Instruction/ maintenance manual of the product VIDEO NAVIGATOR GV-DV1000 JVC
Go to page of 26
ENGLISH FRANÇAIS CASTELLANO ENGLISH Video Navigator DV Capture Board PhotoSuite SE V ideoW orks GV -DV1000 BEFORE OPERA TION A V ANT DE COMMENCER ANTES DE LA OPERACION L YT0272-001A.
2 EN JVC SOFTW ARE LICENSE AGREEMENT TO CUSTOMERS: MAKE SURE TO READ THIS CAREFULL Y BEFORE OPENING THE SEALED SOFTW ARE P ACKETS Thank you f or purchasing our product. In order to star t using the softw are program en- closed, you are required to accept the terms and conditions of the agreement as provided below .
EN 3 5. LIMITED W ARRANTY JVC warrants that an y media in which the Program is embodied (e.g. flopp y discs, CD-R OM, etc.) are free from any def ects in mater ials and workmanship f or a per iod of t.
4 EN CONTENTS JVC SOFTW ARE LICENSE AGREEMENT 2 TECHNICAL SUPPORT FOR REGISTERED USER 5 User Registration Method ......................................................... 5 NOTICE FOR USERS 7 INST ALLING DV CAPTURE BOARD 8 INST ALLING DV CAPTURE DRIVERS 10 For WINDOWS ® 98 .
EN 5 See JVC Software License Agreement . (p. 2) See Adaptec Software License Agreement . (attached sheet) For repair of the board see Repair of Adaptec DV Capture Board in below . See MGI Software Corp, Software License Agreement . (attached sheet) See MGI Software Corp, Software License Agreement .
6 EN TECHNICAL SUPPORT FOR REGISTERED USER (cont.) JVC Support for: Phone: 1-800-252-5722 (only in U.S.A) Adaptec and MGI Support for: North America (Canada) Address: MGI Software Corp. 40 W est W ilmot Street Richmond Hill, Ontario L48 1H8 Canada Phone: 1-905-764-7291 e-mail: support@mgisoft.
EN 7 When contacting the technical support centers (p. 6) about this software, please fill out the following and have the appropriate information ready . Please note that it may take some time to respond to your questions, depending on their subject matter .
8 EN INST ALLING DV CAPTURE BOARD T o install the DV Capture Board (AHA-8920 IEEE Host Adapter) in your computer so you can connect IEEE 1394 devices to your system, follow these steps: 1 Discharge an.
EN 9 5 Remove the DV Capture Board from its antistatic packaging. Always handle the card by its edges. 6 Carefully insert the DV Capture Board into the PCI expansion slot until it is firmly seated, then replace the slot cover screw . 7 Replace your computer cover .
10 EN INST ALLING DV CAPTURE DRIVERS Caution • In case the DV Capture Board has been installed with W indows ® 95, these steps are not required. FOR WINDOWS ® 98 Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already , install the DV Capture Board (see p.
EN 11 4 Make sure only the CD-ROM drive is selected. Then click the Next button. 5 Make sure The updated driver (Recommended) Adaptec AHA- 8920 Host Adapter is selected. Then click the Next button. 6 Click the Next button. 7 Click the Finish button. 8 Restart your computer .
12 EN INST ALLING DV CAPTURE DRIVERS (cont.) Before installing, confirm your W indows ® 95 version. Double-click the system icon in the Control Panel and select General tab. FOR WINDOWS ® 95 VERSION 4.00.950B OR LA TER Before you use the DVC Capture Board, you must install the DV Capture Board drivers.
EN 13 4 The Insert Disk window is displayed. Click the OK button. 5 If you know the drive letter for your CD- ROM drive enter it in the box below Copy files from : and go to step 7. If you do not know the drive letter for your CD-ROM drive continue with the next step.
14 EN FOR WINDOWS ® 95 VERSION 4.00.950 OR 4.00.950A Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you have not done so already , install the DV Capture Board (See p. 8). Follow these steps to install the drivers: 1 T urn on your computer .
