Instruction/ maintenance manual of the product TK-C210FW JVC
Go to page of 16
DOME CAMERA TK-C210FW TK-C215V4 TK-C215V12 INSTR UCTIONS For Customer Use: Enter below the Serial No . which is located on the body . Retain this info rmation for future reference .
2 Intr oduction Information f or Users on Disposal of Old Equipment [European Union] This symbol indicates that the electr ical and electronic equipment should not be disposed as general household waste at its end-of-life.
4 Introduction (contin ued) These are general IMPORT ANT SAFEGU ARDS and certain items may not apply to all appliances. 1. Read all of these instructions. 2. Sav e these instructions for later use. 3. All warnings on the product and in the operating instr uctions should be adhered to.
6 Introduction (contin ued) Intr oduction Safety Precautions .......................................... 2 Characteristics ................................................ 5 Contents .......................................................... 6 Operating Precautions .
8 Introduction (contin ued) Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the NO TE: electrical box. ( A pg. 22) When installing the camera onto the electric box, install it using the supplied adaptor ring. B Mounting hole (round) x 4 Use these when mounting the camera to the ceiling or wall.
10 Introduction (contin ued) Set the video setting switches on the camera unit before mounting it. To set the switches, use a fine-tipped scre wdriver . A [RESET/SPO T] RESET/SPOT b utton When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue.
12 Introduction (contin ued) Set the video setting switches on the camera unit before mounting it. To set the s witches, use a fine-tipped screwdriver . A [IRIS LEVEL] Iris level adjustment Fo r adjusting the level of the automatic aper ture control lens.
14 Installation and connect ion Set the video setting switches on the camera unit before mounting it. To set the switches, use a fine-tipped scre wdriver .
16 Installation and connect ion (continued) NO TE: ● Tu rn OFF the pow er supply to all equipment to be used before making connections . ● Read the Instruction Manual for each piece of equipment to be used before making connections. CA UTION: Pow er consumption of TK-C210FW/TK-C215V4/ TK-C215V12 are different from one another .
18 Installation and connect ion (continued) Embedding the camera to the ceiling *M ake use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm) 2. Draw the fall pre vention wire mounted to the ceiling slab an d the cable ou t from the ceiling in advance.
20 Installation and connect ion (continued) When mounting the camera directly to the ceiling or on the wall When mounting to a wall, replace areas indicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm) Make us e of the template sup plied to open a hole .
22 Installation and connect ion (continued) When mounting the camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please consult your nearby JVC authorized dealer for details on the type of electrical box f or which mounting is possible.
24 Adjusting Image (c ontinued) Adjusting the field angle/focus/ brightness (Not av ailable on TK-C210FW) Upon determining the imaging direction, adjust the field angle, f ocus and iris level accordingly . The method of adjustment varies with the camera in use.
26 Adjusting Image (c ontinued) Registering alarm position F or registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned on. Registration of alarm position is enabled.
28 Others 䡵 Camera Signal system: U type : Based on NTSC standard E type : Based on P AL standard Scanning frequencies U type : 15.734 kHz (Hor izontal), 59.
30 Others (continued) 䡵 External Dimensions [Unit: mm (inches)] When cover is attached When embedded *S p ecifications and appearance of this unit and related products are subject to change for product improvement without prior notice. 20 (13/16) 83.
An important point after buying a device JVC TK-C210FW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TK-C210FW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TK-C210FW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TK-C210FW you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TK-C210FW will certainly help you make a decision on the purchase.
If you already are a holder of JVC TK-C210FW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TK-C210FW.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TK-C210FW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TK-C210FW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
