Instruction/ maintenance manual of the product RM-C13G JVC
Go to page of 64
Important Note: In the spaces below , enter the model and serial number of your tele vision (located at the rear of the tele vision cabinet). Staple your sales receipt or in voice to the inside cov er of this guide. K eep this user’ s guide in a conv enient place for future ref erence.
Impor tant Safety Precautions W ARNING: T O PREVENT FIRE OR SHOCK HAZARDS, DO NO T EXPOSE THIS TV SET T O RAIN OR MOISTURE. CA UTION: T O INSURE PERSONAL SAFETY , OBSER VE THE FOLLOWING R ULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit.
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dr y cloth. 7) Do not block an y ventilation openings. Install in accordance with the manufacturer's instructions.
13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam.
W arnings (Contin ued...) Y our fingers may become tr apped under the TV , causing injuries. Hold the TV at the bottom in the middle, and do not allow the TV to tilt up or down. P O W E R The TV may f all causing injur ies. Hold the bottom of the stand with your hand and tilt the TV up or down.
W arnings (Contin ued...) NOTE: Only JVC’s 26” LCD TV Receiver model is compatible with JVC’ s adapter TS-C180B4. Use only with Premier Mounts Co.
T able of Contents Unpacking y our TV . . . . . . . . . . . . 8 TV Model . . . . . . . . . . . . . . . . 9 TV Remote Control . . . . . . . . . . . 10 Getting Star ted . . . . . . . . . . . . . 11 Using the Stand . . . . . . . . . . 11 The Remote Control .
T wo AA Batteries 1 T elevision 1 Remote Control Used to connect an external antenna or cable TV system to your TV . Used to make video connections with S-Video VCRs, Camcorders and D VD play ers.
D I G ITAL I N RL AUD I O VIDEO I N P U T-1 /C O M P ONE N T VI DEO V IDE O I NP UT 1 A UD IO S -V IDEO O V E R V I DE O V IDEO I NP U T 2 L R A U DIO S -V IDE O O VE R V IDE O V I DE O MO NITOR O UT .
INPUT 1 INDEX ASPECT FREEZE SWAP SELECT RETURN+ INPUT 2 INPUT 3 DIGITAL-IN THEATER PRO NATURAL CINEMA VIDEO STATUS SLEEP TIMER DISPLAY SOUND LIGHT TV CATV VCR DVD MUTING MENU BACK C.
These quick setup pages will pro vide you, in three easy steps, with the basic inf ormation you need to begin using your ne w television right aw ay . If you ha ve questions, or f or more detailed information on any of these steps, please consult other sections of this manual.
Before y ou can operate your remote control, you first need to install the batteries (included). Slide the cov er on the back of the remote down tow ards the bottom of the remote control. Inser t two batter ies (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first.
Quic k Setup Connections Connections Please follo w the flow chart below to deter mine which connection setup is right for you. Then, refer to the appropriate diagr ams to connect your tele vision to other devices that y ou may ha ve.
Quic k Setup Connections 14 Notes: • If your VCR is a mono sound unit, it will ha ve only one audio out jac k. Connect it to the LEFT A UDIO INPUT on the rear of the TV . • Use the S-Video connection if possible f or superior picture quality . • Y our VCR must be tur ned on to view premium cable channels .
Quic k Setup Connections Notes: • Green, blue and red are the most common colors f or D VD cables. Some models may v ary colors. Please consult the user’ s manual for y our D VD pla yer f or more information. • Be careful not to confuse the red D VD cab le with the red audio cable.
Quic k Setup Connections 1) Connect a yello w composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the back of the TV , OR connect an S-Video cable from the camcorder to the back of the TV . 2) Connect a white cable from the camcorder LEFT A UDIO OUT , into the LEFT A UDIO IN on the back of the TV .
17 Quic k Setup Connections TV Rear Panel Speaker Speaker Amplifier V IDE O I NP U T 1 A UDIO S -V IDE O OV ER V IDE O V IDE O I NP UT 2 L R A UDI O S -V IDE O OV ER V IDE O V IDE O M O N I T O R O UT.
Quic k Setup Connections 18 DIGIT A L I N R L A U DIO V IDE O DTV Decoder After the connections have been made, tighten the screw to secure the cables.
19 Quic k Setup Connections By connecting your A V Receiver to y our television's V1 Smar t Input, you can watch picture sources from many diff erent devices , without having to change or use the other input connections on your TV . This allows you to free up the other input connections so y ou can connect more devices to y our television.
When you turn your tele vision on for the first time the inter active plug-in menu will appear . The plug-in menu helps you to get y our TV ready to use by letting y ou set your pref erences for: • The language in which you w ant the onscreen menus to appear .
