Instruction/ maintenance manual of the product LT-32X576 JVC
Go to page of 68
Important Note: In the spaces below , enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user ’s guide in a convenient place for future reference.
2 Important Safety Precautions W ARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS TV SET TO RAIN OR MOISTURE. CAUTION: TO INSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS UNIT . 1. Operate only from the power source specified on the unit.
3 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
4 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been d.
5 W arnings Displaying fi xed images for extended periods of time can leave a subtle but temporary ghost image on your screen. T o avoid this, mix your viewing pattern.
6 W arnings (Continued...) Y our fingers may become trapped under the TV , causing injuries. Hold the TV at the bottom in the middle, and do not allow the TV to tilt up or down. The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up or down.
7 T able of Contents Unpacking your TV . . . . . . . . . . . . 8 TV Model . . . . . . . . . . . . . . . . 9 TV Remote Control . . . . . . . . . . . 10 Getting Started . . . . . . . . . . . . . 1 1 Using the Stand . . . . . . . . . . 1 1 The Remote Control .
8 T wo AA Batteries 1 T elevision 1 Remote Control Used to connect an external antenna or cable TV system to your TV . Used to make video connections with S-Video VCRs, Camcorders and DVD players.
9 INPUT 3 INPUT 2 INPUT 1 INPUT 1 COMPONENT DIGITAL IN AUDIO AUDIO OUT DIGITAL-IN S-VIDEO VIDEO R - AUDIO - L S-VIDEO VIDEO R - AUDIO - L Y Pr Pb VIDEO R - AUDIO - L R - AUDIO - L R L S -V ID E O V I .
10 POWER DISPLAY SLEEP TIMER LIGHT FREEZE THEATER PRO VIDEO STATUS 1 7 4 TUNE 3 9 6 RETURN+ MUTING MENU OK BACK 2 8 0 5 CH + VOL – VOL + REC OPEN/CLOSE STILL/PAUSE STOP PAUSE PLAY FF REW TV CATV VCR DVD VCR CHANNEL PREV NEXT TV/VCR VCR/ DVD POWER SOUND CH – TV RM-C1257G ASPECT INDEX SWAP SELECT MULTI SCREEN INPUT C.
11 These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away . If you have questions, or for more detailed information on any of these steps, please consult other sections of this manual.
12 Before you can operate your remote control, you first need to install the batteries (included). Lift and pull the latch on the back of the remote control to open. Insert two batteries (included) carefully noting the “+” and “–” markings, placing the “–” end in the unit first.
13 Quick Setup Connections Connections Please follow the flow chart below to determine which connection setup is right for you. Then, refer to the appropriate diagrams to connect your television to other devices that you may have. After you are finished connecting your devices, plug the power cord into the nearest power outlet and turn on the TV .
14 INPUT 2 INPUT 1 S-VIDEO VIDEO R - AUDIO - L S-VIDEO VIDEO R - AUDIO - L DIGITAL-IN 75Ω (UH F/VHF) Coaxial Cable Cable or Antenna Output OR VCR IN OUT Two-Way Splitter IN OUT V L R Cable Box OUT IN IN OUT OUT TV Rear Panel TV Rear Panel Quick Setup Connections Notes: • If your VCR is a mono sound unit, it will have only one audio out jack.
15 Quick Setup Connections Notes: • Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user ’s manual for your DVD player for more information. • Be careful not to confuse the red DVD cable with the red audio cable.
16 Quick Setup Connections 1) Connect a yellow composite cable from the camcorder VIDEO OUT , into the VIDEO IN on the back of the TV , OR connect an S-Video cable from the camcorder to the back of the TV . 2) Connect a white cable from the camcorder LEFT AUDIO OUT , into the LEFT AUDIO IN on the back of the TV .
17 Quick Setup Connections AUDIO OUT R L TV Rear Panel Speake r Speaker Amplifier 1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier . 2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier .
18 Quick Setup Connections By connecting your A V Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV . This allows you to free up the other input connections so you can connect more devices to your television.
19 Quick Setup Connections By connecting a Digital TV Receiver , high definition pictures can be displayed on your TV in their digital form. INPUT 3 INPUT INPUT 1 COMPONENT DIGITAL IN AUDIO AUDIO OUT .
20 Quick Setup Connections By connecting a HDMI compatible device, high definition pictures can be displayed on your TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI compatible device. HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all digital audio/video interface.
21 Quick Setup Plug-In Menu When you turn your television on for the first time the interactive plug-in menu will appear . The plug-in menu helps you to get your TV ready to use by letting you set your preferences for: • The language in which you want the onscreen menus to appear .
22 Quick Setup Plug-In Menu T o set your clock manually (without using the XDS signal), choose MANUAL. If you choose AUTO, see auto clock set above. √ ® T o choose MANUAL † T o TIME √ ® T o se.
