Instruction/ maintenance manual of the product UX-Q3S JVC
Go to page of 32
MICRO COMPONENT SYSTEM For hiding the demonst ration display, refer to page 9. UX-Q3S Consist s of CA-UXQ3S and SP-UXQ1S INSTRUCTIONS L VT1218-005A [A] UX-Q3S[A]-01.
G-1 Introd uction W arnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS CAUTION T o reduce the risk of electr ical shocks , fire, etc.: 1. Do not remov e screws , cov ers or cabinet. 2. Do not expose this appliance to rain o r moisture. CAUTION — F button! Disconnect the ma ins plug to shut the power off completely .
G-2 CAUTION — Proper Ventilation T o av oid risk of electric shock and fire and to pr otect from damage, locate the apparatus as f ollows: T op/F ron t/Back/Sides: No obstructions should be placed in the areas shown b y the dimensions below . Bottom: Place on the lev el su rf ace.
1 T able of Content s Notes on Operation .............................. 2 Special Cautions................................... 3 Notes on Handling.. .................... ............. 3 Supplied Accessories ............. ................. 3 Part Description .
Introducti on 2 Introduction Notes on Operation T o minimize the need for servicing and maintain the high quality of this product, do not place the main unit in the following locations: • In a posit.
3 S pecial Cautions ■ Important cau tions Installation of the system • S elect a place which is le vel, dry and neither too hot nor too cold; betwe en 5 ° C and 35 ° C. • Leave sufficient dist ance between the system and the TV . • Do not use the system in a place subject to vibration .
Introducti on 4 Prep aration Preparatio n Part Description * This terminal is for con necting a pair of headphones equipped with a stereo mini plug (commercially avail- able). While the headphones are connected, the speakers do not produ ce any sound.
5 Remote Control CAUTION • Do not use a used battery and a new battery together . • Do not use different types of batteries at the same time. • T ake out the batteries if the remote control is not to be used for a long time. Otherwise it may cause a leakage.
Introducti on 6 Prep aration Connections 1 Set up the AM loop antenna (supplied). 2 Connect the antenna cord. 3 T urn the AM loop antenna to find the best position for radio reception.
7 (Continued) Connections S t retch out the FM antenna to the best position for radio reception, and then fix it with adhesive tape. ■ When radio reception with the supplied FM antenna is poor , or .
Introducti on 8 Prep aration There is no difference between the left an d right speakers. CAUTION • Do not short-circuit the and speaker termi- nals. Doing so may damage the speakers. • Do not connect other speakers together with the supplied speakers.
9 (Continued) Connections CAUTION • Befor e connecting other equipment, turn off both the main unit and other equipment. • After making all other necessary connections, connect in th e power plug. When you connect the power plug into the AC out- let, "DEMO ST ART!" appears in the display win- dow and the demonstration disp lay starts.
10 Basic Operations Basic Ope rations Basic Operations About this manual • This manual explains the operati ons assuming that you wil l use the remote con- trol. Some buttons on the main unit are the same as those on the re mote control. Y ou can use either button in this case.
11 (Continued) Basic Operations Press (or on the main unit). • With the power o ff, pressing either button turns on the main unit. Remote control: Main unit: Pressing one of these buttons othe r than changes the sound source. When a CD or cassette tape has been loaded, play- back starts.
12 Basic Operations NOTE • While th e sound mode is activated, "NO OPER- A TE" is displayed and you cannot adjust the sound quality ( page 1 1). Canceling the sound mode returns both the bass and treble sounds to "0". Press . • Each time you press , the display tog- gles as follows.
13 (Continued) Basic Operations 3 Press to adjust the intensity of the component color . • Y ou can ad just the colo r intensity within the range "0" to "3 ". Y ou cannot set all three component colors (red, green, and blue) to "0" at the same time.
14 Listeni ng to Radi o Broadcasts Listening to Radio Broadcasts Listening to Radio Broadcast s This product can receive FM and AM radio broad- casts. 1 Press to select "FM" or "AM". Example: Display wh ile an FM radio broadcast is received.