T o set your clock manually (without using the XDS signal), choose MANU AL. If you choose A UT O, see auto cloc k set abov e. √ ® T o choose MANU AL † T o TIME √ ® T o set the hour † T o minute √ ® T o set the minute † T o Star t Cloc k Manual Cloc k Set Note: • Y ou will hav e to reset the clock after a po wer interruption.
Quic k Setup Plug-In Menu 22 In auto tuner setup , the TV automatically scans through all a vailable channels , memorizing the active ones and skipping o ver b lank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receiv e only clear , active channels.
Y ou can program y our remote to operate your cab le box, satellite receiv er , VCR or D VD play er by using the instructions and codes listed below . If the equipment does not respond to any of the codes listed below or to the code search function, use the remote control supplied by the manuf acturer.
The remote control is programmed with VCR codes for pow er on/off, pla y , stop , fast-f orward, rewind, pause , record, channel up/down operation. 1) Find the VCR brand from the list of codes shown belo w . 2) Slide the first 2-wa y selector switch to “TV” and the other 2-wa y selector switch to “VCR”.
The remote control is programmed with D VD codes f or power on/off , play , stop, f ast-forw ard, rewind, pre vious/next chapter , tra y open/close, and still/pause operation. 1) Find the D VD pla yer brand from the list of codes sho wn below . 2) Slide the first 2-wa y selector switch to “TV” and the other 2-wa y selector switch to “D VD”.
Remote Pr ogramming 26 Cable/Satellite Sear ch Codes Function 1) Slide the first 2-W ay Mode Selector s witch to CA TV . 2) Press and hold down the P OWE R button, then press the R ETURN +/TV button for more than three seconds. 3) Release the R ETURN +/TV button, then release the P OWER button.
T o bring up the onscreen menu , press the M ENU b utton on the remote control. The item that appears in green is the one currently selected. If you use the Menu b utton on the TV’ s front panel instead of the remote, an additional menu screen sho wing INPUT and ASPECT will appear between INITIAL SETUP and PICTURE ADJUST .
Y our television comes with JVC’ s onscreen menu system. The onscreen men us let you make adjustments to your tele vision’ s operation simply and quickly . Examples of the onscreen menus are shown on the ne xt page. Detailed explanations on using each menu f ollow later in this guide.
Press the M ENU button Onscreen Menus Notes: • The DIGIT AL-IN menu can only be display ed when a 480p picture signal is input to the digital-in terminal and the picture is being display ed on the screen.
Initial Setup 30 A uto T uner Setup The auto tuner setup function is described on page 22 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps belo w .
When a viewer attempts to w atch a guarded channel, the follo wing message appears: T o watch a channel that you ha ve lock ed, enter the Lock Code using the 10 ke y pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen.
Y ou can bloc k programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o UNRA TED √ ®.
U.S. P ARENT AL RA TING SYSTEMS Programs with the f ollowing ratings are appropriate f or children. ❏ TV Y is Appr opriate for All Children Programs are created f or very young vie wers and should be suitable f or all ages, including children ages 2 - 6.
Initial Setup 34 Line up the cursor in the column (TV PG, TV G, etc.) with the content ro w (V/FV , S, etc.) and press the π † or √ ® to mov e the cursor to the correct location. Press O K to turn the locking feature on or off . An item is locked if the icon appears instead of a “—”.
Initial Setup ❏ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countr ies which do not use the MP AA ratings system. Other NR films ma y be from amateur producers who didn’t intend to hav e their film widely released.
Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (f or English) √ ® T o enter rating.
Channel guard and V -Chip settings are protected by a f our-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any f our-digit number you wish.
Initial Setup The language function is described on page 20 as the interactive plug-in menu. If you need to choose the language again, follo w the steps below . Press the Menu button π † T o LANGUA GE √ ® T o choose a language: ENG. (English), FRAN.
XDS ID Display provides a channel’ s call letters, the network’ s name, and e ven a program name. The XDS ID inf ormation is provided by the broadcaster .
This feature is used if y ou hav e connected an A V Receiver to your tele vision. By turning this feature on, y our television can automatically detect the signal source from y our components that are connected to your A V Receiver .
Initial Setup 41 This function allows y ou to set whether the signal, which comes from VIDEO-1 input ter minal, should be output from MONIT OR OUT ter minal.
Press the M ENU button π † T o TINT , COLOR, PICTURE, BRIGHT , DET AIL or ENERGY SA VER MODE √ ® T o enter √ ® T o adjust the setting π † T o mov e to the next setting Press the M ENU button when finished These settings allow y ou to change and adjust the way the picture appears on y our television.
