Instruction/ maintenance manual of the product UX-G500V JVC
Go to page of 50
MICRO COMPONENT SYSTEM UX-G500V —Consists of CA-UXG500V and SP-UXG500V SUPER VIDEO INSTRUCTIONS GVT0249-006A [US/UB/UN/UG/UX/A/UH/UW] Cover_UX-G500V[U]f.
G-1 Warnings, Cautions and Others CAUTION The button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
G-2 Caution: Proper Ventilation To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
1 How to Read This Manual • Button and control operations are explained in the table below. • Some related tips and notes are explained later in the sections “Learning More about This System” and “Troubleshooting,” but not in the same section explaining the operations ( INFO indicates that the content has some information).
2 Connections ............................................................ 4 Display Indicators .................................................... 7 Daily Operations—Playback .................................... 8 Listening to the Radio ..........
3 Playable Disc/File Types DIGITAL VIDEO SUPER VIDEO COMPACT DIGITAL AUDIO • CD-R/-RW: Recorded in the Audio CD, Video CD, and SVCD formats. MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2 and DivX files written in accordance with the “ISO 9660” format can also be played.
4 Connections INFO Do not connect the power cord until all other connections have been made. • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back copy- protected discs/files.
5 ~ AM/FM antenna To assemble the AM loop antenna To connect AM/FM antenna For better FM reception Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector. AM loop antenna (supplied) Turn it until the best reception is obtained.
6 ⁄ To connect the powered subwoofer The connected subwoofer can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals encoded in multi-channel software. • Before plugging the System to the power supply, make sure that the powered subwoofer is turned off.
7 Display Indicators The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicators illuminate on the display. q Radio band indicators • AM: lights when tuning in to an AM station.
8 Daily Operations— Playback In this manual, operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. 1 Turn on the power. The STANDBY lamp on the main unit turns off.
9 To select the band (FM or AM) To tune in to a station While FM or AM is selected... Frequency starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing. • When you repeatedly press the button, the frequency changes step by step.
10 3 Select a preset number for the station you store. • To select a number, see “How to select a number” on page 9. • You can also use the ¡ or 1 button. 4 Store the station. To tune in to a preset station Remote ONLY 1 Select the band (FM or AM).
11 To select a title/group Remote ONLY • Not applicable for DVD-VR. While playing... To select a chapter/track/file • For VCD/SVCD, cancel PBC (see page 12). While playing... • When you press 4 for the first time, you will go back to the beginning of the current chapter/track/file.
12 To locate an item directly Remote ONLY You can select a title/chapter/track/file directly and start playback. • For DVD Video, you can select a title before starting playback , while you can select a chapter after starting playback . • To select a number, see “How to select a number” on page 9.
13 To drop the volume in a moment Remote ONLY To restore the volume, press again, or adjust the volume level. Adjusting the Sound INFO To activate EALA surround mode As the number of the surround mode increases, the surround effect becomes stronger. To reinforce the heavy sound This boosts the low and high frequency sound—Sound Turbo II.
14 Canceled To adjust the tone Remote ONLY You can adjust the bass and treble level from –3 to +3. To adjust the bass To adjust the treble Creating a Soothing Tone for your Ear —MY SOUND Remote ONLY Each individual response to audio frequency differently.
15 Presetting Automatic DVD Sound Increase Level Remote ONLY DVD sound is sometimes recorded at a lower level than other discs and sources. You can set the increase level for the currently loaded DVD, so you do not have to adjust the volume when you change the source.
16 Setting the ECO (ecology) Mode Setting the ECO mode allows you to reduce power consumption by turning the display off while on standby. While the System is on standby... Changing the Color System and Scanning Mode INFO Remote ONLY You can select the video output to match it to the color system of your TV (NTSC or PAL).
17 To adjust the picture tone 1 Select “USER1” or “USER2.” • Follow steps 1 and 2 explained in “To select a preset picture tone.” 2 Select a parameter you want to adjust. GAMMA Adjust if the neutral color is bright or dark (–3 to +3). BRIGHTNESS Adjust if the entire picture is bright or dark (–8 to +8).
18 Turning Off the Power Automatically Remote ONLY Auto Standby • This only functions while playing a disc or USB mass storage class device. A.STBY indicator lights on the display.
19 USB 6 DVD/CD 6 ZOOM SUBTITLE A UDIO/MPX SL OW , Unique Video Disc/File Operations Remote control Selecting the Audio Track INFO Remote ONLY For DivX files/DVD Video: While playing back a chapter/ file containing several audio languages, you can select the language to listen to.
20 Selecting the Subtitle Language Remote ONLY For DivX files/DVD Video: While playing back a chapter/ file containing subtitles in different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off.
21 Special Effect Playback INFO Still picture playback To display the still picture: To resume normal playback, press either button again. Frame-by-frame playback Remote ONLY • This function is used only while playing DVD Video/ DVD-VR/SVCD/VCD. 1 While playing.
22 Advanced Playback Operations Remote control Number buttons Programming the Playing Order —Program Play INFO Remote ONLY You can arrange the playing order of the chapters/tracks/ files (up to 99) before you start playback. • Program play cannot be used for the USB mass storage class device, DVD-VR and JPEG/MPEG-1/MPEG-2/ DivX files on a disc.
23 To check the programmed contents Before or after playback... • You can also use 4 or ¢ to check the programmed contents. To modify the program Before or after playback... To erase the last step: To erase the entire program: To add another step in the program: Repeat step 2 on page 22.
