Instruction/ maintenance manual of the product 160E Katadyn
Go to page of 2
KATADYN POWERSURVIVOR 160E* Katadyn’ s top perfor ming desalinator F ACT SHEET PRODUCT CHARACTERISTICS T echnology: Reverse osmosis Salt Rejection: 98.4% on average (96% minimum. The desalination degree depends on different influence factors such as pressure, throughput and the quality of water) Flow: Approx.
KATADYN POWERSURVIVOR 160E* Katadyn’ s top perfor ming desalinator F ACT SHEET REVERSE OSMOSIS T o remove dissolved salts from seawater with reverse osmosis, par t of the salt water is filtered through a semipermeable mem brane. Only 10% of the water passes through the membrane.
An important point after buying a device Katadyn 160E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Katadyn 160E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Katadyn 160E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Katadyn 160E you will learn all the available features of the product, as well as information on its operation. The information that you get Katadyn 160E will certainly help you make a decision on the purchase.
If you already are a holder of Katadyn 160E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Katadyn 160E.
However, one of the most important roles played by the user manual is to help in solving problems with Katadyn 160E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Katadyn 160E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
