Instruction/ maintenance manual of the product LVT1356-001B JVC
Go to page of 28
LVT1356-001B [B] INSTR UCTIONS MICR O COMPONENT SYSTEM UX-G1 —Consists of CA-UXG1 and SP-UXG1 TIMER SET RANDOM SLEEP REPEAT/ RDS SEARCH STANDBY/ON TIMER ON/OFF REMAIN/ RDS MODE BEAT CUT DISPLAY/ CLO.
Wa rnings, Cautions and Others IMPORT ANT for the U .K. DO NO T cut off the mains plug from this equipment. If the plug fitted is not suitable f or the pow er points in your home or the cable is too short to reach a power point, then obtain an appro- priate safety appro ved e xtension lead or consult your dealer .
G-2 SAFETY INSTR UCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been designed and manuf actured to meet international safety standards b ut, like any electrical equipment, care must be tak en if you are to obtain the best results and saf ety is to be assured.
1 Power sources •W hen unplugging the unit from the wall outlet, alw ays pull on the plug, not the A C power cord. DO NO T handle the AC po wer cord with wet hands. Moisture condensation Moisture may condense on the lenses inside the unit in the follo wing cases: • After starting to heat the room.
2 Contents Location of the Buttons and Controls ............................. 3 Main unit ................................................................................... 3 Remote Control ............................................................
3 Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Main Unit TIMER ON/OFF PHONES SOUND /BASS BAND OPEN MULTI CONTROL CD CONTROL TAPE TUNER CD 1 2 3 4 5.
4 ON OFF 1ALL MP3 PRGM RAND T OT AL REMAIN MHz kHz SYNC SLEEP ST MONO SOUND BASS 12 3 4 56 7 y r e q pw t 9 8 Display window on the front panel Display window 1 (timer) indicator 2 ON/OFF (timer on-ti.
5 TIMER SET RANDOM SLEEP REPEAT/ RDS SEARCH STANDBY/ON TIMER ON/OFF REMAIN/ RDS MODE BEAT CUT DISPLAY/ CLOCK SET MUTING SOUND/ BASS CD TAPE CD VOLUME TUNER/ BAND FM MODE PROGRAM RM-SUXH10R REMOTE CONTROL 1 2 3 4 5 6 7 8 u y t r e w q p 9 Remote Control See pages in parentheses for details.
6 Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM (MW) loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately .
7 To connect AM (MW) and FM antennas 1 Attach the FM antenna to the FM CO AXIAL 75 Ω terminal. F asten it up in the position which gi ves you the best reception, then fix it on the w all, etc. 2 Connect the supplied AM (MW) loop antenna to the AM LOOP terminal.
8 Basic and Common Operations Setting the Clock Before operating the unit any further , first set the unit’ s clock. When you plug in the power cord, “0:00” starts flashing on the display . Y ou can set the clock when the unit is either turned on or in standby mode.
9 Selecting the Sound Modes Y ou can select one of the 4 sound modes. •T his function also affects the sound fr om headphones. •T his function only af fects the playback sound, and does not af fect your recording. To select the sound modes, press SOUND/B ASS repeatedly .
10 T uning in to a Station 1 Press TUNER/BAND to select either “FM” or “AM. ” The unit automatically turns on and tunes in to the previously recei ved station—either FM or AM (MW). • Each time you press the button, the band alternates between FM and AM (MW).
11 Presetting Stations Y ou can preset 30 FM and 10 AM (MW) stations manually . In some cases, test frequencies hav e been already stored for the tuner since the factory examined the tuner pr eset function before shipment. This is not a malfunction. Y ou can preset the stations you want into memory by follo wing the presetting method.
12 RDS (Radio Data System) allo ws FM stations to send an additional signal along with their regular program signals. F or e xample, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
13 Description of the PTY codes: NEWS: Ne ws. AFF AIRS: T opical program expanding or enlarging upon the news—debate, or analysis. INFO: Program the purpose of which is to impart advice in the widest sense. SPOR T : Program concerned with any aspect of sports.
14 Playing Back Discs This unit has been designed to play back the follo wing discs—CD, CD-R, and CD-R W . When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recordable) and CD-R Ws (CD- ReWritable) can be played only if they are already “f inalized.
15 Programming the T rack Playing Order—Program Play Y ou can arrange the order in which tracks play before you start playing. Y ou can program up to 60 tracks. On the remote contr ol ONL Y : 1 Place a disc. • If the current source is not the CD player , press CD.
16 Playing at Random—Random Play Y ou can play the tracks at random. On the r emote control ONL Y : Press RANDOM bef ore or during playing . The RAND and indicators light up on the display . RANDOM To stop playing, press 7 . To exit from Random Play , press RANDOM again.
17 F or T ape operations, use buttons inside the front cov er on the unit. Playing Back a T ape Y ou can play back type I tapes only . On the unit ONL Y : 1 Open the front co ver . 2 Press & / ) (stop/cassette holder open). The cassette holder opens.
18 IMPOR T ANT : • It should be noted that it may be unlawful to re-r ecord pre-r ecorded tapes, records, or discs without the consent of the owner of copyright in the sound or video r ecording, br oadcast or cable program and in any literary , dramatic, musical, or artistic embodied therein.
19 Recording Discs —Disc Synchronized Recording Y ou can start disc play and recording at the same time. On the unit ONL Y : 1 Put a recordable cassette in with the e xposed part of the tape down. • See also page 17. 2 Close the cassette holder gently .
20 Using the T imers On the r emote control ONL Y : 1 Press TIMER SET . The (timer) and the ON (on-time) indicators flash and the on-time setting appears on the display . If you do not need to change the on-time setting, go to step 3 . 2 Press PR OGRAM to set the on-time y ou want the unit to turn on.
21 9 Press ST ANDBY/ON to turn off the unit if the unit is on. To deactivate the timer temporarily , press TIMER ON/OFF until the (timer) indicator goes of f.
22 Maintenance To get the best performance of the unit, keep your discs, tapes and mechanism clean. General Notes In general, you will hav e the best performance by keeping your discs, tapes and the mechanism clean. • Store discs and tapes in their cases, and keep them in cabinets or on shelves.
23 If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damaged, call a qualified per son, such as your dealer , for service.
24 Amplifier Section—CA-UXG1 Output Power (IEC 268-3): 10 W (5 W + 5 W) at 4 Ω (10% THD) Speakers/Impedance: 4 Ω – 16 Ω T uner FM tuning range: 87.
EN 0105NYMMDWORI © 2005 Victor Company of Japan, Limited UX-G1 MICRO COMPONENT SYSTEM UX-G1[B]_rev_01cover_f.p65 05.1.28, 11:28 AM 2.
An important point after buying a device JVC LVT1356-001B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LVT1356-001B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LVT1356-001B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LVT1356-001B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LVT1356-001B will certainly help you make a decision on the purchase.
If you already are a holder of JVC LVT1356-001B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LVT1356-001B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LVT1356-001B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LVT1356-001B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
