Instruction/ maintenance manual of the product MX-KC45 JVC
Go to page of 62
For Customer Use: Enter below the Model No . and Serial No . which are located either on the rear , bot- tom or side of the cabinet. Retain this info r mation f or future reference .
G-1 W arnings, Cautions and Others / Mises en gar de , précautions et indications diver ses (For U .S.A ) CA UTION –– % ST ANDBY/ON button ! Disconnect the mains plug to shut the power off completely (all lamps and in dications go off). When installing the product, ensure that the plug is easil y accessible .
G-2 IMPORT ANT FOR LASER PRODUCTS / IMPORT ANT POUR PRODUITS LASER 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cover . There are no user se rviceable par ts inside the unit; leave all servicing to qualified ser- vice personnel. 3. CA UTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RA DIA TION WHEN OPEN.
1 Introduction Thank you for purchasing the JVC Co mpact Component System. We hope it will be a valued addition to your home, giving you years of enjoy ment. Be sure to read this instruction manual ca refully before operating your new stereo system. In it you will find all the information you need to set up and use the system.
2 Table of Contents Introduction ................................................... ................................................................ 1 Features ............. .................... ....................... ...................... ........
3 Getting Started Accessories Make sure that you have all o f the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately.
4 Getting Started CAUTION: • Make all connecti ons before plugging the System int o an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna Using the Coaxial Type Connector (Not supplied) A 75 Ω antenna with coaxial type connector (IEC or DIN45 325) should be connected to the FM 75 Ω COAXIAL terminal.
5 Getting Started Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenn a, keep the indoor AM loop connected. CAUTION: • To avoid noise, ke ep antennas away from the System , the connecting cord and the AC power cord.
6 Getting Started Connecting Exte rnal Equipment Connect a signal cord with stereo mini plugs (not supplied) b etween the System’s AUX jack on the front panel and the audio outp ut jack or output terminals of the external portable CD, MD player, STB, etc.
7 Basic Operations ) Turning the Power On and Off Turning the System On 1 Press the STANDBY/ON button. The display com es on and “POW ER ON” is displayed once. The STANDBY indicator goes out. The System comes on ready to co ntinue in the mode it was in when the power was last turned off.
8 Basic Operations Adjusting the Volume Turn the VOLUME co ntrol on the Unit clockwise to increase the volume or turn it countercloc kwise to decrease the volume. Press the VOLUME + button on the Remote Control to increase the volume or press the VOLUME – button on the Remote Control to decrease the volume.
9 Using the Tuner You can listen to FM and AM st ations. Station s can be tuned in manually, automati ca lly, or from preset memory storage. ❏ Before listeni ng to the radio: • Make sure t hat both the FM and AM antennas are correctly connected. (See pages 4 and 5.
10 Using the Tuner • In AM broadcast, reception s ensitivity will be cha nged by turning the AM loop antenna. Turn the AM loop antenna for best receptio n. Presetting Stations You can preset up to 30 FM stat ions and up to 15 AM stations. • Preset numbers may have been set to factory test fre- quencies prior to shipme nt.
11 Using the CD Player This unit has been designed to playback the following CDs: • Audio CD • CD-R (CD-Recordable) • CD-RW (CD-ReWritable) • MP3/WMA disc (MP3/WMA f ile s recorded on a CD-R o.
12 Using the CD Player About Disc Indicator: The Disc indicator consists of th e following three kinds of indica- tors: One Touch Play The power comes on, and operati ons are done automatically.
13 Using the CD Player Basics of Usin g the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of t he selected CD begins playi ng.
14 Using the CD Player Resume Play for Audio CD and MP3/WMA Disc You can store the point of the track where you stopped playback. By pressing CD 6 button, you can start playback again from the point where you stopped it. On the Unit ONLY Press the SET/RESUME butt on for 2 seconds until both “RESUME” and “ON” a ppear on the display.
15 Using the CD Player To Exit and Re-enter Program Play The program you have made is stored in memory. So, you can exit Program Play temporar ily or re-enter Program Play unless you de- lete the progra m. To exit the program m ode once , press the 7 button to stop playing.
16 Using the Cassette Deck (Listening to a Tape) The Cassette Deck allows you to play, record, and dub audio tapes. ❏ Listening to typ e I tape is suitable for this Ca ssette Deck.
17 Using the Cassette Deck (Recording) Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, ha ve the source ready, make one or two settings, and you’re ready to re cord. For each source, the pro- cedure is a litt le bit different so we explain each separately.
18 Using the Cassette Deck (Recording) Standard Recording To Record Any Sound Source to Tape Follow these steps to record fro m any sound source onto a tape in Deck B.
