Instruction/ maintenance manual of the product UR 1040-G Kärcher
Go to page of 46
EN UR 1040 Uhrenradio | Bedienungsanleitung Clock Radio | User Manual DE.
.
DE DE - 3 V orwort Vielen Dank, dass Sie sich für dieses Produkt entschieden haben. Bitte lesen Sie diese Bedienungsanleitung sorgfältig, damit Sie in der Lage sind, die maximale Leistungsfähigkeit dessen auszuschöpfen und die Sicherheit bei Installation, V erwendung und Wartung gewährleistet wird.
4 - DE Sicherheitshinweise 1. Bedienungsanleitung lesen – Lesen Sie die Bedienungsanleitung aufmerksam, um sich mit der Bedienung des Gerätes vertraut zu machen. 2. Bedienungsanleitung aufbewahren – Bewahren Sie die Bedienungsanleitung sorg - fältig auf.
DE DE - 5 personal durchgeführt werden. V ersuchen Sie niemals, das Gerät selbst zu reparieren. Öffnen Sie niemals das Gehäuse. 16. Offenes Feuer – Halten Sie das Gerät fern von offenem Feuer . Stellen Sie keine bren - nenden Kerzen oder ähnliches auf das Gerät.
6 - DE Bedienelemente 1. MEM.SET / NAP/M+ / Display On/Off 2. Alarm 1 On/Set 3. Alarm 2 On/Set 4. Snooze / Sleep / Dimmer 5. CLK.ADJ. / TEMP / Radio Freqeuncy 6. ◄ ◄ / T une - / Y -M-D 7. ► ► / T une + / DST / C-F 8. V olume + / Display Auto Change On/Off 9.
DE DE - 7 das gewünschte Stundenformat (24h oder 12h) anhand der T asten ◄ ◄ (6) und ► ► (7). 5. Drücken Sie erneut die T aste CLK.ADJ. (5). Die Stunde blinkt nun. Stellen Sie die aktuel- le Stunde anhand der T asten ◄ ◄ (6) und ► ► (7) ein.
8 - DE Funktionen Wecker aktivieren/deaktivieren • Um einen zuvor eingestellten Wecker zu deaktivieren, halten Sie die entsprechende ALARM-T aste (ALARM 1 oder ALARM 2) während der normalen Uhrzeitanzeige für 2 Se- kunden gedrückt bis die Alarm-Anzeige erlischt.
DE DE - 9 Jahr Monat Ta g Temperaturanzeige • Um die Raumtemperatur anzuzeigen, drücken Sie während der Uhrzeitanzeige oder im Radiomodus die TEMP-T aste (5). Die T emperatur wird im Display angezeigt. • Um zwischen Celsius und Fahrenheit hin- und herzuschalten, drücken Sie während der T emperaturanzeige die C-F-T aste (7).
10 - DE Reset Die Reset-T aste bendet sich an der Geräteunterseite. Zur Betätigung benötigen Sie eine Büroklammer . Drücken Sie die T aste nur , wenn sich das Gerät anderweitig nicht mehr bedienen lässt. Alle Einstellungen gehen verloren und müssen erneut vorgenommen werden.
.
12 - EN Safety Information 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.
EN EN - 13 ensure that the apparatus is working properly and safely . 19. Batteries – Always place batteries in the correct polarization into electrical components. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
14 - EN Functions and Controls 1. MEM.SET / NAP/M+ / Display On/Off 2. Alarm 1 On/Set 3. Alarm 2 On/Set 4. Snooze / Sleep / Dimmer 5. CLK.ADJ. / TEMP / Radio Freqeuncy 6. ◄ ◄ / T une - / Y -M-D 7. ► ► / T une + / DST / C-F 8. V olume + / Display Auto Change On/Off 9.
EN EN - 15 2. Press the CLK.ADJ. button (5) again. The month starts ashing. Select the current month using the buttons ◄ ◄ (6) and ► ► (7). 3. Press the CLK.ADJ. button (5) again. The day starts ashing. Select the current day us - ing the buttons ◄ ◄ (6) and ► ► (7).
16 - EN switch back to the clock display . 9. The ALARM indicator is lit indicating that the alarm is active. Functions Activating/Deactivating an Alarm • T o deactivate a previously set alarm, press and hold the respective ALARM button (1 or 2) during regular clock display for 2 seconds until the alarm indicator disappears.
EN EN - 17 Temperature Display • T o display the room temperature, press the TEMP button (5) once during clock display or in radio mode. The temperature will be shown in the display . • T o switch between Celsius and Fahrenheit, press the C-F button (7) once during tem- perature display .
18 - EN Note: For the best FM reception completely unroll the FM wire antenna. Radio Station Presets 1. Press the On/Off button (9) to switch on the radio. 2. Select a desired radio station using the buttons ◄ ◄ / T une - (6) or ► ► / T une + (7).
.
www.karcher-products.de.
19 3 . Image Optimization Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-suppor ted display capab le of DDC/CI, only the Help and Options tabs are availab le. All other Smar tControl Premium tabs are not availab le.
20 3 . Image Optimization Help>V ersion - Will only be active when selecting V ersion from the drop- down Help menu. On a non-suppor ted display capab le of DDC/CI, only the Help and Options tabs are availab le. Context Sensitive men u The Context Sensitive menu is Enab led by default.
21 3 . Image Optimization T ask T ra y Menu Disabled When the T ask T r ay is disab led in the preference folder , only the EXIT selection is a vailab le . T o completely remo ve Smar tControl Premium from the task tray , disable Run at Star tup in Options>Preferences.
