Instruction/ maintenance manual of the product UX-F72MD JVC
Go to page of 72
INSTR UCTIONS UX-F70MD — Consists of CA-UXF70MD and SP-UXF70MD UX-F72MD — Consists of CA-UXF72MD and SP-UXF72MD For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
– G-1 – Caution –– STANDBY/ON button! Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off). The STANDBY/ON button in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights red.
English CA UTION T o reduce the risk of electr ical shocks, fire , etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to r ain or moisture. – G-2 – CA UTION • Do not bloc k the ventilation openings or holes. (If the ventilation openings or holes are b lock ed by a newspaper or cloth, etc.
Front vie w Side view Caution: Proper V entilation T o av oid risk of electric shock and fire, and to pre vent damage , locate the apparatus as f ollows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
English – G-4 – REPR ODUCTION OF LABELS / CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. D ANGER : Invisib le laser radiation when open and interlock f ailed or def eated. A void direct e xposure to beam. 3. CA UTION : Do not open the top cov er .
– 1 – English Introduction About This Manual This manual is org anized as follows: • This manual mainly explains playback and editing operations using the remote contr ol, and the other operations such as recording operations using the buttons on the main unit.
– 2 – English Contents Recording on T apes ...................................... 35 Before Y ou Start Recording on a T ape ................. 36 Recording FM/AM Broadcasts ............................ 37 Recording CD — CD Synchronized Recording .
– 3 – English Location of the Buttons Become familiar with the b uttons on your unit. Main unit w e r AUTO REVERSE CASSETTE DECK F M / A M open/close STANDBY/ON COLOR AUX VOLUME TAPE EJECT MODE se.
– 4 – English See pages in the parentheses for details. Main Unit 1 FM/AM b utton (11, 15) • Pressing this b utton also turns on the unit. 2 COLOR b utton (9, 13) 3 ST ANDBY/ON button (11, 15) 4 CD open/close 0 button (18 – 20) • Pressing this b utton also turns on the unit.
– 5 – English Remote Control 1 DIMMER button (13, 57) 2 COLOR button (9, 13) 3 CLOCK/TIMER button (57 – 59) 4 MD GR OUP button (43 – 47, 54) 5 MD TITLE INPUT/EDIT b utton (43 – 47, 50 – 52.
– 6 – English Getting Started Unpacking Make sure that you ha ve all the following items. The number in the parenthesis indicates the quantity of the pieces supplied.
– 7 – English 1 If cords ar e covered with insula tion, twist the core of the cord at the end of each cord, then remo ve the insulation. 2 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 3 T urn the AM loop antenna until you ha ve the best rece ption.
– 8 – English RL – – + + RL SPEAKER IMPEDANCE MIN 4 Ω Connecting Other Equipment Y ou can connect the following equipment which can be used as a playback de vice. When you connect and use the equipment, refer also to its manual supplied. • DO NOT connect other equipment while the power is on.
– 9 – English Putting the Batteries into the Remote Control Insert the batteries — R6P(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and –) on the batteries with the + and – marking on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
– 10 – English Basic and Common Operations The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 11 to 13.
– 11 – English T urning On the Power When you press the play buttons (CD 3 / 8 , MD 3 / 8 , T APE 2 3 ) for a particular source or the FM/AM/A UX b utton (or FM/AM or A UX button on the main unit), the unit automatically turns on (and starts playback if the source is ready).
– 12 – English Adjusting the Volume Y ou can adjust the v olume lev el only while the unit is turned on. The v olume lev el has no effect on recording. T o increase the volume, press V OLUME + . T o decrease the volume, press V OLUME – . The volume le vel meter appears on the display .
– 13 – English Setting the Display Illumination Y ou can change the color and brightness of the display illumination. T o select the color pattern Y ou can select the color pattern by your pref erence. • If you press COLOR while the unit is turned off, the display illumination will start (see page 9.
– 14 – English Listening to FM and AM Broadcasts Remote control Main unit (T op view) The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 15 and 16.
– 15 – English Setting the AM T uner Interval Spacing Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing. When shipped, the built-in AM tuner is set to 9 kHz spacing.
– 16 – English 3 Press the number b uttons to select a preset number . Ex. For preset number 5, press 5. For preset number 15, press +10, then 5. For preset number 20, press +10, then 10. For preset number 30, press +10, +10, then 10. • Y ou can also select the preset number by pressing ¢ or 4 .
– 17 – English Playing Back a CD Main unit (T op view) The buttons emphasized in the illustration belo w are used and explained in this section (pages 18 to 21.) Remote control FM MODE 10 COLOR MD GROUP MD TITLE INPUT/EDIT CLOCK /TIMER DISPLA Y /CHARA MD TITLE SEARCH SOUND MODE AHB PRO SET CANCEL CD DIMMER 1 2 3 ENTER FM/AM /AUX REV .
