Instruction/ maintenance manual of the product TK-C215V4E JVC
Go to page of 32
DOME CAMERA TK-C210FW TK-C215V4 TK-C215V12 INSTR UCTIONS For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future referen ce. Model No . Serial No. LST0308-001C TK-C210FW/TK -C215V4/TK-C215V12 TK-S215_EN.
2 Intr oduction Informat ion for User s on Disposal of Old Eq uipment [Euro pean Union] This symbol indicates that the electr ical and electronic equi pment should not be disposed as general household waste at its end-of-life.
3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . (For U type) 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only (For USA), Isolated power supply only (F or Europe).
4 Intr oduction (continued) These are general IMPORT ANT SAFEGU ARDS and certain items may not appl y to all appliances. 1. Read all of these instructions. 2. Sav e these instructions for later use. 3. All warnings on the product and in the ope rating instr uctions should be adhered to.
5 Thank you f or purchasing this product. (These instructions are for: TK-C210FWE, TK-C215V4U/E, TK-C215V12U/E.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained.
6 Intr oduction (continued) Intr oduction Safety P recautions .......................................... 2 Characteristics ................................................ 5 Contents ............................ .............................. 6 Operating Precautions .
7 䢇 T o save energ y , when it is not being used tur n the system’ s power off. 䢇 T his camera has been designed f or indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the follo wing places. ● In a place exposed to rain or moisture.
8 Intr oduction (continued) Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the electrical box. ( A pg. 22) NO TE: When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hol e (round ) x 4 Use these when mounting the camera to the ceiling or wall.
9 Camera (Interior) The picture below shows the camer a when the dome cover and outer case are remov ed. Procedures for remo val. ( A pg. 18 A Embedding the camera to the ceiling B , Step 3. to Step 4. ) J Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera.
10 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [RESET/SPO T] RESET/SPO T button When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue.
11 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : This is set for internal synchronization LL (Line Lock): The camera’ s vertical synchronization is lock ed to the AC 24 V pow er line frequency .
12 Intr oduction (continued) Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver . A [IRIS LEVEL] Iris level adjustment For adjusting the le vel of the automatic aper ture control lens.
13 2. [SELECT] WHT .BAL./PHASE setting switch. WHT .B AL.: The F [R/B, +/ - ] b uttons are used as [R/B] adjustment buttons . PHASE: The F [R/B, +/ - ] b uttons are used as [+/ - ] adjustment buttons . (Default setting: WHT .BAL.) 3. [SYNC] Synchr onization system selection swit ch.
14 Installati on and connection Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped scre wdriver .
15 DC 12 V or A C 24 V power supply cable Connect the DC 12 V or the AC 24 V power supply to the DC 12 V/AC 24 V terminals on the terminal board. T o pre vent connection errors or a cable disconnection, we recommend the use of lug plates for the connections.
16 Installation and conn ection (continue d) NO TE: ● T ur n OFF the power supply to all equipment to be used before making connections . ● Read the Instr uction Manual for each piece of equipment to be used before making connections. CA UTION: P ower consumption of TK-C210FW/TK-C215V4/ TK-C215V12 are different from one another .
17 Getting Started CA UTION: ● When mounting the camera to the ceiling, ensure to wear saf ety glasses to protect the eye from any f alling object. ● Attachment of a embedded cover in the ceiling (recess brack et) may be mandatory in cer tain regions.
18 Installation and conn ection (continue d) Embedding the camer a to the ceilin g * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm) 2. Draw the fall pre vention wire mounted to the ceiling slab and the cable ou t from the ceiling in adv ance .
19 䡵 Connecting 1. Attach the f all prevention wire to the camera, followed b y attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cab le . ( A pg. 14) Lower the co ver and connect the connectors . Upon connecting, cover the connectors using the protection cover .
20 Installation and conn ection (continue d) When mounting the camera directly to the ceiling or on th e wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm) Make us e of the template sup plied to open a ho le.
21 4. Connect the video signal cab le . ( A pg. 14) Lower the protection co ver and connect the connectors. Upon connecting, restore the protection cov er to cover the connectors . 5. Connect the input po wer supply cab le . ( A pg. 15) 6. Install the Ferrite core (TK-C210FW onl y) ( A pg.
22 Installation and conn ection (continue d) When mounting t h e camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please consult your nearby JVC authorized dealer for details on the ty pe of electrical box f or which mounting is possible.
23 Adjusting Im age Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and fo cus. * The power to the camera body must be ON when adjustments are performed.
24 Adjusting Ima ge (continued) Adjusting the field angle/focus/ brightness (Not av ailable on TK-C210FW) Upon deter mining the imaging direction, adjust the field angle, f ocus and iris lev el accordingly . The method of adjustment varies with the camera in use.
25 䡵 TK-C215V12 ● 2 types of angle of view ma y be selected for TK-C215V12. In general, set in a wa y such that the home position shoots a wide range and the alar m position a narrow range. ● Use the alar m input mode selection switch to set the actions when there is an alar m input.
26 Adjusting Ima ge (continued) Registe ring alarm position For registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned o n. Registration of alarm position is enabled.
27 As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait for at least 30 minutes.
28 Other s 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on P AL standard Scanning frequencies U type : 15.734 kH z (Horizontal), 59.
29 䡵 General P ower supply : AC 24 V H 50 Hz/60 Hz DC 12 V d P ower consumption TK-C210FW: E type : 220 mA TK-C215V4: U type : 4.2 W E type : 340 mA TK-C215V12: U type : 6.6 W E type : 550 mA Ambient temperature : - 10 f to 50 f (14 g to 122 g ) (Operation) :0 f to 40 f (32 g to 104 g ) (Recommended) Mass TK-C210FW : Appro x.
30 Others (continued) 䡵 External Dimensions [Unit: mm (inches)] When cover is attached When embedded * Specifications and appea rance of this unit and related products are subject to change for product improv ement without pr ior notice. 20 (13/16) 83.
31 Focus chart TK-S215_EN.book Pag e 31 Tuesday, March 28, 2006 9:39 AM.
© 2006 Victor Company of Japan, Limited LST0308-001C TK-C210FW/TK-C215V4/ TK-C215V12 DOME CAMERA TK-S215_EN.book Pag e 32 Tuesday, March 28, 2006 9:39 AM.
An important point after buying a device JVC TK-C215V4E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TK-C215V4E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TK-C215V4E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TK-C215V4E you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TK-C215V4E will certainly help you make a decision on the purchase.
If you already are a holder of JVC TK-C215V4E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TK-C215V4E.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TK-C215V4E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TK-C215V4E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
