Instruction/ maintenance manual of the product RE-DM4 AMX
Go to page of 2
Installation Guide RE-DM4 Radia Eclipse 4-Channel Dimme r Module (120 or 240 volts) Overview The RE-DM4 RADIA Eclipse 4-Channel Int egrated Dimmer Module (120 V AC: FG706-01 ; 240 V AC: FG706-02 ) controls up t o six circuits with four 1200- watt onboard dimmers and two satellite connectors for RDM series dimmer or switch modules (FIG .
For full warranty information, refer to the AMX Instruction Manual(s) as sociated with your Product(s). 8/07 ©2007 AMX. All rights reserved. AMX and the AMX logo are registered trademarks of AMX. AMX reserves the right to alter specif ications without n otice at any time.
An important point after buying a device AMX RE-DM4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX RE-DM4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX RE-DM4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX RE-DM4 you will learn all the available features of the product, as well as information on its operation. The information that you get AMX RE-DM4 will certainly help you make a decision on the purchase.
If you already are a holder of AMX RE-DM4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX RE-DM4.
However, one of the most important roles played by the user manual is to help in solving problems with AMX RE-DM4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX RE-DM4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