EN 15 4 In the Open window click the arrow below Drives: and select your CD-ROM drive. Click wn1394.inf in the file list. Then click the OK button. 5 In the Install From Disk window click the OK botton. 6 After the installation is complete we recommend you restart your computer .
16 EN CONNECTING AND TROUBLESHOOTING CONNECTING DV DEVICE 1 Plug the included DV cable ’ s larger connector into the socket on the DV Capture Board. • Confirm that the connector is securely plugged in. 2 Plug the DV cable ’ s smaller connector into the camcorder ’ s DV OUT/IN socket.
EN 17 TROUBLESHOOTING FOR DV CAPTURE BOARD If you are experiencing problems when using DV Capture Board, check the following items: • The DV Capture Drivers are not installed. • The PCI expansion slot must be a 5V bus master PCI expansion slot. Refer to your computer ’ s manual and seat the DV Capture Board in the PCI expansion slot firmly .
18 EN About W indows ® 95 basic operation, refer to the instructions of W indows ® 95 or your compu- ter . PREP ARA TION 1 Start W indows. 2 Close all open windows and toolbars. Close any icons shown on the task bar . 3 Confirm that programs are not displayed on the task bar .
EN 19 ST ARTING UP VIDEO NA VIGA TOR Caution • Do not remove the DV device and turn off the power of DV device while V ideo Navigator is running. FINISHING VIDEO NA VIGA TOR 1 At Index window , click File menu and Exit . Or click the closing button.
20 EN INST ALLING PHOTOSUITE SE Using MGI PhotoSuite Starter Edition (SE), you can transform or enhance the pictures you take by altering colors, making collages, and more. Put your photos into posters, calendars and greeting cards. Y ou ’ ll see your photos in a whole new light.
EN 21 INST ALLING VIDEOWORKS Presto! V ideoW orks enables you to manage and edit in detail on your computer screen video sequences as well as sounds (A VI files), or video/audio fragments captured from video devices such as a VCR, a laser disc player , a Camcorder , etc.
22 EN INST ALLING ACROBA T READER The V ideoW orks Manual File is supplied as acrobat data file. In case it cannot be opened, you should install Adobe Acrobat Reader . 1 Insert the included CD-ROM into the CD-ROM drive. 2 Click Start menu and select Run.
EN 23 ST ARTING UP VIDEOWORKS 1 Click Start on the task bar . 2 Select Program and Presto! V ideoW orks and click Presto! V ideoW orks . Then V ideoW orks will start up. MEMO • Close all open windows and toolbars. Close any icons shown on the task bar .
24 EN V ideoW orks makes an action file from images captured by V ideo Navigator . The action movie can be adjusted to smooth action by morph function.Y ou can view the action file as like a movie because the snapshots related with time are connected continuously and displayed with frame-playback.
EN 25 5 Click one of the image files in Open window . 6 Click Open button. • The image files in same folder are imported and action movie is made with them. • Media V iewer window is displayed. • Processing time for importing depends on the settings of Import Options window .
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD. Printed in Japan 0998MNV * SN * SN VICTOR COMP ANY OF JAPAN, LIMITED U BEFORE OPERA TION.
An important point after buying a device JVC VIDEO NAVIGATOR GV-DV1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC VIDEO NAVIGATOR GV-DV1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC VIDEO NAVIGATOR GV-DV1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC VIDEO NAVIGATOR GV-DV1000 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC VIDEO NAVIGATOR GV-DV1000 will certainly help you make a decision on the purchase.
If you already are a holder of JVC VIDEO NAVIGATOR GV-DV1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC VIDEO NAVIGATOR GV-DV1000.
However, one of the most important roles played by the user manual is to help in solving problems with JVC VIDEO NAVIGATOR GV-DV1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC VIDEO NAVIGATOR GV-DV1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