15 (Continued) Listening to Radio Broadcasts Y ou can store up to 30 FM radio stations and up to 15 AM radio stations. ■ While the broadcast from the radio station you want to preset is being received 1 Press . • The preset number fl ashes for approxi- mately 5 se conds.
16 Listening to CDs Listening to CDs Listening to CDs This product can play back CDs and finalized CD- Rs/CD-RWs (recorded in audio CDs or MP3 for- mat). 1 Press on the main unit. • The CD tray comes out. 2 Place a CD on the CD tray . • When you want to listen to an 8 cm CD, place it on the inner hollow of the CD tray .
17 (Continued) Listening to CDs Press the number buttons to select the track you want to listen to. • Refer to "Using the number buttons" ( page 10). This function allows you to repeatedly listen to the same track. During CD playback, press repeat- edly to select the repeat mode.
18 Listening to CDs While playback is stopped, press or repeatedly . • Y ou can ad d a track as the last track in the program, or erase the last track. ( step 3 on page 17) While playback is stopped, press repeatedly to display an i tem other than "PROGRAM".
19 Listening to Casset te Ta pes Listening to Cassette T apes 1 Insert a cassette t ape. CAUTION • Before using a cassette tape, wind up any slack in the cassette tape. ( page 27) • Do not use long cassette tapes such as C-120 or C-150. Long cassette tapes are thin and stretch easily , and may become tangled in the inner part of the main unit.
20 Listening to Cassette T apes/Listening to Other Equip ment Listeni ng to O ther Eq uipment Listening to Other Equipment Y ou can listen to sound from other audio equip- ment connected to the AUX terminals on the rear side of the main unit ( page 9).
21 Recording Sound Recording Sound to Cassette T apes Main unit Remote control NOTE • T he sound input level during recording is automatically adjusted. • When you r ecord tracks from a CD or MP3, a 4- second blank is inserted between tracks in the recording.
22 Recording Soun d Example: Display wh ile CD sound is recorded. • When all tracks from a CD or MP3 are recorded to the cassette tape or the cassette tape is fully wound, the recording stops automatically . • When you want to record sound from other equipment, start playback on the connected equipment.
23 Convenient Fu nctions Using the T imers When the specifie d time passes, th e main unit automatically turns off. Press . • Each time you press , the time display (in minutes) toggles as follows. Example: T o set the sleep timer to 60 minutes NOTE • When you set the sle ep timer , the display window automatically dims.
24 Convenient Function s 6 Press or to select "ONCE" or "EVER YDA Y". ONCE : The recording timer works once. EVERYDA Y: The recording timer works every day . 7 Press . 8 Press or to select "REC TIMER". • "REC" stands for "Recording".
25 (Continued) Using the T imers 1 Prep are the sound source you want to play back . 2 Press repeatedly to select "TIMER1", "TIMER2" or "TIMER3". Example: When "T IMER2" is selected 3 Press . 4 Set the st arting time and ending time.
26 Convenient Function s NOTE • Durin g operation, you can return to the previous step by pressing . Y ou can quit the playback timer settings by pres sing . The settings are not stored. • When the playback timer starts, the volume grad- ually increases to the selected level.
27 Reference Handling CDs/Cassette T apes • Do not put adhesive tape or stickers, or write on a CD. • Do not bend a CD. • Be sure not to use heart/flower shaped CDs or other irregularly shaped CDs. The use of such CDs damages the main uni t. • Be sure not to use thinners, benzenes, cleaners for analog records, or other chemical agents.
28 Reference CD Messages T roubleshooting Check the following points before contacting the JVC service center . CD message Meaning Possible solution CANNOT PLA Y Y ou are trying to play back an unplaya ble CD or a CD that has many scratches. Replace the CD.
29 S pecifications ■ CD receiver (CA-UXQ3S) Amplifier Output power 20 W + 20 W at 4 Ω (10% THD) Input terminal s <Analogue> AUX×1, 500 mV/47 k Ω :LEVEL1 250 mV/47 k Ω :LEVEL2 Output ter.
An important point after buying a device JVC UX-Q3S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-Q3S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-Q3S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-Q3S you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-Q3S will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-Q3S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-Q3S.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-Q3S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-Q3S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
