Instruction/ maintenance manual of the product LT-23B60SJ JVC
Go to page of 34
INSTRUCTIONS ENGLISH L T -23B60SJ WIDE LCD P ANEL TV.
ENGLISH - 1 - For your safety This equipment has been designed and manufactured to meet international safety stan- dards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. So, please read the point s below for your own safety .
ENGLISH - 2 - DO DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (in- cluding the mains plug, extension leads and inter-connections between pieces of equip- ment) are properly made and in accordance with the manufacturers instructions.
ENGLISH - 3 - W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. W ARNING Do not allow children to hang from the TV , place their elbows on the TV or lean against the TV . Doing so may cause the TV to fall over and lead to injuries.
ENGLISH - 4 - CAUTION TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING COVER. NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SAFETY PRECAUTION THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE.
ENGLISH - 5 - Import ant Information Please take note EXCLUSION CLAUSE JVC shall under no circumstances be liable for loss and/or damage to the product caused by: fire; earthquake; acciden.
ENGLISH - 6 - Remote Control Buttons / I = (S t and By) button TV / VCR / DVD Switch Number buttons A V button ( TV , EXT -1, EXT -2, EXT -2 S, EXT -3, EXT -3 S or PC ) BLUE / PICTURE Mode button YELL.
ENGLISH - 7 - Control Panel Buttons With certain combinations of connectors and leads the back cover may not be easily fitted. If the cover is left off, this in no way infringes safety requirements. 01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.p65 02.
ENGLISH - 8 - Using the stand This TV comes with a T able T op Stand already att ached. This stand can be used to adjust the direction of the TV screen. Tilt the TV up and down: While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down.
ENGLISH - 9 - Installing TV on the wall W ARNING When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV .
ENGLISH - 1 0 - Preparation Install Display on solid horizontal surface such as a table or desk. For ventilation, leave a space of at least 10 cm free all around the set. T o prevent any fault and unsafe situations, please do not place any objects on top of the set.
ENGLISH - 1 1 - How to connect other devices IMPORT ANT : Switch off the TV before connect- ing any external device. Sockets for external connections are at the back of the T V . For connection of other devices via Euroconnector refer to the manuals of the related devices.
ENGLISH - 1 2 - Initial Settings First A.P.S. (Automatic Programming System) When you turn the TV on for the first time, the first APS menu appears . APS, searches and sorts all channels and stores them automatically on your TV , accord- ing to the transmission of programme sys- tems in your area.
ENGLISH - 1 3 - If FEA TURE NOT A V AILABLE is displayed, download was not performed correctly . Before trying to download again, check that: The VCR power is turned on. The VCR is T -V Link compatible. The VCR is connected to the EXT -2 .
ENGLISH - 1 4 - Programme Selection (Previous or next programme) Press button to select the previous programme. Press button to select the next programme. Programme Selection (direct access): Press digit buttons on the remote control hand- set to select programmes between 0 and 9.
ENGLISH - 1 5 - Setting Contrast Using or button select Contrast . Press button to increase contrast level. Press button to decrease contrast level. Setting Bright-1 Using or button select Bright-1 .
ENGLISH - 1 6 - Setting Hue During Playback NTSC system, this will ap- pear in A V mode only when NTSC video source is applied. Otherwise, Hue option is invisible in Picture menu in TV mode : Using or button select Hue . Press button to increase hue level.
ENGLISH - 1 7 - T o Store The Settings In the Sound Menu, all settings are stored automatically . Feature Menu Press MENU button, now you are in main menu. In the main menu, select Feature us- ing or button. Then enter the Feature menu by pressing / or OK button.
ENGLISH - 1 8 - Selecting Band Band , can be chosen either , C or S by or button. Selecting Channel Channel can be changed by or button or by Digit Buttons. Selecting Colour System Using or button on Colour System , you can change the colour system to P AL, SECAM or Auto .