Picture Adjust 43 With digital noise clear , this helps take our static or noise from a channel that ma y not be coming in clearly . Press the M ENU button π † T o DIG.
MTS technology allo ws sev eral audio signals to be broadcast at once, giving y ou a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast ma y also include a second audio program (SAP) .
Cloc k/Timer s 45 Set Clock The set clock function is described on page 21 as the interactiv e plug-in menu. Y ou can choose to set the clock automatically , or manually .
The on/off timer lets you progr am your tele vision to tur n itself on or off. Y ou can use it as an alarm to wake up , to help you remember important programs, or as a deco y when you’ re not home.
Y our television has tw o kinds of screen: SPLIT (2 channels), and INDEX (12 channels). T wo channels (or input) will now appear onscreen. The channel (or input) you were w atching before pressing S PLIT will appear on the left, the new channel will appear on the right.
Cable Bo x Note: The 2–T uner Multi Screen function may not operate when used with certain cable box es. This is because while some models of cable bo xes ma y receive up to 181 channels, and ma y only send the signal from one channel to your tele vision.
Button Functions 49 T ur ns the TV on or off. Press the P OWER button Use the number buttons on the remote control to mo ve directly to a specific channel. For example , to mov e to channel 7: 0 (Zero) 7 (Seven) P ower Number Buttons - 10Ke y Pad Use the 100+ button to directly access channels abo ve channel 99.
The return+/TV button has three functions: Return - Returns to the channel viewed just bef ore the channel currently onscreen. Return+ - Lets you progr am a specific channel to retur n to while scanning through the channels using the CH+ and CH– buttons .
The V ideo status button gives y ou a choice of four TV picture display settings, including a display of y our own pref erences. Standard - Resets the picture displa y to the factory settings. Dynamic - Gives a vivid picture with better contr ast when viewing in a brightly lit room.
Button Functions 52 The Sleep Timer can turn the TV off f or you after you f all asleep . Program it to work in intervals of 15 minutes, f or a total time of up to 180 minutes.
This feature will help y ou adjust the picture you are w atching to give you the best possib le picture quality . REGULAR - The regular ratio is used when you w ant to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen.
The M ENU button allo ws you to access JVC’ s onscreen menu system. Press M ENU to activ ate the onscreen menu system. • See individual topics like “Sound Adjust” for specific inf ormation on using menus. Menu C.C. (Closed Caption) Button Functions 54 Back OK Use the C.
Use either the television’ s own tuner or a cable bo x to select channels. Set this switch to TV to operate the tele vision’ s built-in tuner . Move the s witch to CA TV to operate a cable bo x. Note: • See page 23 for inf or mation on programming your remote f or cable box operation.
T roub leshooting 56 There is no power There is no picture or sound You cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines acros.
57 JVC COMP ANY OF AMERICA warrants this product and all par ts thereof, e xcept as set for th below ONL Y T O THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIALS AND W ORKMANSHIP from the date of original retail purchase for the period shown below .
58 W arranty THE DURA TION OF ANY IMPLIED W ARRANTIES, INCLUDING THE IMPLIED W ARRANTY OF MERCHANT ABILITY , IS LIMITED T O THE DURA TION OF THE EXPRESS W ARRANTY HEREIN.
A uthoriz ed Service Centers 59 QU ALITY SER VICE HO W T O LOCA TE Y OUR JVC SER VICE CENTER T OLL FREE: 1 (800) 537-5722 http://www .jvc.com Dear Customer , In order to receive the most satisf action from your purchase, please read the instruction booklet before oper ating the unit.
LCD Flat Television Type Reception Format Reception Range Power Source Power Consumption Model LT-26WX84 NTSC, BTSC System (Multi-Channel Sound) HDTV digital broadcast ready VHF 2 to 13, UHF 14 to 69 .
Notes 61 LT-26WX84 Eng (with stand) 61 12/11/03, 10:01:26 AM.
Notes 62 LT-26WX84 Eng (with stand) 62 12/11/03, 10:01:26 AM.
Notes 63 LT-26WX84 Eng (with stand) 63 12/11/03, 10:01:26 AM.
JVC COMP ANY OF AMERICA Division of JVC Amer icas Cor p. 1700 V alley Road W ayne , New Jerse y , 07470 JVC CANAD A, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LT-26WX84 Eng (with s.
An important point after buying a device JVC RM-C13G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC RM-C13G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC RM-C13G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC RM-C13G you will learn all the available features of the product, as well as information on its operation. The information that you get JVC RM-C13G will certainly help you make a decision on the purchase.
If you already are a holder of JVC RM-C13G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC RM-C13G.
However, one of the most important roles played by the user manual is to help in solving problems with JVC RM-C13G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC RM-C13G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
