Instruction/ maintenance manual of the product 840M Kango
Go to page of 10
GB 840M Date Code 001 1L2001 9800 0329 01 a.
Service and Repair Manual Model 840M 2 W ARRANTY AND LIABILITY ST A TEMENT All repairs may be completed with standard workshop tools and equipment. SER VICE T OOLS Use only Authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by W arranty or Product Liability .
3 Service and Repair Manual Model 840M FIG. P ART NO. DESCRIPTION OF P ART NO. REQ. 1 9170 4650 00 Ball Bearing (1) 4 9170 4672 80 V ent Kit (1) 8 9170 3253 10 Pivot Nut (1) 10 9170 3252 90 Pivot Bolt (1) 1 1 9170 4650 90 K50 x 8mm Pan Hd. Plastite Screw (1) 12 9170 4651 00 K35 x 8mm Pan Hd.
Service and Repair Manual Model 840M 4 % SEE P AGE 5 FOR ADDITIONAL LUBRICA TION AND SER VICE NOTES Chamfer for barrel washers (1 19) are to face to the outside, as shown. NOTE: Do not wash clutch gear assembly (57). If needed, wipe off with a dry rag.
5 Service and Repair Manual Model 840M % SEE P AGE 6 FOR ADDITIONAL SER VICE NOTES Press Needle Bearing (7) in Connecting Rod (109) so that the same amount sticks out on both sides of the Rod. Press Needle Bearing (6) into Crankcase (37) fl ush with the top of the crankcase casting, as shown.
Service and Repair Manual Model 840M 6 After the armature assembly (30) is installed into the tool, the bearing cup (86) is to be placed on the rear armature bearing (1), (already pressed onto the armature shaft), prior to assembling the motor cover (47) to the tool.
7 Service and Repair Manual Model 840M T er minals, Connectors and 1 or 2 End Wire Preparation Wire Color Origin or Gauge Wire No . Length WIRING SPECIFICA TIONS TERMINAL DESCRIP- P ar t No. Code Qnty . 1 Black Blade Hsg. ----- Component of blade housing assembly .
Service and Repair Manual Model 840M 8 ELECTRICAL TESTING Electrical test Before assemby all electrical parts MUST be checked for safety , and that they conform to speci fi cation.
9 Service and Repair Manual Model 840M W ARNING LETHAL VOL T AGES PRESENT!! IMPORT ANT On completion of the assembly , the unit must be fl ash tested at 4000 volts.
Sickla Industriväg 1A, S-105 23 Nacka Sweden T elephone: +46 (0) 8 743 9600 Fax: +46 (0) 8 743 9650 9800 0329 01 a 54-24-1025 Drwg. 5 08/06.
An important point after buying a device Kango 840M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kango 840M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kango 840M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kango 840M you will learn all the available features of the product, as well as information on its operation. The information that you get Kango 840M will certainly help you make a decision on the purchase.
If you already are a holder of Kango 840M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kango 840M.
However, one of the most important roles played by the user manual is to help in solving problems with Kango 840M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kango 840M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