– 18 – English Playing Back the Entire CD — Normal Play Y ou can play a CD. 1 Press CD open/close 0 on the main unit. The unit automatically turns on, the electronic swing panel slides upward, then the disc tray comes out. 2 Place a CD correctly on the cir cle of the disc tray with its label side up.
– 19 – English T o stop during play , press 7 . The follo wing informations appear . T o remo ve the disc, press CD open/close 0 . Basic CD Operations While playing a CD, you can do the follo wing operations. T o stop playback for a moment Press CD 3 / 8 .
– 20 – English T o check the program contents Before playing, you can check the program contents by pressing ¢ or 4 . • ¢ : Shows tr acks in the programed order . • 4 : Shows the programed tracks in the re verse order . T o modify the program Before or after playing, you can erase the last programed track by pressing CANCEL.
– 21 – English Repeating T racks — Repeat Play Y ou can have all the tracks, a program or the individual track currently playing repeat as many times as you lik e. On the remote contr ol ONL Y : T o repeat play , press REPEA T before or during play .
– 22 – English Playing Back an MD Main unit (T op view) The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 23 to 26.
– 23 – English T o stop during play , press 7 . T o remov e the MD, press MD open/close 0 . • After pulling out the MD, press MD open/close 0 again to close the electric swing panel. While the unit is pulling the MD into the MD loading slot : • DO NOT press MD open/c lose 0 .
– 24 – English Basic MD Operations While playing an MD, you can do the follo wing operations. T o stop playback for a moment Press MD 3 / 8 . The elapsed playing time start flashing on the display . T o resume playback, press MD 3 / 8 again. T o locate a particular point in a track during play Press and hold ¢ or 4 .
– 25 – English T o check the program contents Before playing, you can check the program contents by pressing 4 or ¢ . • 4 : Shows the programed tracks in the re verse order . • ¢ : Sho ws the tracks in the programed order . T o modify the program Before or after playing, you can erase the last programed track by pressing CANCEL.
– 26 – English 5 Press MD 3 / 8 . All the tracks in a group are played. Group play stops when all the tracks in a group are played once. T o stop during play , press 7 . T o exit from Group pla y mode, press PLA Y MODE repeatedly so that the unit enters another playback mode before or after play .
– 27 – English Playing Back a T ape Main unit (T op view) The buttons emphasized in the illustration belo w ar e used and explained in this section (pag e 28.) Remote control FM MODE 10 COLOR MD GROUP MD TITLE INPUT/EDIT CLOCK /TIMER DISPLA Y /CHARA MD TITLE SEARCH SOUND MODE AHB PRO SET CANCEL CD DIMMER 1 2 3 ENTER FM/AM /AUX REV .
– 28 – English T o stop during play , press 7 . T o fast-wind to the left or to the right, press 4 or ¢ . T o remove the cassette, press T APE EJECT 0 . T o play both sides — Reverse Mode Y ou can set the deck to play just one side of a tape, both sides once, or both sides continuously .
– 29 – English Recording on MDs Main unit (T op view) The buttons emphasized in the illustration belo w are used and explained in this section (pages 30 to 34.
– 30 – English Before Y ou Start Recording on an MD • It may be unla wful to record or play bac k copyrighted material without the consent of the copyright owner . • When you record onto a partially recorded MD, its contents are not erased or ov erwritten.
– 31 – English Stereo Long-Hour Recording (MDLP) On con ventional MD recorders, 2 times long-hour recording on MDs has been possible only in monaural sound, but this unit allo ws for 2 times or 4 times long- hour recording without losing stereo sound.
– 32 – English Recording FM/AM Broadcasts Y ou ha ve three methods (MODE 1/5 – 3/5) to record an FM or AM broadcast onto an MD. As for MODE 4/5 and 5/5, see page 37. On the main unit ONL Y : 1 Insert a recordable MD into the MD loading slot. 2 T une into a station you want.
– 33 – English On the main unit ONL Y : 1 Insert a recordable MD into the MD loading slot. • If the MD playback starts, press 7 to stop it. 2 Prepar e a source tape. After inserting a tape, press T APE 2 3 , then 7 before going to the next step.
– 34 – English Recording the External Equipment — Sound Synchronized Recording W ith this recording method, you can start recording automatically when the source sound comes into this unit through the LINE IN (A UX) jacks. Sound synchronized Recording will stop automatically if no sound comes into for more than 30 seconds.