19 Using an External Equipment Listening to the External Equipment You can listen to the external e quipment such as portable CD, MD player, STB, or other auxiliary. ❏ First, make sure that the extern al equipment is properly connect- ed to the Syst em.
20 Using the Timers Three types of timers are available : DAILY Timer Use this timer to set wake up every day to music from any source, instead of an alarm cloc k. REC (Recording) Timer Unattended recording of radi o broadcasts. You can set the starting time a nd ending time.
21 Using the Timers Setting the Daily Timer Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activa ted at the same time every day until it is canceled. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect.
22 Using the Timers When selecting TAPE: Insert a cassette tape you wa nt to play into Deck A. When selecting AUX: Prepare the ext ernal equipment so that it wil l turn on at the ON time set by the System. To allow this, the equipment should have the timer function.
23 Using the Timers On the Unit You can set the time in the sa me way as for setting the Daily Tim- er. 1 Insert a blank or eras able tape into the Deck B and wind past the tape l eader. 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC” appears on the display.
24 Using the Timers Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music a nd know that your System will turn off by it- self rather than play all night.
25 Care And Maintenance Handle your CDs and tapes carefull y, and they will last a long time. Compact Discs CAUTION: • Do not use a ny solvent (for example, conven- tional record cleaner, spray thinner, benzin e, etc.) to clean a CD. General Notes In general, you will have the best performance by keeping your CDs and the mechanism clea n.
26 Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hint s given here, or the System has been phys ically damaged, call a qualified person, such as your dealer, for service.
MX-KC45(J)_EN.book Page 27 Wed nesday, Janu ary 11, 2006 3:21 PM.
MX-KC45(J)_EN.book Page 28 Wed nesday, Janu ary 11, 2006 3:21 PM.
0106NYMCREBET © 2006 Victor Company of J apan, Limited EN Specifications Amplifier Output Power 200 W per channel, min. RMS, driven into 6 Ω at 1kHz, with no more than 10% t ota l harmonic distorti.
English Français L VT1521-002A [C] COMP A CT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMP A CT SP-MXKC45 CA-MXKC45 CA-MXKC45 INSTRUCTIONS MANUEL D’INSTRUCTIONS MX-KC45 Consists of CA-MXKC45 and SP-MXKC45 Se compose de CA-MXKC 45 et de SP-MXKC45 MX-KC45(C).
G-1 W arnings, Cautions and Others / Mises en gar de , précautions et indications diver ses (For U .S.A ) CA UTION –– % ST ANDBY/ON button ! Disconnect the mains plug to shut the power off completely (all lamps and in dications go off). When installing the product, ensure that the plug is easil y accessible .
G-2 IMPORT ANT FOR LASER PRODUCTS / IMPORT ANT POUR PRODUITS LASER 1. CLASS 1 LASER PRODUCT 2. CA UTION: Do not open the top cover . There are no user ser viceable par ts inside the unit; leav e all ser vicing to qualified ser- vice personnel. 3. CA UTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RA DIA TION WHEN OPEN.
1 English Introduction Thank you for purchasing the JVC Co mpact Component System. We hope it will be a valued addition to your home, giving you years of enjoy ment. Be sure to read this instruction manual ca refully before operating your new stereo system.
2 English Table of Contents Introduction ................................................... ................................................................ 1 Features ............. .................... ....................... ...................... .
3 English Getting Started Accessories Make sure that you have all o f the following items, which are supplied with the System. AM Loop Antenna (1) FM Wire Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately.
4 Getting Started English CAUTION: • Make all connecti ons before plugging the Syste m into an AC power outlet. Connecting the FM Antenna Using the Supplied Wire Antenna Using the Coaxial Type Connector (Not supplied) A 75 Ω antenna with coaxial type connector (IEC or DIN45 325) should be connected to the FM 75 Ω COAXIAL terminal.
5 Getting Started English Connecting the AM Antenna Rear Panel of the Unit • Even when connecting an outside AM antenn a, keep the indoor AM loop connected. CAUTION: • To avoid noise, ke ep antennas away from the Syste m, the connecting cord and the AC po wer cord.
6 Getting Started English Connecting Exte rnal Equipment Connect a signal cord with stereo mini plugs (not supplied) b etween the System’s AUX jack on the front panel and the audio outp ut jack or output terminals of the external portable CD, MD player, STB, etc.
7 English Basic Operations ) Turning the Power On and Off Turning the System On 1 Press the STANDBY/ON button. The display com es on and “POW ER ON” is displayed once. The STANDBY indicator goes out. The System comes on ready to co ntinue in the mode it was in when the power was last turned off.
