Instruction/ maintenance manual of the product ATP-CNX-020 Aastra
Go to page of 32
ATP-CNX-020 Document Revision 01.06 Aastra CNX Conference Network Switch Release 1.2 July 2005 Aastra CNX Conference Network Switch Inst allation and Setup Guide.
*Aastra, Aastra T elecom, and the Aastra T elecom corporate logo are registered trademarks of Aastra T echnologies, Limited. Microsoft, Microsoft Windows, and In ternet Explorer are trademar ks of Microsoft Corporat ion. NFS, Sun, SunOS, Java, JavaHelp, Solaris, and Sun Microsystems ar e trademar ks of Sun Microsystems, Inc.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 iii Cont ents Contents Warranty, regulator y, safety, and copyright / licens ing notices W arranty - Aastra T elecom, Inc. ............... .... ......... ............. ................ ............. ............. .
.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 v W arranty , regulatory , safety , and copyright / licensing notices W arranty - Aastra T elecom, Inc. Aastra T elecom Inc.
Regulatory information vi ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Regulatory information U.S.A. requirement s The AASTRA CNX has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the Federal Communications Commi ssion (FCC) rules .
Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 vii If you experience trouble with this equipm ent, please contact Aast ra T elecom for repair and warranty information. If there is a problem with the network, the telephone company may request th at you remove the equipment from the network until the problem is reso lved.
Regulatory information viii ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Repairs to certified equipment sh oul d be made by a supplier -designated re presentative.
Regulatory information ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 ix European requirement s EMI/EN 55 022 statement This certifies that t he Aastra CNX Asterisk Net work Switch is shielded agai nst the generation of rad io interference in accordance with the application of C ouncil Directive 89/336/EEC.
Safety warnin gs x ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Safety warnings General warnings The following safety warnings apply: • Mechanical hazards and electrical s hock hazards ar e possible if you remove one or more of the modules.
Software lic ensing and copyright ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xi Software licensing and copyright The Aastra CNX product co nsists of an Aastra designed hardware platform distributed with embe dded Linux operatin g system and applic ation software.
.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 xiii We l c o m e Introduction Congratulations!! Y ou have purchase d a highly functional, cost-effective, easy-to-use Aastra CNX Conference Network Switch for use in your network.
Introduction xiv ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide What is in the Aastra CNX shipping p ackage? The Aastra CNX is carefully and securely p ackaged within the shipping container . Upon opening the shipping p ackage, inventory the contents to be sure there are no missing or damaged parts.
ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 1 Aastra CNX Installation and Setup Procedures Procedures Introduction This section provides quic k installation and setup procedures for installing and starting up the Aastra CNX Conference Network Switch. This se ction also provides a list of additional parts that you need to install the Aastra CNX.
Procedures 2 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Prep aring for the hard ware inst allation W hat y ou need for a single installation One Aastra CNX u.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 3 Aastra CNX Installation and Setup Procedures Inst alling the Aastra CNX in a rack W arning: Bef ore you install the Aastra CNX unit in a r ack, ensure that the r ack is sturdy and w ell secured.
Procedures 4 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Connecting to the console port T o connect a local PC or ter minal: a. Attach the 9-pin male DB-9 connector on the ser ial cable to the f emale console por t on the rear panel of the Aastra CNX.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 5 Aastra CNX Installation and Setup Procedures Connecting the network cables T1/E1 Connect the RJ-48C T1/E1 cable(s) to the RJ-48C T1/E1 por t(s) on the rear panel of the Aastra CNX .
Procedures 6 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Connecting the AC power cable Ground the c hassis a. Locate the 3-hole, f emale, po wer receptacle on the rear of the chassis. b. Plug the male, 3-prong connector on the po wer cab le into the power receptacle .
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 7 Aastra CNX Installation and Setup Procedures S t arting up and checki ng the Aastra CNX A pply po wer to the Aastra CNX T o star t up the Aastra CNX, inser t the CompactFlash card into slot 1 of the unit and apply power from the power source .
Procedures 8 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Configuring the network settings Requirement s The following is requi red be fore you configure the Aastra CNX for the first time: • The Aastra CNX must physically be connected to your conso le using an RS-232/DB-9 cable.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 9 Aastra CNX Installation and Setup Procedures (1) Run network and tim e configuration Use the following procedure to initially config ure the network settings on the Aastra CNX hardware.
Procedures 10 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 6 Enter “ y ” if the network informati on is correct, and press <Enter>. Enter “ n ” if the network information is incorrect, and press <Enter>.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 11 Aastra CNX Installation and Setup Procedures 9 Enter the domain name for the Aastra CNX and press <Enter>.
Procedures 12 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 11 E n t e r “ y ” if the DNS information is correct, and press <Enter>. Enter “ n ” if the DNS informatio n is incorrect, and p ress <Enter>.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 13 Aastra CNX Installation and Setup Procedures 13 Enter “ y ” if the timezone is co rrect, and press <Enter>.
Procedures 14 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide 15 Enter “ y ” if the date and time are co rrect, and press <Enter> . Enter “ n ” if the date and time are incorrect, and press <Enter>.
Procedures ATP-CNX-020 Rel. 1.2, Doc. Rev. 01.06 15 Aastra CNX Installation and Setup Procedures 17 Enter up to four NTP servers in your network, and press <Enter>. For example: NTP Server #1: [pool.ntp.org ]: 192.167.2.11 ↵ NTP Server #2: [pool.
Procedures 16 ATP-CNX-020 Rel. 1. 2, Doc. Rev. 01.06 Aastra CNX Quick Insta llation and Setup Guide Using the Aastra CNX GUI via the W eb Using the Aastra CNX GUI via the W eb 8 T o begin using the Aa.
.
Aastra CNX Conference Network Switch Installation and Setup Guide Printed in the USA A TP-CNX- 020 Aastra CNX Release 1.2, Document Revision 01.06 July 2005.
An important point after buying a device Aastra ATP-CNX-020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aastra ATP-CNX-020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aastra ATP-CNX-020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aastra ATP-CNX-020 you will learn all the available features of the product, as well as information on its operation. The information that you get Aastra ATP-CNX-020 will certainly help you make a decision on the purchase.
If you already are a holder of Aastra ATP-CNX-020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aastra ATP-CNX-020.
However, one of the most important roles played by the user manual is to help in solving problems with Aastra ATP-CNX-020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aastra ATP-CNX-020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
