Instruction/ maintenance manual of the product NO FOUND KMR 1250 BAT Karcher
Go to page of 17
5.956-832 A2008274 (04/04) KMR 1250 BA T 1.091-101 1.091-1 1 1 ! www.kaercher.com.
Polski Suomi Svenska Norsk ÅëëçíéêÜ Dansk Español Nederlands Italiano Français English Lesen Sie vor der Inbetriebnahme diese Betriebsanleitung und beachten Sie besonders die “ Sicherheitshinweise ”. Please read these operating instructions before starting and strictly observe the " Safety Instructions ".
13 English IMPORT ANT INFORMA TION ! For your safety Before using the machine for the first time, read these user instructions and the appended booklet Safety Informa- tion 5.956-250 . Please note carefully all the information contained in them.
14 English General data The sweeper is designed for 24 V direct current. It has been provided with a 24 V trough battery (supplied with the 1.091- 111). In the case of other machines, the battery and its appropriate charger must be obtained separately.
15 English OPERA TING CONTROLS 1 . Ignition lock 2 . Pilot lamp - drive malfunction 3 . Battery charge monitoring indicator 4 . Raise/lower RH side brush 5 . Raise/lower main brush 6 . Raise/lower LH side brush (optional) 7 . Two-handed operation hydraulics 8 .
16 English PRIOR T O INITIAL ST ART -UP Directions for unloading ! Do not use a fork-lift truck for unloading the sweeper as the sweeper can sustain damage in this way. The sweeper has been fastened to a pallet for safe transport. Proceed as follows for unpacking it: 1.
17 English Make sure that the LH side brush (if fitted) is still in the raised position, the RH side brush is still in the raised position, the main brush is still in the raised position. Put the starting key into Position 1. The sweeper is ready to operate.
18 English Note : The hopper can only be emptied when the supporting arms have reached a horizontal position. To avoid the dust billowing up when the hopper is emptied, the waste hopper should be lowered as far as possible into the discharge container.
19 English Battery Safety instructions to be noted when handling batteries are: Note instructions for use and display them where they can be easily seen at the place where the battery is charged. Work with batteries only after having had instruction from skilled personnel.
20 English MAINTENANCE Initial inspection after 8 operating hours ! Caution! For the safe functioning of your sweeper, an initial inspection must be carried out after 8 hours of operation. You should have the inspection done by your Kärcher Customer Ser- vice.
21 English Adjusting the sweeping pattern – Open the unit cover and secure it in place. – The sweeping pattern can be altered by turning the central adjusting knob: To increase size of sweeping pattern: turn adjusting knob counter-clockwise (towards +).
22 English Replacing fuses – Park the sweeper, switch it off and make it secure. – Pull out battery plug connection and open the unit cover. – Replace blown fuses with ones with the same rating. Note : If a fuse blows repeatedly, this indicates a fault somewhere in the electrical system.
23 English T echnical Data Dimensions and weights: Length 1.650 m m Width 1.000 m m Height 1.270 m m Weight unladen (ready to operate) 580 k g Total permissible weight 730 k g Driving and sweeping performance: Sweeping path width without side brush 750 m m Sweeping path width w ith 1 side brush 1.
24 English T roubleshooting Pr obl em Poss i bl e c ause Rem edy Sw eeper does not m o ve Bat ter y is f la t R ech arg e or r epl ace bat ter y W ar n in g l i gh t fl ash es Fol l ow t h e st art u .
1.091-101.0 KMR 1250 BA T 20.03.2000 1.091-1 1 1.0 KMR 1250 BA T Package 6.905-986.0 7.651-002.0 6.651-382.0 5.031-378.0 6.277-428.0 6.277-435.0 6.277-427.0 6.277-427.0 6.414-532.0 6.348-306.0 6.905-982.0 4.038-524.0 7.306-500.0 7.312-260.0 5.190-084.
Einschlägige EG-Richtlinien: EG-Maschinenrichtlinie (98/37/EG) EG-Richtlinie Elektromagnetische Verträglichkeit (89/336/EWG), geändert durch 91/263/EWG, 92/31/EWG, 93/68/EWG EG-Richtlinie über Ger.
5.957-544 (04/03) Produkt: Selvopptagende feiemaskin Type: 1.091-xxx Relevante EU-direktiver: EU-maskindirektiv (98/37/EØF) EU-direktiv om elektromagnetisk kompatibilitet (EMC)(89/336/EØF) som ændr.
An important point after buying a device Karcher NO FOUND KMR 1250 BAT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Karcher NO FOUND KMR 1250 BAT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Karcher NO FOUND KMR 1250 BAT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Karcher NO FOUND KMR 1250 BAT you will learn all the available features of the product, as well as information on its operation. The information that you get Karcher NO FOUND KMR 1250 BAT will certainly help you make a decision on the purchase.
If you already are a holder of Karcher NO FOUND KMR 1250 BAT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Karcher NO FOUND KMR 1250 BAT.
However, one of the most important roles played by the user manual is to help in solving problems with Karcher NO FOUND KMR 1250 BAT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Karcher NO FOUND KMR 1250 BAT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