23 Quick Setup Plug-In Menu In auto tuner setup, the TV automatically scans through all available channels, memorizing the active ones and skipping over blank ones or channels with weak signals. This means when you scan (using the C HANNEL +/– buttons) you will receive only clear , active channels.
24 Remote Programming ABC Archer Cableview Citizen Curtis Diamond Eagle Eastern GC Brand Gemini General Instrument Hamlin Hitachi Jerrold Macom Magnavox Memorex Movietime Oak Paragon Panasonic Philips.
25 Remote Programming The remote control is programmed with VCR codes for power on/off, play , stop, fast-forward, rewind, pause, record, channel up/down operation. 1) Find the VCR brand from the list of codes shown below . 2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
26 Remote Programming The remote control is programmed with DVD codes for power on/off, play , stop, fast-forward, rewind, previous/next chapter , tray open/close, and still/pause operation. 1) Find the DVD player brand from the list of codes shown below .
27 Remote Programming Cable/Satellite Search Codes Function 1) Slide the first 2-W ay Mode Selector switch to CA TV . 2) Press the P OWER and R ETURN + buttons. Hold for at least three seconds and release. 3) Press the P OWER button on the remote, and see if the cable or satellite box responds.
28 Onscreen Menus T o bring up the onscreen menu , press the M ENU button on the remote control. The item that appears in green is the one currently selected.
29 Onscreen Menus Y our television comes with JVC’s onscreen menu system. The onscreen menus let you make adjustments to your television’s operation simply and quickly . Examples of the onscreen menus are shown on the next page. Detailed explanations on using each menu follow later in this guide.
30 Onscreen Menus Press the M ENU button Notes: • The DIGIT AL-IN menu can only be displayed when a 480p picture signal is input to the digital-in terminal and the picture is being displayed on the screen.
31 Initial Setup Auto T uner Setup The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below .
32 How to set the channel label. Press the M ENU button π † T o CHANNEL SUMMARY √ ® T o operate π † T o the ID column Press the O K button to enter √ ® T o select the character you want π † T o move to the next space .
33 Initial Setup When a viewer attempts to watch a guarded channel, the following message appears: T o watch a channel that you have locked, enter the Lock Code using the 10 key pad. If the wrong code is entered, the message “INV ALID LOCK CODE!” will flash on the screen.
34 Initial Setup Y ou can block programs that are not rated. Press the M ENU button π † T o V -CHIP √ ® T o operate (The lock icon appears) Press Z ERO to access V -Chip setup options π † T o.
35 U.S. P ARENT AL RA TING SYSTEMS Programs with the following ratings are appropriate for children. ❏ TV Y is Appropriate for All Children Programs are created for very young viewers and should be suitable for all ages, including children ages 2 - 6.
36 Initial Setup Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV , S, etc.) and press the π † or √ ® to move the cursor to the correct location. Press O K to turn the locking feature on or off. An item is locked if the icon appears instead of a “—”.
37 Initial Setup ❒ NR – Not Rated This is a film which has no rating. In many cases these films were imported from countries which do not use the MP AA ratings system. Other NR films may be from amateur producers who didn’t intend to have their film widely released.
38 Initial Setup Press the M ENU button π † T o V -CHIP √ ® T o operate (lock icon appears) Press Z ERO to access V -Chip setup options π † T o SET CANADIAN RA TINGS ENG (for English) √ ® .
39 Initial Setup Channel guard and V -Chip settings are protected by a four-digit lock code. Y our TV comes preset with a lock code of “0000”. Y ou may change the code to any four-digit number you wish. T o change the lock code, follow the steps below .
40 This function lets you preview the Dynamic Gamma demo. Press the M ENU button π † T o AUTO DEMO √ ® T o turn AUTO DEMO ON or OFF Note: • To stop auto demo, press the B ACK button.
41 Initial Setup Many broadcasts now include an onscreen display of dialog called closed captions. Some broadcasts may also include displays of additional information in text form. Y our television can access and display this information using the closed caption feature.
42 Initial Setup XDS ID Display provides a channel’s call letters, the network’ s name, and even a program name. The XDS ID information is provided by the broadcaster .
43 Initial Setup This feature is used if you have connected an A V Receiver to your television. By turning this feature on, your television can automatically detect the signal source from your components that are connected to your A V Receiver .
44 Initial Setup Position adjustment allows you to adjust the position of the picture on the screen vertically when the aspect is set to panorama, cinema, or full.
45 Initial Setup The DIGIT AL-IN option can only be displayed in the INITIAL SETUP menu when a HDMI480p picture signal is being input to the DIGIT AL-IN terminal. This option adjusts the position when a HDMI or DVI 480p picture signal is being displayed on the screen.