– 35 – English Recording on T apes Main unit (T op view) The buttons emphasized in the illustration belo w are used and explained in this section (pages 36 to 39.
– 36 – English Before Y ou Start Recording on a T ape • It may be unlawful to record or play back copyrighted material without the consent of the copyright o wner . • The recording level is automa tically set correctly , so it is not affected by the VOLUME control.
– 37 – English Recording FM/AM Broadcasts Y ou have two methods (MODE 4/5 and 5/5) to record an FM or AM broadcast onto a tape. As for MODE 1/5 to 3/5, see page 32. On the main unit ONL Y : 1 Insert a recordable cassette into the cassette holder .
– 38 – English Recording the External Equipment Y ou hav e two methods (MODE 4/5 and 5/5) to record from external equipment onto a ta pe. As for MODE 1/5 to 3/5, see page 34. On the main unit ONL Y : 1 Insert a r ecordable cassette into cassette holder .
– 39 – English Recording CD onto an MD and a T ape — CD Synchronized Recording Y ou have six methods (MODE 10/15 – 15/15) to record a CD onto an MD and a tape at the same time. Using these synchronized recording methods, you can start and stop CD play , MD and tape recordings at the same time.
– 40 – English Editing MD Groups The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 41 to 47.) Remote control FM MODE 10 COLOR MD GROUP MD TITLE INPUT/EDIT CLOCK /TIMER DISPLA Y /CHARA MD TITLE SEARCH SOUND MODE AHB PRO SET CANCEL CD DIMMER 1 2 3 ENTER FM/AM /AUX REV .
– 41 – English T o add to the conventional MD Editing functions (called the track editing functions in this unit), MD Group functions helps you to classify the tracks by making groups on your MD. Classifying the tracks on an MD MDLP enables you to record more tracks on a single MD than usual.
– 42 – English Introducing MD Group Editing MD tracks can be grouped in many ways. The MD group editing includes the follo wing functions. Forming a gr oup (FORM GR) : Page 43 This function forms a series of tracks or a track in a ne w group. Adding a track to a group (ENTR Y GR) : Page 44 This function enters the selected track into a group.
– 43 – English Forming a Group — FORM GR This function allo ws you to form a group from a series of tracks which do not belong to the other groups. Y ou can form a group from a single track. Once a new group is for med, the other groups are renumbered.
– 44 – English 5 Press SET . • T o cancel the setting, press CANCEL, then repeat step 4 . 6 Press ¢ or 4 to select a gr oup. • During playback: The tracks in the selected group is played back repeatedly . 7 Press SET . “<ENTR Y GR>” appears on the display .
– 45 – English FORM GR? ENTRY GR? DIVIDE GR? UNGROUP? UNGR ALL? ERASE GR? Canceled JOIN GR? MOVE GR? GR 1 TITLE? 2 Pr ess MD TITLE INPUT/EDIT r epeatedly while pressing MD GR OUP to select “DIVIDE GR?” The source changes to “MD.
– 46 – English FORM GR? ENTRY GR? DIVIDE GR? UNGROUP? UNGR ALL? ERASE GR? Canceled JOIN GR? MOVE GR? GR 1 TITLE? Ungrouping T racks — UNGROUP This function allo ws you to dissolve a single group. Y ou cannot erase the tracks using this function.
– 47 – English Erasing T racks in a Group — ERASE GR This function allo ws you to erase a group together with tracks in the group. Y ou cannot r esume the tracks in the erased group. Once a group is erased, the other tracks and groups are renumbered.
– 48 – English Editing MD T racks The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 49 to 52.) Remote control FM MODE 10 COLOR MD GROUP MD TITLE INPUT/EDIT CLOCK /TIMER DISPLA Y /CHARA MD TITLE SEARCH SOUND MODE AHB PRO SET CANCEL CD DIMMER 1 2 3 ENTER FM/AM /AUX REV .
– 49 – English CDE C D E B A A B After joining track B T rack No. 1st 2nd 3rd 4th 5th 1st 2nd 3rd 4th Introducing MD T rack Editing MD tracks can be edited in many w ays.
– 50 – English 6 Press = or + to adjust the dividing point precisely . When you stop pressing the buttons, the unit r epeats the newly selected di viding point. • Y ou can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds* from the original point (Position 0).
– 51 – English DISC TITLE? MOVE ? ERASE? DIVIDE ? JOIN ? ALL ERASE? Canceled 3 Pr ess SET . • During playback: The current track number starts flashing. 4 Pr ess ¢ or 4 to select the two adjacent tracks y ou want to join. • Y ou can select the track using number buttons.
