Instruction/ maintenance manual of the product K 2.01 Karcher
Go to page of 15
English K 2.01 5.961-519.0 01/05 Please keep the original box, pa ckaging and receipt. Be fore operating this unit, please read this manual thoro ughly and retain it for future re ference.
2 English Overview 3 Important Sa fety Ins tructions 4-5 Assembly Instructions 6 Operating Instructions 7 Using the Accessories 8 Working with Detergents 9 Shut Down 10 Taking a Break 10 Winterizing a.
English 3 Item Description : 1 ON/OFF switch 2 Connector for deter gent suction tube 3 High pressure outlet 4 Water inlet with garden hose conne ctor 5 Detergent suction tube with filter 6 Vario power.
4 English WARNING! When using this produ ct basic precautions should always be followed, including the following: ! Read all the inst ructions before using the product. ! To reduce the r isk of injury, close su- pervision is neccessary when a pro- duct is used near children.
English 5 ! Use only extensio n cords with a suf- ficient gaug e. Up to 25 ft = 12/3 AW G; 25 to 50 ft = 10/3 AWG. ! Use only extension cords tha t are in- tended for outdoor use. Th ese ex- tension cords are identified by the marking “Acceptable for use with outdoor appliance s; store indoors while not in use.
6 English Attach the high pressure hose to the trigger gun: " STEP 1: Pull out the locking slide from the right side of the trigger gun handle. " STEP 2: Insert the small end of the high pressure hose into place " STEP 3: Push the locking slide back into the trigger gun (C) to lock the hose in position.
English 7 " STEP 1: Connect the high pressure hose to the unit’s high pressure out- let. " STEP 2: Insert the spray wand to the trigger gu n. Press in aga inst the spring tension and twist into locked position. " STEP 3: Connect garden hose to unit’s water inlet.
8 English WARNING To avoid serious injury never point spray nozzle at yourself, other per- sons or animals. ! The vario power spray wand allows you to adju st the cleanin g pressure . ! To clean at maximum pressure , the wand must be positioned to the high pressure setting (Max).
English 9 Detergents c an only b e applied at low pressure (Min). " STEP 1: Install the vari o power spray wand. Set the spray wand to the low pressure setting (Min). " STEP 2: Fill a container with Kärcher detergent. Place the filter end of d e- tergent suction tube into the contai- ner.
10 English STEP 1: Turn the switch to 0/OFF posi- tion and unplug cord from outlet. STEP 2: Turn off the water source. STEP 3: Press trigger to release water pressure. STEP 4: Disconnect the garden hose from the water inlet on the unit.. STEP 5: Disconnect the high pressure hose from the high pressure outlet.
English 11 " 1: Disconnect all water connections. " 2: Turn on the machine for a few se- conds, until the water which had remained in the pump exits, turn off immediately. " 3: Do not allow high pressure hose to become kinked. " 4: Store the machine and accesso- ries in a room which does not reac h freezing temperatures.
12 English (with or witho ut detergen t) . Pre-rinse deck and surrounding a rea with fresh water. If using Kärcher Deck W ash, ap- ply to surface at lo w pressure. For best results, limit your wo rk area to smaller sections of approximately 25 square feet.
English 13 from left to right. For best results, wipe surface dr y with a cham ois or soft d ry cloth. CAUTION Do not use rotating jet on ve hicles as it may caus e damage. (with or without detergent ). Pre-rinse cleaning surface with fresh water.
14 English CAUTION Disconnect the machine from the power source before makin g any repair. TROUBLESHOOTING Symptom Cause Solution Motor will not start On/Off switch is in the “OFF” (O) position. Turn switch to the “ON” (I) posi- tion Power cord is not plugged in.
English 15 Call: 1-800-465-4980 for help or visit our website: www.karcher.ca If you encounter any additional difficul- ties not listed, please call for help. No detergent. Detergent suction tube not pr o- perly connected to the machi- ne. Check connection.
An important point after buying a device Karcher K 2.01 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Karcher K 2.01 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Karcher K 2.01 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Karcher K 2.01 you will learn all the available features of the product, as well as information on its operation. The information that you get Karcher K 2.01 will certainly help you make a decision on the purchase.
If you already are a holder of Karcher K 2.01, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Karcher K 2.01.
However, one of the most important roles played by the user manual is to help in solving problems with Karcher K 2.01. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Karcher K 2.01 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