24 Playing Repeatedly INFO Remote ONLY • For DVD Video/DVD-VR/SVCD/VCD/CD: You can also select the repeat mode using the on-screen bar (see pages 30 and 31). For DVD Video: While playing... For CD/SVCD/VCD: While playing (without PBC for SVCD/VCD) or before playback.
25 Recording and Editing Operations INFO Remote control Before You Start Recording • It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
26 Recording from a Disc You can record tracks in digital recording from a CD onto the USB device. • Do not vibrate the System while recording/editing tracks. Take care especially while “WAIT” is shown on the display. It may damage the recorded tracks on the System.
27 Entering Titles Remote ONLY 1 Select the character type. 2 Enter a character. • Several characters are assigned to one button. Press the button repeatedly until the desired character is displayed. • For available characters, refer to “Available Characters” below.
28 To move the character entry position To erase a character When the character entry position is on the character you want to erase... To enter a space Select the space from “Symbols.” (See “Available Characters” on page 27.) • You can also enter a space at the end of a title by pressing 3 .
29 DVD/CD 6 ON SCREEN USB 6 On-Screen Operations Remote control On-screen Bar Operations INFO Remote ONLY You can check the source information (disc/USB mass storage class device) and playback status by using the on-screen bar (not applicable for MP3/WMA/WAV/JPEG files).
30 To operate using the On-screen Bar Ex.: Selecting a subtitle (French) for DVD Video While “DVD/CD” is selected as the source... 1 Display the entire on-screen bar. * This does not appear for MPEG-1/MPEG-2/DivX files. 2 Select (highlight) the item you want.
31 4 Select the repeat mode you want. A-B Repeats a desired portion (see below). TITLE * Repeats the current title. ALL Repeats the disc (not applicable for DVD) or programmed track. CHAPTER ** Repeats the current chapter. TRACK ** Repeats the current track.
32 Chapter Search For DVD Video/DVD-VR: You can search for the chapter number to play. • This function is not available during Program Play and Random Play. 1 While playing, display the entire on-screen bar. 2 Select CHAP . . 3 Display the pop-up window.
33 Control screen for MP3/WMA/WAV/JPEG/MPEG-1/ MPEG-2/DivX files The control screen appears on the TV when the System detects MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/DivX files on the loaded disc or connected USB mass storage class device. • For JPEG/MPEG-1/MPEG-2/DivX, it appears when playback is stopped.
34 Daily Timer Operations CANCEL A UDIO CL OCK/TIMER Remote control Setting the Daily Timer INFO Remote ONLY Using Daily Timer, you can wake up with your favorite music. You can store three Daily Timer settings; however, you can activate only one of the timers at any one time.
35 1 Set the hour then the minute for on-time. 2 Set the hour then the minute for off-time. 3 Select the playback source—“TUNER-FM,” “TUNER-AM,” “DISC,” “AUDIO IN,” or “USB.” 4 For “TUNER-FM” or “TUNER-AM”: Select a preset channel.
36 SET UP Setup Menu Operations INFO Remote control Initial Settings Remote ONLY You can change the settings of the System. • The Setup Menu can be used only when “DVD/CD” or “USB MEM’ is selected as the source. 1 Press SET UP while playback is stopped.
37 Menu Item Contents PICTURE PICTURE SOURCE You can obtain optimal picture quality by selecting the source type of the video source. AUTO : Normally, select this option. The System recognizes the picture type (film or video source) of the current picture according to its information.
38 Additional Information Learning More about This System Connections (see pages 4 to 6) • Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the power cord.
39 • For JPEG files playback... – It is recommended that you record a file at 640 x 480 resolution. (If a file has been recorded at a resolution of more than 640 x 480, it will take a long time to be shown.) – This System can play back JPEG files with the extension code <.
40 Recording and Editing Operations (see pages 25 to 28) • Do not vibrate the System while recording/editing tracks. Take care especially while “WAIT” is shown on the display.
41 Troubleshooting General Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference.
42 Recording and Editing Operations Unable to record into the USB device. ] The capacity of the USB device is full. Erase some tracks. ] There have been 999 tracks or groups on the USB device you want to record into. Erase unwanted tracks. ] The USB device is write-protected.
43 Language Code List AA Afar GD Scots Gaelic MI Maori SN Shona AB Abkhazian GL Galician MK Macedonian SO Somali AF Afrikaans GN Guarani ML Malayalam SQ Albanian AM Ameharic GU Gujarati MN Mongolian S.
44 Optical Digital Out Signals DIGITAL AUDIO OUTPUT Output Signals Playback disc/file STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY DVD Video with 48 kHz, 16/20/24 bit Linear PCM 48 kHz, 16 bit Linear PCM * w.
45 USB section Playable files: MP3/WMA/WAV/JPEG/MPEG-1/ MPEG-2/DivX format USB specification: Compatible with USB 2.0 Full Speed Compatible device: Mass storage class Compatible system: FAT16, FAT32 B.
46 Parts Index Remote control Main unit This remote control can also operate JVC’s TVs (see page 44). Remote control Name Page AUDIO/TV u 8, 35 7 a 10, 12, 22, 23, 25, 26, 28, 38 1 , ¡ 4 10, 31 4 ,.
UX-G500V 0508WMKMDWJMM © 2008 Victor Company of Japan, Limited EN MICRO COMPONENT SYSTEM Rear_UX-G500V[U]1.indd 1 Rear_UX-G500V[U]1.indd 1 3/11/08 12:59:01 PM 3/11/08 12:59:01 PM.
An important point after buying a device JVC UX-G500V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-G500V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-G500V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-G500V you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-G500V will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-G500V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-G500V.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-G500V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-G500V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