46 These settings allow you to change and adjust the way the picture appears on your television. TINT T int allows you to adjust the levels of red and green in your TV picture. COLOR The color function lets you make all the colors in the TV picture appear either more vivid or subtle.
47 Picture Adjust Color T emperature Y ou can decide how strong or dull the colors appear on the TV screen. Press the M ENU button π † T o COLOR TEMPERA TURE √ ® T o enter √ ® T o set LOW or HIGH Press the M ENU button when finished SELECT OPERATE EXIT MENU NEXT PAGE PREVIOUS STANDARD PICTURE ADJUST (2/2) COLOR TEMPERATURE DIG.
48 Picture Adjust Color Management This TV supports the COLOR MANAGEMENT function to ensure dull colors are compensated to produce natural hues. Press the M ENU button π † T o COLOR MANAGEMENT √ .
49 Sound Adjust MTS technology allows several audio signals to be broadcast at once, giving you a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broadcast may also include a second audio program (SAP) .
50 Clock/T imers Set Clock The set clock function is described on page 22 as the interactive plug-in menu. Y ou can choose to set the clock automatically , or manually .
51 Clock/T imers The on/off timer lets you program your television to turn itself on or of f. Y ou can use it as an alarm to wake up, to help you remember important programs, or as a decoy when you’re not home.
52 Button Functions Y our television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels). Multi Screen Function Note: After you press any multiscreen button, if you press the menu button, only the picture adjust screen will appear .
53 Button Functions Y ou can exchange the channel (or input) displayed in the split screen window for the main screen image by pressing the S WAP button. Freeze Swap With SELECT , you can select the picture (channel) while viewing SPLIT screen. When you press S ELECT button, the channel number on the top will be highlighted.
54 Button Functions T urns the TV on or off. Press the P OWER button Use the number buttons on the remote control to move directly to a specific channel.
55 Button Functions The R ETURN + button has two functions: Return - Returns to the channel viewed just before the channel currently onscreen. Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.
56 Button Functions The V IDEO S T ATUS button gives you a choice of four TV picture display settings, including a display of your own preferences. Standard - Resets the picture display to the factory settings. Dynamic - Gives a vivid picture with better contrast when viewing in a brightly lit room.
57 Button Functions The display screen shows the current status of timers, inputs, and XDS ID. Press the D ISPLA Y button The screen to the right shows the following information: • The current chann.
58 Button Functions This feature will help you adjust the picture you are watching to give you the best possible picture quality . REGULAR - The regular ratio is used when you want to watch a 4:3 broadcast or recorded program without modifying the original picture to fit the dimensions of your 16:9 screen.
59 Button Functions The M ENU button allows you to access JVC’s onscreen menu system. Press M ENU to activate the onscreen menu system. • See individual topics like “Sound Adjust” for specific information on using menus. Menu Back OK This button allows you to go back in the menu to change a selection or correct a mistake.
60 Use either the television’s own tuner or a cable box to select channels. Set this switch to TV to operate the television’s built-in tuner . Move the switch to CA TV to operate a cable box. Note: • See page 24 for information on programming your remote for cable box operation.
61 No Program If the TV channel you selected, or were watching is not receiving a signal, "NO PROGRAM" appears on the television screen. It appears when that channel is not receiving a signal and you have the Noise Muting function OFF and you have a single screen.
62 T roubleshooting There is no power There is no picture or sound Y ou cannot select a certain channel The power turns off by itself The clock is wrong The color quality is poor There are lines acros.
63 LCT1827-001B-A ENG 63 7/25/05, 9:13:40 AM.
64 LCT1827-001B-A ENG 64 7/25/05, 9:13:40 AM.
65 LCD Flat Television Type Reception Format Reception Range Power Source Power Consumption Model LT-26X576 NTSC, BTSC System (Multi-Channel Sound) HDTV digital broadcast ready VHF 2 to 13, UHF 14 to .
66 Notes LCT1827-001B-A ENG 66 7/25/05, 9:13:41 AM.
67 Notes LCT1827-001B-A ENG 67 7/25/05, 9:13:41 AM.
JVC COMP ANY OF AMERICA Division of JVC Americas Corp. 1700 V alley Road W ayne, New Jersey , 07470 JVC CANADA, INC. 21 Finchdene Square Scarborough, Ontario Canada, M1X 1A7 LCT1827-001B-A ENG 68 7/25.
An important point after buying a device JVC LT-32X576 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LT-32X576 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LT-32X576 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LT-32X576 you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LT-32X576 will certainly help you make a decision on the purchase.
If you already are a holder of JVC LT-32X576, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LT-32X576.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LT-32X576. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LT-32X576 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