22 3 . Image Optimization Note If the outline of the region is not visible when dragging the window , “Show windows contents while dragging” is disab led. T o enable: 1. In Control Panel, click System. 2. Click Advanced system settings (For Vista & Win7 OS, this is located on the left sidebar) 3.
23 3 . Image Optimization Left Click Menu Left click on the Desktop Par tition icon to quickly send the active windo w to any par tition without having to drag and drop.
24 3 . Image Optimization 6PDUW'HVNWRS3DU WLWLRQ'HÀQLWLRQV Name Description Image Full Desktop Applies all settings to the entire desktop. V er tical Assesses the screen resolution and divides the display into two ev enly sized v er tical regions.
25 3 . Image Optimization Name Description Image Horizontal Split Bottom Assesses the screen resolution and divides the display into two ev enly sized horizontal regions, the bottom region is single , the top region is spilt into two ev enly sized regions For 90 Par tition 1&2 on r ight side V er tical P ar tition 3 on left side V er tical.
26 4. Po werSensor ™ 4. P ow erSensor™ How does it w ork? P ow erSensor works on pr inciple of transmission and reception of har mless “infrared” signals in order to detect userpresence . When the user is in front of the monitor the monitor operates nor mally , at the predetermined settings that the user has set - i.
27 5 . B ui l t-in W e b cam wit h M icrop h one 5. Built-in W ebcam with Micr ophone Note USB connection between the monitor and PC is required for the webcam to operate. The webcam allo ws you to hold interactive video and audio conference calls o ver the internet.
28 7 HFKQLFDO6SHFLÀFDWLRQ V 6. T echnical Specifications Picture/Displa y Monitor Panel T ype PLS LCD Backlight LED Panel Siz e 27" W (68.6 cm) Aspect Ratio 16:9 Pixel Pitch 0.233 x 0.233 mm Brightness 300 cd/m² Smar tContrast 20,000,000:1 Contrast Ratio (typ.
.
30 7 HFKQLFDO6SHFLÀFDWLRQ V 6.1 Resolution & Preset Modes Maximum Resolution 2560 x 1440 @ 60 Hz (digital input) Recommended Resolution 2560 x 1440 @ 60 Hz (digital input) H. freq. (kHz) Resolution V . freq. (Hz) 31.47 720 x 400 70.
.
32 8. Regulatory Infomation 8. Regulator y Information Lead-free Pr oduct Lead free display promotes environmentally sound reco ver y and disposal of waste from electrical and electronic equipment.
33 8. Regulatory Infomation EPEA T (www .epeat.net) The EPEA T (Electronic Product Environmental Assessment T ool) progr am evaluates computer desktops, laptops, and monitor s based on 51 environmental criter ia developed through an extensive stakeholder consensus process suppor ted by US EP A.
34 8. Regulatory Infomation Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device , pur suant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
.
36 8. Regulatory Infomation North Europe (Nordic Countries) Inf ormation Placering/V entilation V ARNING: FÖRSÄKRA DIG OM A TT HUVUDBR YT ARE OCH UTT AG ÄR LÄTÅTK OMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLA TS. Placering/V entilation AD V ARSEL: SØRG VED PLA CERINGEN FOR, A T NETLEDNINGENS STIK OG STIKK ONT AKT ER NEMT TILGÆNGELIGE.
37 8. Regulatory Infomation EU Energy Label The European Energy Label infor ms you on WKHHQHUJHIÀFLHQFFODVVRIWKLVSURGXFW 7KHJUHHQHUWKHHQHUJHIÀFLHQFFODVVRIWKLV product is the low er the ener gy it consumes.
.
39 9. Customer care and war ranty Note A red or blue bright dot must be more than 50 percent brighter than neighbor ing dots while a green bright dot is 30 percent br ighter than neighboring dots. Black Dot Defects Black dot defects appear as pix els or sub pixels that are always dark or 'off'.
.
41 9. Customer care and war ranty Contact Information for CENTRAL AND EASTERN EUR OPE r egion: Countr y Call center CSP Consumer care n umber Belar us N/A IBA +375 17 217 3386 +375 17 217 3389 Bulgaria N/A LAN Ser vice +359 2 960 2360 Croatia N/A MR Ser vice Ltd +385 (01) 640 1111 Czech Rep .
42 9. Customer care and war ranty Contact Information for China: China Consumer care number : 4008 800 008 Contact Information for NOR TH AMERICA : Countr y Call center ASC Consumer care n umber U .
43 9. Customer care and war ranty Vietnam FPT Ser vice Informatic Company Ltd. - Ho Chi Minh City Branch +84 8 38248007 Ho Chi Minh City +84 5113.562666 Danang City +84 5113.562666 Can tho Province Mon.~Fri. 8:00-12:00, 13:30-17:30 Sat. 8:00-12:00 Philippines EA Global Supply Chain Solutions ,Inc.
44 1 0. T r oubleshooting & F A Q s 10. T r oubleshooting & F A Qs 10.1 T roubleshooting This page deals with problems that can be corrected by a user . If the problem still per sists after you ha ve tried these solutions, contact Philips customer ser vice representativ e .
An important point after buying a device Kärcher UR 1040-G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Kärcher UR 1040-G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Kärcher UR 1040-G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Kärcher UR 1040-G you will learn all the available features of the product, as well as information on its operation. The information that you get Kärcher UR 1040-G will certainly help you make a decision on the purchase.
If you already are a holder of Kärcher UR 1040-G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Kärcher UR 1040-G.
However, one of the most important roles played by the user manual is to help in solving problems with Kärcher UR 1040-G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Kärcher UR 1040-G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
