Instruction/ maintenance manual of the product WATERCLEAN A 2011201 Karcher
Go to page of 25
BTA 5.960-505 .0 ETL 5.970-054 .0 (LP 400V) 5.970-055.0 (MP 400 V) 5.970-156.0 (LP 230V) 5.970-157.0 (MP 230 V) A 2011201 Betriebsanleitung WATERCLEAN 600 LP / MP.
WTC 600 LP / MP 2 Version 06/05 1 2 3 4 6 7 18 19 8 9 20 10 13 14 17 16 12 11 15 5.
WTC 600 LP / MP 3 Sicherheitshinweise Version 06/05 Inhaltsverzeichnis Anlagenelemente 1 Sandfilt er 2 Aktivkohlefilter 3 Steuerung Akt ivkohlefilter 4 Steuerung Sand filter 5 Manometer Eingan gsdruck.
WTC 600 LP / MP 4 Bedienun g und Pflege Version 06/05 3 Bedienung und Pflege 3.1 Inbetriebnahme Vor der Inbetrieb nahme: • Sicherstellen, dass die Anlag e mit der Roh- wasserquelle b zw. deren Fördereinric htung, z. B. Vordruckei nheit, verbunden i st.
WTC 600 LP / MP 5 Bedienun g und Pflege Version 06/05 3.1.3 Anlage einschalte n • Prüfen, ob die Pumpen de r Dosierstati onen, Sand- und Akti vkohlefilter a n den entspreche n- den Steckdosen (18 / 19) am Schaltkaste n (8) angeschlossen sind. • Prüfen ob der Betriebsarte nschalter (9) in der richtigen Positi on "Automatik" bzw.
WTC 600 LP / MP 6 Bedienun g und Pflege Version 06/05 3.2.2 Sand- und Aktivkohlefilter Die Steuerung von Sand- und Aktivkohlefilter zeigt während dem Betr ieb die aktuell e Uhrzeit an. Zum Wechseln der Anzeige: • Taste (32) ca. 5 s drücken , Display (31) zeig t die Uhrzei t der Re generatio n an.
WTC 600 LP / MP 7 Bedienun g und Pflege Version 06/05 3.2.4 Feinfilter wechseln Druckdifferenz a m Manometer (15) und (16) prü- fen. Bei mehr als 0,8 bar, Filtereinsatz wechse ln: • Anlage am Hauptschalter (20) aussc halten. • Rohwasserzufuhr sperren.
WTC 600 LP / MP 8 Bedienun g und Pflege Version 06/05 (2) Leitfähigkeit des T rink wassers v on _____ auf ____ _ µS/cm gestieg en Am Display de s Bedienfeldes (10) den a ktuellen Leitwert des Trinkwassers ables en und mit dem Wert bei Inbetri ebnahme vergleichen (s iehe Inbe- triebnahmeprotok oll) .
WTC 600 LP / MP 9 Verbrauchsm aterial Version 06/05 (2) Dosierung Die Dosierung wird in Abhängi gkeit des Füllstan- des im Dosierbehälter durchgef ührt. Vollständig en tleerter Dosierbehält er: • 10 l Trinkwasser in den Dosierbehält er füllen.
WTC 600 LP / MP 10 Störungen Versio n 06/05 5 Störungen Störungen an der RO-Anlage werden am Bedienfeld (10) mit LEDs si gnalisiert und am Di splay ange- zeigt. Störungen an der Vordruc keinheit werden mi t der roten LED (26) auf der Steuerei nheit der Vordruck- einheit angezei gt.
WTC 600 LP / MP 11 Technische Daten Version 06/05 6 Technische Daten Parameter WTC 600 LP WTC 600 MP Umgebungstemperat ur +1°C - +50° C Lagerungstemperatu r (Auslieferung ) bis -10°C Luftfeucht e ≤ 100% r.F. Versorgung sspannung 3 Ph 400 V 50 Hz * 1 Ph 230 V 50 Hz * * je nach Ausführung derAnlag e Steuerungen Vorfilter: prim/s ek.
WTC 600 LP / MP 12 EG Konformitätserklärung Version 06/05 7 EG Konformitätserklärung Hiermit erklären wir, dass die nachfolg end bezeichnete Masc hine aufgrund ihrer Konzi pierung und Bau- art so.
