Instruction/ maintenance manual of the product 69-2520 K&N Engineering
Go to page of 2
A B A C E D O M G H I F P J K L INST ALLA TION INSTRUCTIONS 69-2520 TO ST ART : 1. T urn the ignition OFF and disconnect the vehicle's negative battery cable. 2. Remove the air temperature sensor from the stock intake tube as shown 3. Remove the wire loom from retaining clips as shown.
INST ALLA TION INSTRUCTIONS Continued • P .O. BOX 1329, RIVERSIDE, CA., U.S.A. 92502 • TECH SERVICE 800-858-3333 • F AX 951-826-4001 • e-mail: tech@knfilters.com • WWW: http://www .knfilters.com 174047D 32. Reverse the removal process and reinstall the inner fender valance.
An important point after buying a device K&N Engineering 69-2520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought K&N Engineering 69-2520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data K&N Engineering 69-2520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, K&N Engineering 69-2520 you will learn all the available features of the product, as well as information on its operation. The information that you get K&N Engineering 69-2520 will certainly help you make a decision on the purchase.
If you already are a holder of K&N Engineering 69-2520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime K&N Engineering 69-2520.
However, one of the most important roles played by the user manual is to help in solving problems with K&N Engineering 69-2520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device K&N Engineering 69-2520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
