Instruction/ maintenance manual of the product XV-N670B JVC
Go to page of 28
XV -N670B XV -N672S DVD PLA YER INSTRUCTIONS L VT1873-001A [J] For Customer Use : Enter below the Model No. and Serial No. which are located on the rear of cabinet.
2 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the productʼs enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings.
4 Introduction . . . . . . . . . . . . . . . . . . .5-8 About the Symbol Display . . . . . . . . . . . . . .5 Symbol Used in this Manual . . . . . . . . . . . . . . .5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .5 Handling Discs .
Operation Reference Installation and Setup 5 T o ensure proper use of this product, please read this owner ʼs manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location.
6 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Video CD (VCD/SVCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD±R/RW and CD-R/R W , Dual disc that contains audio titles, DivX, MP3, WMA, and/or JPEG files.
Operation Reference Installation and Setup 7 Introduction Front Panel a 1/' ST ANDBY/ON Switches the unit ON and OFF . b Disc T ray Insert a disc here. c Z (OPEN/CLOSE) Opens or closes the disc tray . d Display window Shows the current status of the unit.
8 Remote Control ST ANDBY/ON ( 1/' ) Switches DVD Player ON and OFF . OPEN/CLOSE ( Z ) Opens and closes the disc tray . P AUSE/STEP ( X ) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. SKIP ( . / > ) Go to next chapter or track.
Operation Reference Introduction 9 Installation and Setup Setting up the Player The picture and sound of a nearby TV , VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV , VCR, or radio, or turn off the unit after removing the disc.
10 HDMI connection If you have an HDMI TV or a monitor , you can connect it to this player using an HDMI cable. 1. Set the TVʼ s source to HDMI (refer to TV Owner ʼs manual). 2. Connect the HDMI OUTPUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor (H) .
Operation Reference Introduction 11 Installation and Setup Audio Connection to Optional Equipment Connect the DVD player to your optional equipment for audio output.
12 When you turn on for the first time The menu for a language selection will appear when you turn on the unit for the first time. Y ou must select a language to use the unit. Use b / B / v / V to select a language then press ENTER and the confirm menu will appear .
Operation Reference Introduction 13 Installation and Setup LANGUAGE Menu Language Select a language for the Setup menu and the on-screen display . Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
14 AUDIO Each DVD disc has a variety of audio output options. Set the player ʼs AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG Bitstream – Select “Bitstream” if you connect this unitʼs DIGIT AL AUDIO OUTPUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder .
Operation Reference Introduction 15 Installation and Setup OTHERS PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. B.L.E. (Black Level Expansion) T o select the black level of playback pictures.
16 Operations General Features Buttons Operations OPEN/CLOSE ( Z ) Opens or closes the disc tray . P AUSE/STEP ( X ) During playback, press P AUSE/STEP ( X ) to pause playback. Press P AUSE/STEP ( X ) repeatedly to play Frame-by- Frame. SKIP ( . / > ) During playback, press SKIP ( .
17 Operation Notes on general features: • On a V ideo CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 15). • If you press SKIP ( > ) once during Repeat Chapter (T rack) playback, the repeat playback cancels.
18 Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recorded media or Audio CD, a menu appears on the TV screen. Use v / V to select a track/file and then press PLA Y ( N ) or ENTER and playback starts.
19 Operation Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory . A program can contain 30 tracks. 1. Insert an Audio CD or MP3/WMA files recorded media. AUDIO CD or MUSIC menu appears.
20 Viewing a JPEG file This unit can play JPEG files. 1. Insert a JPEG files recording media. The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLA Y ( N ).
21 Playing a DivX Movie file This unit can play DivX files. 1. Insert a DivX file recording media. The MOVIE menu appears on the TV screen. 2. Press v / V to select a folder , and press ENTER. A list of files in the folder appears. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLA Y ( N ).
22 Playing a DVD VR format Disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. 1. Insert a disc and close the tray . The DVD-VR menu appears on the TV screen 2. Press v / V to select a title then press PLA Y ( N ) or ENTER and playback starts.
23 Remote Control Function Remote Control C1/C2/C3 Code Switching This unit is initially set to C3 code (JVC DVD PLA YER code). Y ou can easily change the Remote Control code to C1 (JVC VCR code), C2 (JVC DVD RECORDER code) or C3 as shown below . • Keep pressing ENTER down during step 1.
24 Language Code Abkhazian 6566 Afar 6565 Afrikaans 6570 Albanian 8381 Ameharic 6577 Arabic 6582 Armenian 7289 Assamese 6583 Aymara 6588 Azerbaijani 6590 Bashkir 6665 Basque 6985 Bengali; Bangla 6678 .
25 Reference Symptom No power . The power is on, but the DVD player does not work. No picture. No sound. The DVD player does not start playback. The remote control does not work properly . Possible Cause • The power cord is disconnected. • No disc is inserted.
26 General Power requirements: AC 120 V , 60 Hz Power consumption: 9 W Dimensions (Approx.): 430 x 39 x 192 mm (17 x 1.5 x 7.6 inches) (W x H x D) without foot Net weight (Approx.): 1.5 kg (3.3 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 5 % to 90 % Outputs VIDEO OUTPUT : 1.
27 Reference W arranty (Only in U.S.A.).
XV -N670B / XV -N672S EN 0208KMMLGEEGL P/N: MFL47214202.
An important point after buying a device JVC XV-N670B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC XV-N670B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC XV-N670B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC XV-N670B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC XV-N670B will certainly help you make a decision on the purchase.
If you already are a holder of JVC XV-N670B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC XV-N670B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC XV-N670B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC XV-N670B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