BTA 5.960- 505.0 ETL 5.970-054 .0 (LP 400V) 5.970-055.0 (MP 400 V) 5.970-156.0 (LP 230V) 5.970-157.0 (MP 230 V) A 2011201 Operating Instructions WATERCLEAN 600 LP / MP.
WTC 600 LP / MP 2 Version 06/05 1 2 3 4 6 7 18 19 8 9 20 10 13 14 17 16 12 11 15 5.
WTC 600 LP / MP 3 Safety Notes Version 06/05 Contents Equipment Components 1 Sand fil ter 2 Activated ca rbon filter 3 Control, acti vated carbon filter 4 Control, sand fi lter 5 Manometer, sand filt .
WTC 600 LP / MP 4 Maintenance and Care Version 06/05 3 Maintenance and Care 3.1 Starting Operation Before starting operation: • Make sure that the equipment i s connected to the untreate d water source and the respective transporti ng gear, e. g., admissio n-pressure unit.
WTC 600 LP / MP 5 Maintenance and Care Version 06/05 3.1.3 Switching On the Equipmen t • Check if the pumps of the metering stat ion, sand and act ivated carbon fil ter are connected to the respect ive power outlets (18 / 19) at the switch box (8 ).
WTC 600 LP / MP 6 Maintenance and Care Version 06/05 3.2 During Operation 3.2.1 Control and Correct iv e Action Intervals d…daily, w…weekly, m… monthly 3.2.2 Sand and Activat e d Carbon Filte r During operation , the sand and acti vated carbon filter control indicates the actu al time.
WTC 600 LP / MP 7 Maintenance and Care Version 06/05 • After a while the indicati on moves back to the current ti me. 3.2.3 Bleeding th e Meteri ng Pump The met ering pump mus t be bled wh en the pum p has drawn in air (e. g., because the metering con- tainer is co mplete ly e mpty) .
WTC 600 LP / MP 8 Maintenance and Care Version 06/05 • Before screwing on the f ilter bowl, ch eck the sealing ring (39) fo r damage. • Screw on the filter bowl and tight en with the f il- ter wrench. • Open the untreated water supply again and start th e system with the main switch.
WTC 600 LP / MP 9 Maintenance and Care Version 06/05 Notice: The amount of concentrate will in- crease. This is correct. Observe the maximum pressure of 21 bar (MP) or 14 bar (LP) at the manometer (11)! • Repeat the adjustmen t steps, i f required. The original d rinking water a mount may possi bly not quite be reache d.
WTC 600 LP / MP 10 Consumption Materi als Version 06/05 (2) Metered Addition The metered ad dition is carried out depend ent of the level in the met ering container. Comple tely empt ied m etering co ntainer: • Fill 10 l of drinking wat er into the met ering con- tainer.
WTC 600 LP / MP 11 Malfunctions Version 06/05 5 Malfunctions Malfunctions of the RO system are signaled with LEDs at the control panel (10) and indicated at the display. Malfunctions on the admiss ion-pressure unit are indicated wit h the red LED (26) on t he control u nit of the admissio n-pressure unit.
WTC 600 LP / MP 12 Technical Data Version 06/05 6 Technical Data Parameter WTC 600 LP WTC 600 MP Ambient temperat ure +1 °C – +50 °C Storage temperatu re (upon delivery) to –10 °C Humidit y <100 % r.F. Supply volt age 3*400 V 50 Hz * 1*230 V 50 Hz * * depending on supply by the customer Pre-filter contro ls: prim.
WTC 600 LP / MP 13 EU Declaration of Co nformity Version 06/05 7 EU Declaration of Conformity We hereby declare that the equi pment described below conf orms to the relevant fundament al safety and health requiremen ts of the app ropriate EU Direct ive, bot h in its basi c design and const ruction as we ll as in the versi on marketed by us.
An important point after buying a device Karcher WATERCLEAN A 2011201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Karcher WATERCLEAN A 2011201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Karcher WATERCLEAN A 2011201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Karcher WATERCLEAN A 2011201 you will learn all the available features of the product, as well as information on its operation. The information that you get Karcher WATERCLEAN A 2011201 will certainly help you make a decision on the purchase.
If you already are a holder of Karcher WATERCLEAN A 2011201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Karcher WATERCLEAN A 2011201.
However, one of the most important roles played by the user manual is to help in solving problems with Karcher WATERCLEAN A 2011201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Karcher WATERCLEAN A 2011201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