ENGLISH - 1 9 - T o choose a channel in the Program menu Press / / / buttons . Caution: Using Delete or Insert function rewrite the current chan- nel list in the Program menu. Therefore, the programme num- bers of some of channels will change.
ENGLISH - 2 0 - 6RXU FH 79 79 (; 7 (; 7 (;7 .
ENGLISH - 2 1 - No-Signal Detection (TV mode) If no valid signal detected, it takes 5 minutes to switch to the S tand-By mode unless any signal detected or any Remote Control com- mand is accessed.
ENGLISH - 2 2 - REGULAR: Use to view a normal picture (4:3 aspect ratio) as this is its original shape. P ANORAMIC: This stretches the left and right sides of a nor- mal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.
ENGLISH - 2 3 - Auto Position If you shift the picture horizontally or vertically to an unwanted position, use this item to put the picture into correct place automatically . Select Auto position item by using or buttons. Press OK button.
ENGLISH - 2 4 - Sound in PC mode Connect the PCs Audio output to the TV s PC Audio In socket with an audio cable. T eletext T eletext is an information system that displays text on your TV screen. Using the T eletext in- formation system you can view a page of in- formation on a subject that is available in the list of contents (index).
ENGLISH - 2 5 - buttons. The page will be searched and the page number will be displayed on the upper left corner of the screen when the selected page is found.
ENGLISH - 2 6 - Peripheral Equipment Connections There is a wide range of audio and video equip- ment that can be connected to your TV . Connection diagrams at the end of this sec- tion show you where the different equipment should be connected at the back side of the TV .
ENGLISH - 2 7 - TV and Video Recoder (VCR) Connect the Video Recorder to the AN T (an- tenna input) socket of the TV with the aerial cable. Connect the Video Recorder to the EXT -1 or EXT -2 terminal with the SCART cable, or con- nect it to the EXT -3 terminal with the audio and video cables.
ENGLISH - 2 8 - Peripheral Equipment Connections 3&$8',2,1 $ 17(11$ (;7 $ % & ' ( ) * + , '& ,1 $ '$ 3725 3&,13 87 (;7 (; 7 69,'( 2,1 $ 8',25 / 9,'( 2,1 01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.
ENGLISH - 2 9 - Peripheral Equipment Connections &$0&25'(5 DECODER FOR SA TELLITE RECEIVER VIDEO HEADPHONE AUDIO Antenna Connections 01-ENG-2325W-17MB08P-1861UK-(LT-23B60SJ)_02062005.
ENGLISH - 3 0 - PC Input T ypical Display Modes The display has a maximum resolution of 1366 x 768, vertical sync. frequency range of 50-75 Hz and a horizontal sync. frequency range of 30-69 KHz. The following table is an illustration of some of the typical video display modes.
ENGLISH - 3 1 - Tips Can not turn the TV on? Check that TV/VCR/DVD switch is set to TV position. TV may go to standby mode when you turn the TV on soon after you turn the TV off. If you can turn the TV on again, it is not a problem. Can not turn the TV off? Check that TV/VCR/DVD switch is set to TV position.
ENGLISH - 3 2 - Specifications Broadcasting Systems P AL SECAM BG , DK, I, L, Lp Channels and VHF (VL) 46,25 MHz - 168,25 MHz Frequencies VH F (VH) 175,25 MHz - 463,25 MHz U H F 471,25 MHz - 863,25 MHz Cable TV (S1-S20/ S21-S41) Input Signal Video: Analog 0,7 Vp-p 75 ohm positive Sync: TTL Level positive or negative, Seperate sync.
1004MKH-VT -VT ©2005 VICT OR COMP ANY OF JAP AN, LIMITED.
An important point after buying a device JVC LT-23B60SJ (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LT-23B60SJ yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LT-23B60SJ - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LT-23B60SJ you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LT-23B60SJ will certainly help you make a decision on the purchase.
If you already are a holder of JVC LT-23B60SJ, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LT-23B60SJ.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LT-23B60SJ. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LT-23B60SJ along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
