Instruction/ maintenance manual of the product 8900 Series 2nd Ave.
Go to page of 8
OWNER’S MANUAL Model: 8900 Series V ehicle Immobilizer This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) This device must accept any interference received, including inter ference that may cause undesired operation.
Silencer products have been designed to provide the consumer with years of trouble-free operation. This manual will provide reference for the operation and maintenance of your new Silencer vehicle immobilizer system. Please, take a moment to read this manual so you will be familiar with the oper- ation of your new system.
3 Each time the system is disarmed using the transmitter the device will begin a protection mode countdown. This is a timed secondary protection mode. If you do not start your vehicle within 60 seconds, your Silencer system will become rearmed and your engine will become disabled again.
4 The Valet Mode allows you to temporarily turn off the passive arming function, eliminating the need to give your transmitter to a parking attendant or garage mechanic. T o enter the Valet Mode, follow these steps: 1. Press the “Disarm” button on your transmitter to insure the device is disarmed (you will hear 2 beeps).
Emergency Override There may come a time when it will be necessary to manually disarm your Silencer system without using your transmitter . This condition occurs if the your transmitter battery is low, dead or if your transmitter becomes damaged or lost.
6 T o replace or remove the batteries for storage in your transmitter follow these steps: 1. T urn the transmitter over and locate the slot at the edge of the transmitter case. 2. Use a small flathead screwdriver to pry apart the top and bottom case of the transmitter while keeping the button side facing downward.
7 3 Y ear W arranty Y our new Silencer ® Security Systems is warranted to be free of defects for 3 years. Silencer ® or its authorized agents will within 3 years from the date of sale to you, repair.
8900-UM Rev . B 5-11-06 © Copyright 2006 Magnadyne Corporation 8900-UM.qxp 5/11/06 2:32 PM Page 8.
An important point after buying a device 2nd Ave. 8900 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 2nd Ave. 8900 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 2nd Ave. 8900 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 2nd Ave. 8900 Series you will learn all the available features of the product, as well as information on its operation. The information that you get 2nd Ave. 8900 Series will certainly help you make a decision on the purchase.
If you already are a holder of 2nd Ave. 8900 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 2nd Ave. 8900 Series.
However, one of the most important roles played by the user manual is to help in solving problems with 2nd Ave. 8900 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 2nd Ave. 8900 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
