Instruction/ maintenance manual of the product RDM-ZC AMX
Go to page of 2
Installation Sheet RDM-ZC Zero Cross Module 2400 W The RDM-ZC Zero Cross Module is a 2400 W zero-cross relay b uilt f or long term, reliable s witching of electronic fluorescent ballasts, electronic trans- f ormer s and incandescent lamps.
AMX Corporation reserves the ri ght to alter specifications without notice at any time. For full warranty i nformation, refer to the AMX Instru ction Manual(s) associated with your Produ ct(s). 043-019-2213 8/01 ©20 01 AMX Corpo ration. All rig hts reserv ed.
An important point after buying a device AMX RDM-ZC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMX RDM-ZC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMX RDM-ZC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMX RDM-ZC you will learn all the available features of the product, as well as information on its operation. The information that you get AMX RDM-ZC will certainly help you make a decision on the purchase.
If you already are a holder of AMX RDM-ZC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMX RDM-ZC.
However, one of the most important roles played by the user manual is to help in solving problems with AMX RDM-ZC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMX RDM-ZC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
