur l'emballage.
RÈGLES DE SÉCURITÉ RELA TIVES AU CHARGEUR ET AU BLOC-PILE 1. L'interrupteur du moteur de la tondeuse doit être à la position « ARRÊT » pour que le chargeur fonctionne correctement. Ne pas remettre la tondeuse sur le socle du chargeur lorsque l'interrupteur du moteur est à la position « MARCHE ».
électriques était desserrée. Solution : Retirer le bloc-pile de la tondeuse. Examiner l'ouverture du bloc-pile dans la tondeuse. T rouver les deux jeux de contacts du moteur .
9. Divers facteurs influent sur la durée de vie des blocs-pile. Un bloc-pile qui a été très utilisé et qui a plus d'un an, peut ne pas fournir le même rendement qu'un bloc-pile neuf.
REMPLACEMENT OU CHANGEMENT DU JEU DE LAMES Pour remplacer ou changer le jeu de lames, faire glisser la tête vers l'articulation de la tondeuse (Figure N) et, après avoir mis la ton- deuse sous tension, appuyer sur la lame jusqu'à ce qu'elle se ver- rouille dans la tondeuse.
REMPLACEMENT DE L'ENTRAÎNEMENT DE LA LAME Si les lames de la tondeuse ne coupent plus suffisamment (veiller à en essayer plusieurs, car le tranchant de celle qui est montée peut être émoussé), il se peut que l'entraînement doive être rem- placé.
LIMITED WARRANTY This Andis product is warranted against defective material or workmanship for one year from the date of pur- chase. All implied warranties arising and by virtue of State law shall also be limited to one year .
Form #63966 Rev . A ©2005 Andis company , USA Printed in USA.
An important point after buying a device Andis Andis AGR+ AGRC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Andis Andis AGR+ AGRC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Andis Andis AGR+ AGRC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Andis Andis AGR+ AGRC you will learn all the available features of the product, as well as information on its operation. The information that you get Andis Andis AGR+ AGRC will certainly help you make a decision on the purchase.
If you already are a holder of Andis Andis AGR+ AGRC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Andis Andis AGR+ AGRC.
However, one of the most important roles played by the user manual is to help in solving problems with Andis Andis AGR+ AGRC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Andis Andis AGR+ AGRC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
