Instruction/ maintenance manual of the product TD-EX90 JVC
Go to page of 24
CASSETTE DECK For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 TD-EX90 W elcome ! We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer .
4 TD-EX90 T able of Contents Welcome ! .......................................................... 3 Important cautions .............................................. 3 For safe use, observe the following ................... 3 Parts Index .............
5 TD-EX90 1 POWER switch Press to switch the power between ON and ST ANDBY . ST ANDBY indicator The indicator is off while the power is ON and lights up when the power is in ST ANDBY mode. 2 Indicator panel 3 DOLBY NR button Press to activate Dolby Noise Reduction.
6 TD-EX90 Display 1 Dolby Noise Reduction indicators B: Lights when Dolby NR type B is selected. C: Lights when Dolby NR type C is selected. 2 Reverse mode indicators On: • During playback, both sides of the tape are played repeatedly .
7 TD-EX90 1 ANALOG input/output jacks Connect to the T APE input/output jacks of the amplifier/tuner using the provided audio pin cords. Connect the IN (REC) jacks to the OUT (REC) jacks of the amplifier/tuner and the OUT (PLA Y) jacks to its IN (PLA Y) jacks.
8 TD-EX90 Setting Up the System Supplied Accesories AC power cord x 1 Audio pin cords x 2 Compu Link cable x 1 Caution for Placement Do not place in any of the following ares. • In direct sunlight. • Do not place the CD player on top of the amplifer/tuner .
9 TD-EX90 Connections Compu Link cable Connect to the COMPU LINK-3 (SYNCHRO) jack of another component equipped with Compu Link remote control system. Audio pin cords Always connect the jacks with the plugs of the same colors so as not to mistake the L (Left) and R (Right) connections.
10 TD-EX90 T ape playback Three tape types including normal (T ype I), High position (T ype II) and Metal (T ype IV) tapes can be played back. The type of tape is identified automatically by the cassette deck. 1 Press 0 . The tape tray comes out open.
11 TD-EX90 T o fast forward or rewind tape: Press 1 or ¡ while tape is in stop mode. The tape indicator blinks at a high speed during fast forward or rewind operation. Fast forward If the current tape transport direction is £ , press ¡ . If the current tape transport direction is ™ , press 1 .
12 TD-EX90 Recording T ape recording (Basic operation) Three tape types including normal (T ype I), High position (T ype II) and Metal (T ype IV) tapes can be recorded onto. The type of tape is identified automatically by the cassette deck. 1 Load the tape for use in recording, with the side A facing up.
13 TD-EX90 T o let recording pause temporarily: Press REC P AUSE. The tape indicator stops blinking and lights steadily . Press ¤ or ‹ to resume recording. T o record continuously on both sides of tape: 1 Load a tape so that you can start recording from the £ direction.
14 TD-EX90 CD synchronized recording CDs can be recorded with a simple, one-touch operation. By using the features of the CD player you can easily create an original tape of your favorite music. Be sure to make the Compu Link connection among the EX series components.
15 TD-EX90 MD synchronized recording Synchronized recording makes it possible to start cassette recording in synchronism with the playback of the MD recorder . Be sure to make the Compu Link connection among the EX series components. 1 Load the tape for use in recording.
16 TD-EX90 COMPU LINK Linked Operation of the Other Optional components (Compu Link) The EX series components can be controlled under linked operation provided by the JVC’ s Compu Link remote control system.
17 TD-EX90 Compu Link-3 features The Compu Link-3 system of the EX series components makes the following operations possible. Shortcut playback Simply selecting an input source of the amplifier/tuner starts playback of the selected source component (CD player , MD recorder or cassette deck).
18 TD-EX90 T ypes of cassette tape This cassette deck incorporates an auto tape select function. The auto tape select function uses the tape-type detection holes to distinguishes which type of tape was inserted, and sets the bias and equalizer to the optimum settings for that tape automatically .
19 TD-EX90 Handling cassette tapes Cautions regarding handling Do not touch the surface of the tape or pull the tape out of the cassette. T ape spooled loosely around the hubs is likely to jam in the pinch rollers and capstans. Before loading the tape into the cassette holder , take up the slack in the tape as shown below .
20 TD-EX90 ACTION • Use a different cassette tape. • If you don’t mind erasing the previously recorded material, cover the holes with tape. • Press ¤ or ‹ to release the pause. • Check to make sure the all equipment is connected correctly .
21 TD-EX90 Specifications Audio performance Input/Output T erminals General Accessories Frequency response (–20 dB recording) Signal-to-noise ratio W ow and flutter AN ALOG IN (REC) AN ALOG OUT (PLA.
22 TD-EX90 Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
23 TD-EX90 LIMITED W ARRANTY A UDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
VICTOR COMP ANY OF JAP AN , LIMITED J V C 0598TTMWSTOZK EN. 1-23.TD-EX90[J]/1 5/12 98.6.4, 11:59 AM 24.
An important point after buying a device JVC TD-EX90 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC TD-EX90 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC TD-EX90 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC TD-EX90 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC TD-EX90 will certainly help you make a decision on the purchase.
If you already are a holder of JVC TD-EX90, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC TD-EX90.
However, one of the most important roles played by the user manual is to help in solving problems with JVC TD-EX90. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC TD-EX90 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
