Instruction/ maintenance manual of the product MX-KC4J JVC
Go to page of 32
For Customer Use: Enter below the Model No . and Serial No . which are located either on the rear , bot- tom or side of the cabinet. Retain this info r mation f or future reference .
G-1 Warnings, Cautions and Others For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea sona- ble protection against harmful i nterference in a residential installation.
G-2 CLASS 1 LASER PRODUCT DANGER 1. Invisible laser rad iation when open and interlock failed or defeated. Avoid direct exposure to beam. CAUTION 1. Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personne l.
1 Introduction Thank you for purchasing the JVC Co mpact Component System. We hope it will be a valued addition to your home, giving you years of enjoy ment. Be sure to read this instruction manual ca refully before operating your new stereo system. In it you will find all the information you need to set up and use the system.
2 Table of Contents Introduction ......................................... .......................................................................... 1 Features ............. .................... ....................... ...................... ........
3 Getting Started Accessories Make sure that you have all o f the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately.
4 Getting Started CAUTION: • Make all connecti ons before plugging the Syste m into an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna Using an FM 75-Ohm Ant enna Cable (not Supplied) If reception is poor, conne ct the outside antenna.
5 Getting Started Connecting the AM Antenna Rear Panel of the Unit • Even when connecting a n outside AM antenn a, keep the indoor AM loop connected. CAUTION: • To avoid noise, ke ep antennas away from the Syste m, the connecting cord and the AC po wer cord.
6 Getting Started Connecting Exte rnal Equipment Connect a signal cord with stereo mini plugs (not supplied) b etween the System’s AUX jack on the front panel and the audio outp ut jack or output terminals of the external portable CD, MD player, STB, etc.
7 Basic Operations ) Turning the Power On and Off Turning the System On 1 Press the STANDBY/ON button. The display com es on and “POW ER ON” is displayed once. The STANDBY indicator goes out. The System comes on ready to co ntinue in the mode it was in when the power was last turned off.
8 Basic Operations Fade-out Muting (FADE MUTING) You can mute the output with one touch operation. To muting the output , press the FADE MUTING button on the Remote Control. The output is faded out. To release muti ng , press the FADE MUTING button once again.
9 Using the Tuner You can listen to FM and AM st ations. Station s can be tuned in manually, automa tica lly, or from preset memory storage. ❏ Before listeni ng to the radio: • Make sure t hat both the FM and AM an tennas are correctly connected. (See pages 4 and 5.
10 Using the Tuner • In AM broadcast, reception s ensitivity will be changed by turning the AM loop antenna. Turn the AM loop antenna for best receptio n. Presetting Stations You can preset up to 30 FM stat ions and up to 15 AM stations. • Preset numbers may have been set to factory test fre- quencies prior to shipme nt.
11 Using the CD Player This unit has been designed to playback the following CDs: • Audio CD • CD-R (CD-Recordable) • CD-RW (CD-ReWritable) • MP3 disc (MP3 files recorded on a CD-R or CD-RW)* When playing a CD-R or CD-RW • User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWri- table) can be played back when they are already “finalized.
12 Using the CD Player About Disc Indicator: The Disc indicator consists of th e following three kinds of indica- tors: One Touch Play The power comes on, and operati ons are done automatically.
13 Using the CD Player Basics of Usin g the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of t he selected CD begins playi ng.
14 Using the CD Player Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a progra m when the CD Player is stopped. ❏ You can program up to 32 tracks in any desired order including the same trac ks.
15 Using the CD Player Random Play The tracks of the s elected CD will play in no s pecial order when you use this mode. 1 In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RNDM” and “1 DISC” indicator.
16 Using the Cassette Deck (Listening to a Tape) The Cassette Deck allows you to play, record, and dub audio tapes. ❏ Listening to typ e I tape is suitable for t his Cassette Deck.
17 Using the Cassette Deck (Recording) Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, ha ve the source ready, make one or two settings, and you’re ready to re cord. For each source, the pro- cedure is a litt le bit different so we explain each separately.
18 Using the Cassette Deck (Recording) Standard Recording This is the basic method for re co rding any source. The System also has special ways for recording CD to tape, and ta pe to tape, which save you time and effort, as well as give you some special effects.
19 Using an External Equipment Listening to the External Equipment You can listen to the external e quipment such as portable CD, MD player, STB, or other auxiliary. ❏ First, make sure that the extern al equipment is properly connect- ed to the Syst em.
20 Using the Timers Three types of timers are available : DAILY Timer Use this timer to set wake up every day to music from any source, instead of an alarm cloc k. REC (Recording) Timer Unattended recording of radi o broadcasts. You can set the starting time a nd ending time.
21 Using the Timers Setting the Daily Timer Once you have set the Daily Timer, the time r will be activated at the same time every day. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect.
22 Using the Timers Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the Sy stem enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the ¢ or 4 button to sele ct the preset station number, then press the SET button.
23 Using the Timers Using the Uni t You can set the time in the same way as for setting the Daily Tim- er. 1 Insert a blank or eras able tape into the Deck B and wind past the tape l eader. 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC” appears on the display.
24 Using the Timers Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music a nd know that your System will turn off by it- self rather than play all night.
25 Care And Maintenance Handle your CDs and tapes carefull y, and they will last a long time. Compact Discs CAUTION: • Do not use a ny solvent (for exampl e, conven- tional record cl eaner, spray thinner, benzine, etc.) to clean a CD. General Notes In general, you will have the best performance by keeping your CDs and the mechanism clean.
26 Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hint s given here, or the System has been phys ically damaged, call a qualified person, such as your dealer, for service.
27 Body.fm Page 27 Friday, Decemb er 3, 2004 10:56 AM.
28 Body.fm Page 28 Friday, Decemb er 3, 2004 10:56 AM.
1204NYMCREBET © 2005 Vicotr Company of J apan, Limited EN Specifications Amplifier Output Power 180 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more than 10% tota l harmonic distortio.
An important point after buying a device JVC MX-KC4J (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC MX-KC4J yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC MX-KC4J - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC MX-KC4J you will learn all the available features of the product, as well as information on its operation. The information that you get JVC MX-KC4J will certainly help you make a decision on the purchase.
If you already are a holder of JVC MX-KC4J, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC MX-KC4J.
However, one of the most important roles played by the user manual is to help in solving problems with JVC MX-KC4J. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC MX-KC4J along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