– 52 – English Erasing T racks — ERASE This function allo ws you to erase an unwanted track. Once tracks are erased, the other tracks and/or groups are renumbered. • T o stop any time during editing process, press MD TITLE INPUT/EDIT . On the remote contr ol ONL Y : 1 Insert an MD to edit.
– 53 – English Assigning T itles to an MD The buttons emphasized in the illustration belo w are used and explained in this section (pages 54 and 55.
– 54 – English 3 Press = or + to change the title entry mode. • Disc title and track title entry screen: Each time you press the button, the title entry mode changes as follows: • Group title .
– 55 – English 3) Repeat steps 5 – 1) and 5 – 2) to input other characters. • If the character you want to input next is assigned to the same button you ha ve just pressed in step 5 – 2) , press = f irst to move the char acter entry position to the right, then press the character entry button.
– 56 – English Using the T imers The buttons emphasized in the illustration belo w ar e used and explained in this section (pag es 57 to 60.) Remote control FM MODE COLOR MD GROUP MD TITLE INPUT/EDIT CLOCK /TIMER DISPLA Y /CHARA MD TITLE SEARCH SOUND MODE AHB PRO SET CANCEL CD DIMMER 1 2 3 ENTER FM/AM /AUX REV .
– 57 – English There are three timers a vailable — Recording Timer , Daily T imer , and Sleep Timer . Bef ore using these timers, y ou need to set the built-in clock. Setting the Clock Y ou can set the c lock whether the unit is turned on or of f (on standby .
– 58 – English 4 Select the media to be recorded on. 1) Press ¢ or 4 r epeatedly to select the media. 2) Press SET . • When you select “TO MD, ” select the recording length mode from “SP , ” “LP2, ” or “LP4” by pressing ¢ or 4 .
– 59 – English 2 Pr ess 4 to select “ON, ” then press SET . 3 Select the source to play . 1) Press ¢ or 4 re peatedly to select the source. • Each time you press the buttons, the source c hanges as follows: 2) Press SET . • When you select “FR OM FM” or “FROM AM, ” select a preset number by pressing ¢ or 4 .
– 60 – English T o sleep with the Sleep Timer and wake up with the Daily Timer The unit turns off when the shut-of f time comes (set by the Sleep T imer), and turns on when the timer-on time comes (set by the Daily T imer). 1 Set the Daily Timer as explained on pages 58 and 59.
– 61 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs and the mechanism clean. • Store discs in their cases, and keep them in cabinets or on shelves.
– 62 – English MD Disc T ypes There are two types of MDs: Premastered (prerecorded) and Recordable (blank). Premaster ed MDs Premastered MDs, which hav e been recorded at music studio, can be played back like re gular CDs. On an MD of this type, data is recorded as the presence or absence of tiny pits.
– 63 – English Cause There is a maximum number of tracks which can be recorded, regardless of recording time. More than 254 tracks cannot be recorded on an MD. Repeating erasure and recording on the same MD creates many blank portions sparsely on the MD.
– 64 – English MD/CD Messages Message BLANK DISC CANNO T ENTR Y! CANNO T FORM! CANNO T GR OUP! CANNO T JOIN CANNO T LISTEN! CANNO T TITLE CD PR OGRAM CANNO T X4 RECORDING! CD RANDOM CANNO T X4 REC.
– 65 – English Message SCMS CANN O T COPY TRA CK PR OTECTED X4 SPEED CANNO T COPY LOW TEMP CANNO T PLA Y CD LO AD ERR OR UNFIN ALIZE Signification Digital copy of the 2nd generation is prohibited. The track has been protected. The room temperature is too low to record using x4 speed-recording.
– 66 – English Specifications Amplifier Output Po wer (IEC 268-3/DIN): 32 W (16 W + 16 W) at 4 Ω (MAX.) 30 W (15 W + 15 W) at 4 Ω (10 % THD) Audio input sensiti vity/Impedance (at 1 kHz) LINE IN (A UX): 500 mV/47 k Ω Speaker T erminals: 4 Ω — 16 Ω T uner FM tuning range: 87.
EN, CH 0701MWMMDWJEM VICTOR COMP ANY OF JAP AN , LIMITED J V C UX-F70MD[UB]COVER_f 01.7.10, 2:54 PM 2.
An important point after buying a device JVC UX-F72MD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC UX-F72MD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC UX-F72MD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC UX-F72MD you will learn all the available features of the product, as well as information on its operation. The information that you get JVC UX-F72MD will certainly help you make a decision on the purchase.
If you already are a holder of JVC UX-F72MD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC UX-F72MD.
However, one of the most important roles played by the user manual is to help in solving problems with JVC UX-F72MD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC UX-F72MD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
