Instruction/ maintenance manual of the product UX-M6VUB JVC
Go to page of 27
For Customer Use: Enter below the Model No . and Serial No . which are located either on the rear , bot- tom or side of the c abinet. Retain this inf ormation for future ref erence.
– G-1 – W arnings, Cautions and Others Caution — STANDBY/ON button! Disconnect the mains plug to shut the power off completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled. CA UTION T o reduce the risk of electr ical shocks , fire, etc.
– G-2 – Caution: Proper V entilation T o av oid r isk of electric shock and fire , and to pre vent damage, locate the appar atus as follo ws: 1 F ront: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
English – 1 – Introduction W e would like to thank y ou for pur chasing one of our JVC pr oducts. Bef ore operating this unit, read this manual carefully and thor oughly to obtain the best possib le perf ormance fr om your unit, and retain this manual f or future reference .
English – 2 – Contents Location of the Buttons and Controls ..................... 3 Front Panel ................................................................ 4 Remote Control ......................................................... 5 Getting Started .
English – 3 – Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel DISPLA Y MIC PROGRAM REC DIRECTION PLA Y/PA USE VOLUME STOP/CLEAR DEMO SEARCH/TUNING SHUFFLE TUNER T APE BAND REV .
English – 4 – Continued Front Panel See pages in the par entheses for details. 1 Disc compartment (12) 2 ST ANDBY/ON button (8) T ur ns the unit on or of f (standby mode). 3 CD/SHUFFLE button (12, 14) Selects CD/VCD mode. Starts or stops shuffle play in CD/VCD mode .
English – 5 – Remote Control 1 ST ANDBY/ON button 2 CD/SHUFFLE button 3 TUNER/B AND button 4 PR OGRAM button 5 REC (Recording) b utton 6 DISPLA Y button 7 7 button 8 Number buttons CD/VCD/MP3-CD: select a trac k number . T uner: select a pr eset radio station.
English – 6 – Continued Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in the parentheses follo wing each item name indicates the supplied quantity .
English – 7 – 2 Connect the supplied AM loop antenna to the AM LOOP terminal. Place the antenna aw ay from the unit and adjust its position for the best reception. 3 Connect the supplied FM wir e antenna to the FM 75 Ω CO AXIAL jack. Adjust the position of the FM antenna for the best reception.
English – 8 – Common Operations T urning On or Off the Unit T o turn on the unit Press ST ANDBY/ON on the unit or remote control. The unit turns on with the last source selection remaining v alid. T o turn off the unit (on stanby) Press ST ANDBY/ON on the unit or remote control.
English – 9 – Demonstration Mode The unit has a demonstration mode that sho ws various features of fered by the unit. T o activate the demonstration In standby mode, press REPEA T/DEMO. The demonstration begins. T o deactivate the demonstration Press REPEA T/DEMO again or ST ANDBY/ON.
English – 10 – T uning In a Station 1 Pr ess TUNER/BAND to select tuner mode. The unit automatically turns on, and tunes in the last station tuned in (either FM or AM). 2 Pr ess TUNER/BAND to select the band, FM or AM. Each time you press the button, the band selection alternates between FM and AM.
English – 11 – T uning In a Preset Station 1 Pr ess TUNER/BAND to select tuner mode. 2 Pr ess TUNER/B AND to select the band, FM or AM. 3 Pr ess 8 / 2 or 3 / 8 repeatedly to select the desir ed preset number . • Alternati vely , use the number buttons on the remote control.
English – 12 – Playing Back CDs/VCDs/MP3-CDs This unit can play back all digital audio CDs, video CDs (VCDs), f inalized digital audio CD-Recordable (CD-R) discs and finalized digital audio CD-Re writable (CD-R W) discs.
English – 13 – Playing Back a Disc 1 Load a disc. • See “Loading a Disc” on the previous page. 2 Pr ess 3 / 8 to start playback. The track number and elapsed playing time of the current track appear on the display . 3 T o stop playback, press 7 .
English – 14 – Continued T o clear the program Press 7 in stop mode. “PR OG CLEARED” scrolls through the display and the PR OG. indicator goes off. • The stored program is cleared when the CD compartment is opened. On the display , “P” represents PR OGRAM and “T” represent TRA CK.
English – 15 – On Screen Display (OSD) for a CD/VCD If you insert a CD/VCD, your TV screen will serve as an additional display for messages (such as PLA Y , STOP , etc.) and information stored on the VCD/CD. Press OSD/DIM r epeatedly to select the inf orma tion to display .
English – 16 – A-B REPEA T This feature is also applicable to the audio CD (e xcept MP3- CD). A certain scene or passa ge of the disc can be play ed back repeatedly . 1 Press A-B on the remote control during playing a CD/VCD to mark the repeat start point.
English – 17 – Playing Back T apes • Use only type I normal tapes. The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinchrollers and the capstans. Loading a T ape 1 Pr ess 0 EJECT to open the tape deck door .
English – 18 – Recording Recording T apes 1 Load a r ecordable tape into the tape deck. 2 Pr ess T APE/REV .MODE repeatedly to either r ecord one side or both sides of the tape.
English – 19 – Karaoke Microphone Mixing Microphone mixing is a vailable in CD/VCD mode. Connecting a microphone (not supplied) to the unit allo ws you to sing along with the music source. 1 Connect a micr ophone to the MIC jack. 2 Start playing a CD or VCD.
English – 20 – Using the T imers There are three timers a vailable — daily timer , recording timer and sleep timer . Before using the timers, you need to set the built-in clock. (See page 8.) Using Daily Timer W ith the daily timer , y ou can wak e to your fav orite music or radio program.
English – 21 – Using Sleep T imer W ith the sleep timer , you can fall asleep to music. Y ou can set the sleep timer using the remote control when the unit is turned on. How the sleep timer actually works The unit automatically turns off after the specif ied time length passes.
English – 22 – Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Cassette decks If the heads, capstans, and pinch rollers of the cassette deck beco.
English – 23 – Symptom No sound is heard. Po wer cannot be turned on. The disc does not play . The disc sound is discontinuous. No picture is displayed on TV screen. No color is sho wn on TV screen. Hard to listen to broadcasts because of noise. T ape playback sound is at a very low le vel.
0901NNMBICORI EN, CH VIDEO OUT FM 75 Ω COAXIAL AM LOOP AC 110-127V AC 220-240V VOLTAGE SELECTOR + – + – R L A C 110-127V A C 220-240V V O LTA G E SELECT OR IMPORTANT for mains (AC) line BEFORE P.
An important point after buying a device JVC UX-M6VUB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-M6VUB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-M6VUB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-M6VUB you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-M6VUB will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-M6VUB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-M6VUB.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-M6VUB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-M6VUB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
