Instruction/ maintenance manual of the product NX-PN7 JVC
Go to page of 29
COMPACT COMPONENT SYSTEM NX-PN7 INSTRUCTIONS LVT1864-001 A [J] For customer use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
G-1 Warnings, Cautions and Others Mises en garde, précautions et indications diverses The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the pr.
G-2 Note to CATV system insta ller: This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as p ractical.
G-3 Caution: Proper Ventilation To avoid risk of electric shoc k and fire, and to pre vent damage, locate the apparatus as follows: 1. Front: No obstructions and open spacing. 2. Sides/Top/Back: No obstructions should be placed in the areas s hown by the dimensions below.
1 Contents Introduction ........................ .................... ..... 2 Precautions ............ ............ ......... ............. ............ ...... 2 Getting Started ............... .................... ......... 3 Connections ............
2 Introduction Thank you for purcha sing a JVC product. Please read a ll instructions care fully before opera tion, to ensure yo ur complete unde rstanding and to obtain the best possible performa nce from the unit.
3 Getting Started Supplied Accessories After unpacking, chec k to be sure that you have all the following items. Th e number in parentheses indica tes the quantity of each piece supplied. • Remote control (1) • Lithium coin battery CR2025 (1) (The battery has been installe d when shipped from the factory.
4 Connections Connecting the Antenn as NOTES: • Make sure the FM antenna doe s not touch any other terminals, conne cting cords or the AC power cord. Also, keep the antenna away from me tallic parts of the unit, connect ing cords, and the AC power cord.
5 Connecting the Video Cord to View a Video/Pictur e from iPod When viewing a video/picture from your iPod on your TV, use a comp osite video cord (not supplied) to conne ct the VIDEO OUT jack on the uni t and the compo site video input on your TV.
6 Basic Operations Main Unit Operating on the Main Unit Buttons Functions Turns on or off (standby) the power. Changes the color of the illum ination bars. (P.10) • For DEMO button, see page 5. Activates Sound Turbo. (P.10) Changes the source to FM, AM (P.
7 Display Information • Changes the source to iPod /iPod . (P.13) • Starts playback and pauses for iPod. (P.13) • iPod (P.13): Press: Reverse skip/forward skip Hold down: Reverse sea rch/forward searc h • FM/AM (P.15): Tunes in to a station. Adjusts the volume le vel (VOL MIN/VOL 1 to VOL 29/VOL MAX).
8 Using Headphones Be sure to turn down the volume before conne cting headphones. • Connecting headphones will dea ctivate the speake rs. Remote Control Operating on the Remote Control Basic operations Buttons Main funct ions Turns on or off (standby) the power.
9 To dim the display and the illu mination bars—DIMM ER You can change the brightness of the display and i llumination bars. To set the ECO mode Setting the ECO mode all ows you to reduce power consumpti on by turning off the display while on standby.
10 To change the color of the illumina tion bars You can change the color of th e illumination bars. • The color is memorize d for each source. • When the source is iPod or iPod , you can set the color of each illumin ation bar separately: the bar below the source iPod.
11 Playing Back from iPod You can connect 2 iPod device s to the unit and enjoy sound and video from the iPod. Compatible iPod Types: * Only for still picture. If the iPod does not play correctly, upda te your iPod software to the latest version. • For details about updating your iPod, check on the Apple web site <http://www.
12 Connecting iPod Devices Connect the iPod t o dock A or B on the unit. You can have 2 iPod devices connecte d at the same time. • Make sure the unit is on standby when you connect a n iPod. NOTES: • Be careful not to dama ge the termina l on the dock whe n connecting/di sconnecting the i Pod.
13 Operations For details, refer also to the instruc tion manual for iPod. *1 Not available for iPhone and i Pod touch. *2 Not equipped with iPhone and iPod t ouch. NOTES: • Before viewing a video/pic ture from your iPod on your TV, ma ke the appropriate vide o setting on the iPod.
14 * Not equipped with iPhone and iPod touch. NOTES: • JVC is not responsible for any loss of or damage to iPod that might result from the use of this product. • Do not touch or hit the terminals of the dock and of the iPod. It might cause damage to these terminals.
15 Listening to FM/AM Broadcasts Basic Operations Buttons Function s On the Unit On the remote Selects FM or AM as the source. When an FM programme is broadcast in stereo, ST (stere o) lights up on the display (only when the rece ption is good). Press: Changes the frequency.
16 Presetting Stations You can preset 30 FM st ations and 15 AM st ations. NOTES: • When you unplug the AC powe r cord or if a power fa ilure occurs, the preset sta tions will be erase d in a few days. • If you store a new station ont o an occupied pre set number, the sta tion previously stor ed on that number will be erased.
17 Playing Back from Other Equipment Connecting Other Equipment By using a stereo mini plug cord (not supplied), you can connec t other equipment with ana log audio output jacks, such as a portable audio playe r, etc. • Refer to the instruction manua l supplied with the equipment.
18 Setting the Clock and Timer Setting the Clock Set the built-in clock before using the Timer. • You can set the clock when the unit is turned on or on standby • To exit from the clock set ting, press CLOCK/TIMER as re quired. • To correct a misent ry during the process, press MENU/CANCEL.
19 Setting the Timer Using the Timer, y ou can wake u p with music, etc. • When using an iPod or other equipme nt as the playbac k source, connect it t o the unit beforehand. (P.12, P.17) • You can set the Tim er when the unit is turned on or on standby.
20 • To exit from the timer setti ng, press CLOCK/TIMER as required. • To correct a misent ry during the process, press MENU/CANCEL. You can re turn to the previous step. To cancel the Timer NOTE: The settings you have made are me morized though you cancel the Timer.
21 Troubleshooting If you are having a proble m with your unit, check t his list for a possible solution befor e calling for service. General Power does not come on. The power plug is not inserted securely . Plug it in securely. (P.5) Adjustments or settings are sudd enly cancelled before you finish.
22 Specifications Accessories See page 3. Amplifier Output Power – without iPod 7.5 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more than 10% total harmonic distortion – with an iPod 7.0 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no more than 10% total harmonic distortion – with two iPod devices 6.
warranty_UX-PN7[J].fm Page 1 Thursday , January 10, 2008 9:55 AM.
warranty_UX-PN7[J].fm Page 2 Thursday , January 10, 2008 9:55 AM.
NX-PN7 COMPACT COMPONENT SYSTEM EN © 2008 Victor Company of Japan, Limited 0408YAMMDWBET cover_UX-PN7[J].fm Pa ge 2 Tuesday , April 15, 2008 1:57 PM.
An important point after buying a device JVC NX-PN7 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC NX-PN7 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC NX-PN7 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC NX-PN7 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC NX-PN7 will certainly help you make a decision on the purchase.
If you already are a holder of JVC NX-PN7, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC NX-PN7.
However, one of the most important roles played by the user manual is to help in solving problems with JVC NX-PN7. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC NX-PN7 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
