Instruction/ maintenance manual of the product UX-P7R JVC
Go to page of 28
GVT0055-008A [B] For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference . Model No . Se r ia l N o. UX-P7R — Consists of CA-UXP7R and SP-UXP7.
UX-P7R Front view Side view Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.
– 1 – Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons on the remote contr ol. Y ou can use the buttons both on the r emote control and on the unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise.
– 2 – Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – COMPACT DIGITAL AUDIO CD T APE FM/AM MICRO COMPONENT SYSTEM UX·P7R CD-R/RW PLA YBACK MD/AUX TIMER CLOCK STANDBY / ON STANDBY / ON VOLUME AHB PRO SOUND AUTO REVERSE REC REC REV .MODE PHONES q 8 o ; a d 7 r s 1 2 3 4 5 6 9 p w e t y u i / Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit.
– 4 – See pages in the parentheses for details. Front Panel 1 Remote sensor 2 (ST ANDBY/ON) button and ST ANDBY/ON lamp (9, 16, 21) 3 AHB (Activ e Hyper Bass) PRO + / – control (10) 4 SOUND button (10) 5 CD 3 / 8 (play/pause) b utton (9, 14, 19) Pr essing this button also turns on the unit.
– 5 – SLEEP ST ANDBY/ON MD/AUX FM/AM T APE CD DISPLA Y DIMMER REPEA T RANDOM PROG FM MODE AUTO PRESET SOUND MODE CD CANCEL MUL TI KEY SET DISPLA Y MODE PTY /EON RM-SUXP7R REMOTE CONTROL VOLUME AHB.
– 6 – Getting Started Supplied Accessories Make sure that y ou have all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) • Speaker cor ds (2 sets) If anything is missing, consult your dealer immediately .
– 7 – RIGHT SPEAKER IMPEDANCE MIN 6 SPEAKER IMPEDANCE MIN 6 LEFT RIGHT LEFT MAIN SPEAKERS SUBWOOFERS 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. • If the AM loop antenna wire is cov ered with vinyl, remo ve the vinyl by twisting it as shown in the dia gram.
– 8 – Speaker grille T o remo ve the speaker grille, inserting your f ingers at the top of the speaker grille, pull to wards you. Then pull the bottom to wards you. T o attach the speaker grille, put the projections of the speaker grille into the holes of the speaker .
– 9 – Common Operations T urning On the Power When you press the play b utton — CD 3 / 8 , T APE 2 3 , or the source selecting button — FM/AM, and MD/A UX, the unit automatically turns on and starts playback if the source is ready . T o turn on the unit, press (ST ANDBY/ON).
– 10 – Reinforcing the Bass Sound Y ou can reinforce the bass sound to maintain rich, full bass at low v olume. This function only af fects the playback sound, but does not af fect your recording. When using the remote control, press AHB PR O LEVEL + to increase the bass sound or press AHB PR O LEVEL – to decrease it.
– 11 – Listening to FM and AM (MW/L W) Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned sta tion (either FM or AM — MW/L W). • Each time you press the button, the band alternates between FM and AM (MW/L W).
– 12 – Receiving FM Stations with RDS RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular pr ogram signals. For e xample, the stations send their station names, as well as information about what type of program the y broadcast, such as sports or music, etc.
– 13 – Switching to a Program T ype of Y our Choice T emporarily By recei ving EON (Enhanced Other Networks) data sent by FM RDS stations, the EON function allo ws the unit to switch temporarily to a broadcast program of your choice (T A, NEWS, and INFO) from a dif ferent station.
– 14 – Playing Back CDs (CD/CD-R/CD-RW) This unit has been designed to playback the follo wing CDs: •C D • CD-R • CD-R W Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. General Notes In general, you will hav e the best performance by keeping your CDs and the mechanism clean.
– 15 – MULTI KEY T rack number Program step number PRGM PRGM SET Programming the Playing Order of the T racks — Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can program up to 20 tracks. 1 Load a CD .
– 16 – Prohibiting Disc Ejection — T ray Lock Y ou can lock the disc tray and prohibit to eject the CD. • This is possible only while the unit is turned on. On the unit ONL Y : T o prohibit disc ejection, press (ST ANDBY/ON) while holding 7 . (If the disc tray is opened, close it first.
– 17 – Playing Back T apes Y ou can play back type I, type II, and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess 0 for cassette deck. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder gently .
– 18 – Recording Recording on a T ape On the unit ONL Y : 1 Put a recordable cassette in with the e xposed part of the tape down. 2 Close the cassette holder gently . • If you want to record on both sides of a tape, see “T o record on both sides — Re verse Mode.
– 19 – CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you ha ve made for Program play . On the unit ONL Y : 1 Put a r ecordable cassette in with the exposed part of the tape down.
– 20 – Using the T imers Continued There are three timers a vailable — Daily T imer, Recor ding T imer and Sleep T imer . Before using the timers, you need to set the clock built in the unit (see page 9). When you press TIMER on the unit for more than 3 seconds, the display alternates between “ ADJUST” and “CLOCK” for about 5 seconds.
– 21 – 6 Pr ess TIMER to complete the timer setting . 7 Pr ess (ST ANDBY/ON) to turn off the unit (on standby) if y ou ha ve set the timer with the unit turned on. • When the timer turns on the unit, the timer ( ) indicator and the selected timer mode indicator (D AIL Y or REC) start flashing.
– 22 – Classification of the PTY codes for some FM stations may be different from the above list. Description of the PTY codes: NEWS :N e w s . AFF AIRS : T opical program expanding or enlar ging upon the news — debate, or analysis. INFO : Program the purpose of which is to impart advice in the widest sense.
– 23 – Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
– 24 – Specifications UX-P7R (CA-UXP7R and SP-UXP7) Amplifier Output Po wer SUBWOOFERS: 110 W (55 W + 55 W) at 6 Ω (MAX.) 70 W (35 W + 35 W) at 6 Ω (10 % THD) MAIN SPEAKERS: 36 W (18 W + 18 W) at 6 Ω (MAX.
VICT OR COMP ANY OF JAP AN, LIMITED EN 0301MWMMDWJEM UX-P7R[B]_Cover 01.3.14, 1:39 PM 2.
An important point after buying a device JVC UX-P7R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-P7R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-P7R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-P7R you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-P7R will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-P7R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-P7R.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-P7R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-P7R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
