Instruction/ maintenance manual of the product LT-26B60BU JVC
Go to page of 32
1004TKH-VT -VT ©2005 VICTOR COMP ANY OF JAP AN, LIMITED 50074712 INSTRUCTIONS ENGLISH DEUTSCH FRANÇAIS BREITBILD-LCD-TV BEDIENUNGSANLEITUNG TÉLÉVISEUR À GRAND ÉCRAN LCD MANUEL D'INSTRUCTION.
ENGLISH - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the point s below for your own safety .
ENGLISH - 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions.
ENGLISH - 3 - W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. W ARNING Do not allow children to hang from the TV , place their elbows on the TV or lean against the TV . Doing so may cause the TV to fall over and lead to injuries.
ENGLISH - 4 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; acciden.
ENGLISH - 5 - Remote Control Buttons 3 79 $9 / I = (S tand By) but.
ENGLISH - 6 - Control Panel Buttons and T erminals With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. 32:(5 /$03 ,1)5$5(' 5(&(,9(5 63($.
ENGLISH - 7 - 3&$8',2,1 $17( 11 $ (;7 $ % & ' ( (;7 ) * + , 3&,138 7 (;7 (;7 $8 ',2287 7(50,1$/ < 3E 3U &RPSRQHQW$XGLR.
ENGLISH - 8 - How to remove the stand Loosen the 5 screws that att ach the stand to the TV . Gently pull the stand downwards to remove it..
ENGLISH - 9 - Installing TV on the wall W ARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV .
ENGLISH - 1 0 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set.
ENGLISH - 1 1 - Inserting batteries in the remote control handset Remove the battery cover located on the back of the handset by gently pulling downwards from the indicated part. Insert two AA/R6 dry cell or equivalent type of batteries inside.
ENGLISH - 1 2 - Initial Settings First A.P.S. (Automatic Programming System) When you turn the TV on for the first time, the first APS menu appears . APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area.
ENGLISH - 1 3 - If FEA TURE NOT A V AILABLE is displayed, download was not performed correctly . Before trying to download again, check that: The VCR power is turned on. The VCR is T -V Link compatible. The VCR is connected to the EXT -2.
ENGLISH - 1 4 - 3 Programme Selection (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9.
ENGLISH - 1 5 - Setting Contrast Using or button select Contrast . Press button to increase contrast level. Press button to decrease contrast level. Setting Bright Using or button select Bright .
ENGLISH - 1 6 - Setting Hue During Playback NTSC system, this will ap- pear in A V mode only when NTSC video source is applied. Otherwise, Hue option is invisible in Picture menu in TV mode : Using or button select Hue . Press button to increase hue level.
ENGLISH - 1 7 - Press button to increase volume. Press button to decrease volume. Selecting Sound Mode Using or button select Sound Mode. Press or button to change Sound Mode. Y ou can choose Mono , Stereo or Dual (I-II) mode, only if the selected channel sup- ports that Sound Mode.
ENGLISH - 1 8 - In EXT mode, Install menu appears like this: Y ou can change only Colour system and VCR. Selecting Programme Using or button select Programme . T o select programme number , you can use / button or Digit Buttons.
ENGLISH - 1 9 - Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.
ENGLISH - 2 0 - Source Menu Y ou can switch your TV to EXT modes by pressing directly to AV button or by selecting in source menu from the main menu. While in EXT mode, you can also switch your TV to TV or other EXT modes by selecting in source menu from the main menu.
ENGLISH - 2 1 - Picture Mode Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright. Sleep Timer Sleep Timer mode OSD is displayed when YELLOW button is pressed. The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item.
ENGLISH - 2 2 - Zoom Modes Zoom mode can be changed by pressing the Red button. Y ou can change the screen size according to the picture aspect ratio. Select the optimum one from the following ZOOM modes.
ENGLISH - 2 3 - PC Mode Installation Power off both Computer and Display before making any connections. Set your PCs resolution correctly before con- necting to the T V . See the table in page 29 for supported modes. Use a D-SUB cable to connect the TVs PC input to the computers RGB output termi- nal.
ENGLISH - 2 4 - PC Picture Menu In the Main menu, select PC Picture using or button, then enter the PC Picture menu by pressing / or OK buttons. Contrast, Bright-1 and Colour T emperature adjustments in this menu are identical to ad- justments defined in TV picture menu.
ENGLISH - 2 5 - T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index). On screen display is not available in text mode.
ENGLISH - 2 6 - selected page is found. Press button to display the selected T eletext page. T o exit T eletext Press button. The screen will switch to TV mode. Fastext and T optext Y our TV supports the 7 page T eletext system.
ENGLISH - 2 7 - If you have a device which outputs component signal, connect it to the EXT -3 terminal with a component video cable. Via the ANT (aerial) socket If your equipment does not have an Eurocon- nector or RCA jacks, connect it to the TV with an aerial cable.
ENGLISH - 2 8 - Peripheral Equipment Connections &$0&25'(5 DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections.
ENGLISH - 2 9 - PC Input T ypical Display Modes The display has a maximum resolution of 1360 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
ENGLISH - 3 0 - Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to standby mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position.
ENGLISH - 3 1 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VH F (VH) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
An important point after buying a device JVC LT-26B60BU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LT-26B60BU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LT-26B60BU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LT-26B60BU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LT-26B60BU will certainly help you make a decision on the purchase.
If you already are a holder of JVC LT-26B60BU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LT-26B60BU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LT-26B60BU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LT-26B60BU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
