Instruction/ maintenance manual of the product WM-900 Anchor
Go to page of 10
CONTENTS GETTING STARTED ................................................................................................................................................. 2 WHAT IS ANCHORMAN? ...........................................................
11 2 A MESS AGE FROM THE OWNER Thank you for choosing an Anchor Audio wireless intercom system. Our products incorporate state- of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which you have shown by selecting an Anchor system.
3 10 BEL T PACK OPER A TION The ergonomically designed BP -900 AnchorMAN belt pack features an XLR headset jack, heavy duty antenna, headset volume control, microphone sensitivity control, group selection, PTT (push to talk) and transmission indicator LED .
RECHARGEABLE BA T TERIES AnchorMAN belt packs include 4 “ AA ” NiMH rechargeable batteries and AC Gang Charger . Fully charged NiMH bat- teries yield approximately 7 hours of normal use. Alkaline “ AA” batteries can be used but battery life will decrease by half.
HEADSET OPER ATION AnchorMAN wireless intercom systems use both single and dual-earpiece, noise cancelling headsets featuring 4-pin XLR connectors and dynamic microphones. 1. Put on headset and adjust for a firm, comfortable fit 2. Connect headset cable to belt pack jack using the XLR connector 3.
BASIC SYSTEM OPER ATION 1. Charge batteries for 6 hours or until charger LED turns of NOTE: Belt packs operate about 7 hours per charge. 2. Plug headset cable into belt pack & adjust boom 3. Hold down PWR button to turn belt pack ON 4. Set belt packs to same GROUP 5.
Anchor Audio, Inc. P ortable Sound Systems • T orrance, California 100-0165-000/C - 3/08 OWNER’S MANUAL WINGMAN INTERCOM ADAPTOR WINGMAN TECHNIC AL SPECIFIC ATIONS Range (line of sight) US: 1,500.
7 2 A MESS AGE FROM THE OWNER Thank you for choosing an Anchor Audio intercom system. Our products incorporate state- of-the-art design and the finest quality of materials and workmanship. We’re proud of our products and appreciate the confidence which you have shown by selecting an Anchor system.
3 6 WHA T IS WINGMAN? WingMAN is an interface station that allows full duplex communication between AnchorMAN belt packs and unbal- anced party-line intercom systems. The WingMAN includes a transceiver that operates in a FDMA format which is compatible with AnchorMAN belt packs.
PIN CONFIGUR ATION The WingMAN interface connector uses a 3-pin XLR jack on the back panel. Connect the interface box with the wired intercom system us- ing the 3 pin XLR jack on the rear panel. Pin Configuration Select Wired Channel (A or B) to be used according to the pin de- scription above (also shown on pack panel) .
An important point after buying a device Anchor WM-900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Anchor WM-900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Anchor WM-900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Anchor WM-900 you will learn all the available features of the product, as well as information on its operation. The information that you get Anchor WM-900 will certainly help you make a decision on the purchase.
If you already are a holder of Anchor WM-900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Anchor WM-900.
However, one of the most important roles played by the user manual is to help in solving problems with Anchor WM-900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Anchor WM-900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