8 Basic Operations English Adjusting the Volume Turn the VOLUME co ntrol on the Unit clockwise to increase the volume or turn it countercloc kwise to decrease the volume. Press the VOLUME + button on the Remote Control to increase the volume or press the VOLUME – button on the Remote Control to decrease the volume.
9 English Using the Tuner You can listen to FM and AM st ations. Station s can be tuned in manually, automati ca lly, or from preset memory storage. ❏ Before listeni ng to the radio: • Make sure t hat both the FM and AM antennas are correctly connected.
10 Using the Tuner English • In AM broadcast, reception s ensitivity will be cha nged by turning the AM loop antenna. Turn the AM loop antenna for best receptio n. Presetting Stations You can preset up to 30 FM stat ions and up to 15 AM stations. • Preset numbers may have been set to factory test fre- quencies prior to shipme nt.
11 English Using the CD Player This unit has been designed to playback the following CDs: • Audio CD • CD-R (CD-Recordable) • CD-RW (CD-ReWritable) • MP3/WMA disc (MP3/WMA f ile s recorded on .
12 Using the CD Player English About Disc Indicator: The Disc indicator consists of th e following three kinds of indica- tors: One Touch Play The power comes on, and operati ons are done automatically.
13 Using the CD Player English Basics of Usin g the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press one of the Disc button (CD1-CD3) you want to play. The selected disc number (e.g. “CD DISC 1”) appears on the display. The first track of t he selected CD begins playi ng.
14 Using the CD Player English Resume Play for Audio CD and MP3/WMA Disc You can store the point of the track where you stopped playback. By pressing CD 6 button, you can start playback again from the point where you stopped it. On the Unit ONLY Press the SET/RESUME butt on for 2 seconds until both “RESUME” and “ON” a ppear on the display.
15 Using the CD Player English To Exit and Re-enter Program Play The program you have made is stored in memory. So, you can exit Program Play temporar ily or re-enter Program Play unless you de- lete the progra m. To exit the program m ode once , press the 7 button to stop playing.
16 English Using the Cassette Deck (Listening to a Tape) The Cassette Deck allows you to play, record, and dub audio tapes. ❏ Listening to typ e I tape is suitable for this Ca ssette Deck.
17 English Using the Cassette Deck (Recording) Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, ha ve the source ready, make one or two settings, and you’re ready to re cord. For each source, the pro- cedure is a litt le bit different so we explain each separately.
18 Using the Cassette Deck (Recording) English Standard Recording To Record Any Sound Source to Tape Follow these steps to record fro m any sound source onto a tape in Deck B. 1 Insert a blank or erasable tape into the Deck B and wind past the tape leader.
19 English Using an External Equipment Listening to the External Equipment You can listen to the external e quipment such as portable CD, MD player, STB, or other auxiliary. ❏ First, make sure that the extern al equipment is properly connect- ed to the Syst em.
20 English Using the Timers Three types of timers are available : DAILY Timer Use this timer to set wake up every day to music from any source, instead of an alarm cloc k. REC (Recording) Timer Unattended recording of radi o broadcasts. You can set the starting time a nd ending time.
21 Using the Timers English Setting the Daily Timer Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activa ted at the same time every day until it is canceled. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect.
22 Using the Timers English When selecting TAPE: Insert a cassette tape you wa nt to play into Deck A. When selecting AUX: Prepare the ext ernal equipment so that it wil l turn on at the ON time set by the System. To allow this, the equipment should have the timer function.
23 Using the Timers English On the Unit You can set the time in the sa me way as for setting the Daily Tim- er. 1 Insert a blank or eras able tape into the Deck B and wind past the tape l eader. 2 Press the CLOCK/TIMER button until “ON TIME” immediately after “REC” appears on the display.
24 Using the Timers English Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music a nd know that your System will turn off by it- self rather than play all night.
25 English Care And Maintenance Handle your CDs and tapes carefull y, and they will last a long time. Compact Discs CAUTION: • Do not use a ny solvent (for example, conven- tional record cleaner, spray thinner, benzin e, etc.) to clean a CD. General Notes In general, you will have the best performance by keeping your CDs and the mechanism clea n.
26 English Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.
0206NYMCREBET EN, FR © 2006 Victor Company of Japan, Limited MX-KC45 COMPACT COMPONENT SYSTEM MX-KC45(C).book Page 1 Wedne sd ay, January 11, 2006 2:32 PM.
An important point after buying a device JVC MX-KC45 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC MX-KC45 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC MX-KC45 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC MX-KC45 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC MX-KC45 will certainly help you make a decision on the purchase.
If you already are a holder of JVC MX-KC45, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC MX-KC45.
However, one of the most important roles played by the user manual is to help in solving problems with JVC MX-KC45. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC MX-KC45 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
