Instruction/ maintenance manual of the product LVT2071-005A JVC
Go to page of 24
MICRO COMPONENT SYSTEM UX-G210 —Consists of CA-UXG210 and SP-UXG210 INSTRUCTIONS LVT2071-005A [J] E n g l i s h For Customer Use: Enter belo w the Model No . and Serial No. w hich are located either on the rear , bottom or side of the cabinet. Retain inf or mation for future ref erence .
G-1 Warnings, Cautions and Others Mises en garde, précautions et indications diverses WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. AVERTISSEMENT: POUR PRÉVENIR LES RISQUES D’INCENDIE OU DE CHOCS ÉLECTRIQUES, NE PAS EXPOSER CE APPAREIL À LA PLUIE OU À L’HUMIDITÉ.
G-2 CAUTION To reduce the risk of electr ical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’él ectrocution, d’incendie, etc.: 1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret de l’appareil.
G-3 CAUTION • Do not bl ock the ventilation openings or holes. (If the ventilation openi ngs or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) • Do not place any naked flame sources, such as lighted candles, on the apparatus.
1 Contents Introduction .......... ....................... ...................... 2 Precautions .... ......... ......... ........... ......... ........... ......... ......... .. 2 How to Read T his Manual ... ........... ......... ........... ........
2 Thank you for purchasing a JVC product. Please read all instructions c a refully before operation, to ensure your complete understanding and to ob tain the best possible performance from the unit. Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C (41°F) and 35°C (95°F).
3 Getting Started Step 1 : Unpack After unpacking, check to make sure that you have all the following items. The number in parentheses indicates t he quantity of each piece supplied. • FM antenna (1) • Remote control (1) • Batteries (2) If any items are missing, cons ult your dealer immediately.
4 Step 3 : Hook Up For better FM reception • Make sure the antenna conduc tors do not touch any other terminals, connecting cords and the AC power cord. Also, keep the antenna away from metalli c parts of the System, connecting cords, and the AC power cord.
5 Display Indicators The indications on the display teach you a lot of things while you are operating t he System. Before operating the System, be fa miliar with when and how the indica tors illuminate on the display. 1 TRACK indi cator • Lights when a disc or US B mass storage class device is played.
6 Daily Operations —Playback 1 Turn on the power. The STANDBY lamp on the main unit turns off. 2 Select the source. Playback automaticall y starts if the selecte d source is ready to start. • If you select AUDIO IN, start playback on the external device.
7 Listening to the FM Radio To select FM To tune in to a station While FM is select ed... Station searching starts and the frequency indication starts changing on the display. When a station (frequency) with sufficient signal strength is tuned in, the searching will stop.
8 Playable Media and Files This System can play back fo llowing types of discs/files. • Audio CD • MP3/WMA files on a CD-R, CD-RW, or USB mass storage class device • This System may not play back some files even though their formats ar e listed above.
9 Playing Back Discs/Files To select a track/group To select a track: To select a group (MP3/WMA only): To locate a particula r position While playing a disc, press and hold until the position you want is reached. To locate a track directly and start play • When you play back an MP3/WMA file, you can only select the tracks of the current group.
10 Daily Operations —Sound & Other Adjustments Adjusting the Volume You can adjust the volume level from level 0 (“VOL MIN”) to level 31 (“VOL MAX”). To drop the volume in a moment Adjusting the Sound To reinforce the bass soun d—HBS You can enjoy powerful bass sound with the Hyper-Bass Sound effect.
11 Setting the Clock You can set the clock only when the System is turned off (on standby). 1 Turn off (standby) the System. 2 Activate the clock setting mode. 3 Adjust the hour. 4 Adjust the minute. The built-in clock starts working. To check the current time during play The time is displayed for a few seconds.
12 Advanced Disc/USB Mass Storag e Class Device Operations Programming the Playing Order— Program Play You can arrange the playing orde r of the tracks (up to 32) before you start playback. • You can repeat the progr ammed tracks by pressing REPEAT (see page 14).
13 (2) Select a track. 4 Confirm the selection. Next program step is indicated. 5 Repeat steps 3 and 4 to program other tracks. 6 Start playback. The tracks you have selected are played back in the order you have programmed. • You cannot select the trac k with the number buttons during Program Play.
14 Playing at Random—Rando m Play You can play back all the tracks at random. 1 Select the sour ce. 2 Start Random Play. Playback starts in the random order. Random Play ends when all tracks are played. • You cannot select the trac k with the number buttons during Random Play.
15 Additional Information Learning More about This System Daily Operations—Playback (see pages 6 to 9) Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased.
16 Troubleshooting If you are having a problem wi th your System, check this list for a possible solution before calling for service. General: Adjustments or settin gs are sudden ly canceled before you finish. s There is a time limit. Repeat the procedure again.
17 Specifications Amplifier section Output Power: 5 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. (IEC268-3) Speakers/Imped ance: 4 Ω – 8 Ω Terminals AUDIO IN: Input sensitivity/Impedance: 250 mV/50 k Ω USB MEMORY: USB specification Compatible with USB 2.
18 Parts Index Refer to the pages to see how to use the buttons and controls. Remote control AUDIO IN USB MEMORY 11 6, 7, 9 6, 8, 12, 1 3 , 14 9, 11, 12, 1 3 , 14 7, 9, 12 14 14 10 6, 11 7, 9, 12, 1 3.
UX-G210[J].BOOK Page 19 Friday, N ovember 20, 2009 10 :23 AM.
1209YAMMDWMTS EN © 2009 Victor Company of Japan, Limited UX-G210 MICRO COMPONENT SYSTEM COVER_UX-G210[J].FM Page 2 M onday, December 7, 2009 2:27 PM.
An important point after buying a device JVC LVT2071-005A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LVT2071-005A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LVT2071-005A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LVT2071-005A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LVT2071-005A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LVT2071-005A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LVT2071-005A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LVT2071-005A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LVT2071-005A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
