Instruction/ maintenance manual of the product P5066 Kawasaki
Go to page of 24
Owner's Manual with Assembly Instructions For Model P5066 • Please read this manual and sav e it with y our original sales receipt. • T ools needed f or assembl y: two assemb ly wr enches (included) and a Phillips Scre wdr iver (not inc luded).
2 P5066a-0920 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Warnings and Cautions . . . . . . . . . .
3 P5066a-0920 ELECTRICAL HAZARD RIDING HAZARD • Pr ev ent Injuries and Deaths • Direct Adult Super vision Requir ed. • Nev er Ride at Night. • K eep Childr en W ithin Saf e Riding Areas .
4 P5066a-0920 • If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751 , rather than return this product to the store. • Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
5 P5066a-0920 Fasteners Shown Actual Size #8 x 3 / 4 " Screw - 4 #8 x 2" Screw - 2 7 / 16 " Washer - 2 For your convenience, we included extra fasteners! Note: Tighten and loosen all screws with a Phillips screwdriver . Do not over-tighten the screws.
6 P5066a-0920 2 1 Vehicle 2 Handlebar 3 Seat 4 12 Volt Battery 5 Rear Axle 6 Rear Wheel Driver - 2 7 Rear Wheel - 2 8 Wheel Cover - 4 9 7 / 16 " W asher - 2 10 3 / 8 " - 16 Hex Nut - 3 11 Hu.
7 P5066a-0920 ELECTRICAL HAZARD Important Notes • Y our new batter y must be charged for at least 18 hours before you use it in your vehicle for the first time. • We recommend that you start charging your battery before beginning assembly of your new vehicle.
8 P5066a-0920 Children can be harmed by small par ts, shar p edges and shar p points in the vehicle's unassembled st ate , or b y electrical items. C are should be t aken in unpac king and assembl y of the v ehicle. Children should not handle par ts, including the bat t er y , or help in assembl y of the v ehicle.
9 P5066a-0920 2 • Position the vehicle upside down. • Slide the rear axle assembly through the hole in the back end of the vehicle, as shown. Make sure the rear wheel driver fits into the pins in the motor assembly inside the vehicle. 3 Rear Axle Assembly • Slide a rear wheel driver , slotted side out , onto the rear axle.
10 P5066a-0920 Plate • While holding the handlebar in place, carefully turn the vehicle over . • Again, make sure the end of the steering column is through the hole in the steering linkage. • Fit the steering column cap onto the end of the steering column.
11 P5066a-0920 • Fit the front clip onto the front of the vehicle, as shown. Hint: The front clip may be factory assembled. Front Clip FRONT VIEW 13 • “Snap” a hubcap onto the center of each wheel cover .
12 P5066a-0920 Seat Drive Buttons • Fit the tab at the front of the seat into the slot near the drive buttons A . • “Snap” the tab at the back of the seat into the slot near the rear of the vehicle B . A B 14 • Insert two #8 x 2" screws into the upper holes in the brush guard and tighten.
13 P5066a-0920 FRONT VIEW 10 20 23 13 14 15 17 16 18 • Before applying the labels, wipe the sur face of the vehicle with a clean, dry cloth to remove any dust or oils. • Place the labels exactly as shown in the illustrations. For best results, avoid repositioning a label once it has been applied to the vehicle.
14 P5066a-0920 RIGHT SIDE VIEW LEFT SIDE VIEW 12 21 9 19.
15 P5066a-0920 IMPORT ANT! Use only a Power Wheels ® 12 volt lead-acid rechargeable battery . Use of any other battery will damage your vehicle. Make sure that you charge the battery for at least 18 hours using the enclosed Power Wheels ® 12 volt charger before operating your vehicle for the first time.
16 P5066a-0920 • Y our Power Wheels ® battery is a non-spillable, sealed lead-acid battery . It must be recycled or disposed of in an environmentally sound manner . • Do not dispose of a lead-acid batter y in a fire. The battery may explode or leak.
17 P5066a-0920 Low Speed Drive RIDING HAZARD • P re vent Injur ies and Deaths • Direct Adult Super vision Requir ed. • Ne v er Ride at Night. • K eep Children Within Saf e Riding Ar eas.
18 P5066a-0920 As assembled, your vehicle is ready to roll in low speed (2½ mph, maximum). It has been pre-set so it will only operate in low speed. After your child has mastered the basic skills of driving and understands the rules for safe driving, it’ s time to connect the high speed connectors to allow the vehicle to operate in high speed .
19 P5066a-0920 • Check all screws, cap nuts and their protective coverings regularly and tighten as required. Check plastic parts on a regular basis for cracks or broken pieces. • During snowy or rainy weather , the vehicle should be stored inside or under a protective cover .
20 P5066a-0920 IMPORT ANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below . If you still experience a problem, please contact Power Wheels ® Consumer Relations, toll-free at 1-800-348-0751 . Or , contact your local Power Wheels ® authorized service center .
21 P5066a-0920 PROBLEM POSSIBLE CAUSE SOLUTION Shor t run time (Less than 1 - 3 hours per char ge) Underchar ged bat tery Charge the bat t er y . A ne w batt ery should have been char ged for at least 1 8 hours bef ore using the v ehicle for the rst time.
22 P5066a-0920 PROBLEM POSSIBLE CAUSE SOLUTION V ehicle r uns in low speed, but does not run in high speed. Please note: The v ehicle is designed to operat e in low speed only in r ev erse . High speed hook-up not disconnected. The vehicle w as pre-set t o run only in low speed.
23 P5066a-0920 Bumper -to-Bumper* Limited W arranty One year limited warranty from the date of purchase on the Power Wheels ® vehicle. Six month limited warranty on the 12 volt battery .
Or contact your local independently owned and operated Power Wheels ® Authorized Ser vice Center . For the location nearest you, visit us on-line at www .power wheels.com . Kawasaki T rademarks used under license to Fisher-Price, Inc. BARBIE and associated trademarks and trade dress are owned byMattel, Inc.
An important point after buying a device Kawasaki P5066 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kawasaki P5066 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kawasaki P5066 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kawasaki P5066 you will learn all the available features of the product, as well as information on its operation. The information that you get Kawasaki P5066 will certainly help you make a decision on the purchase.
If you already are a holder of Kawasaki P5066, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kawasaki P5066.
However, one of the most important roles played by the user manual is to help in solving problems with Kawasaki P5066. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kawasaki P5066 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
