Instruction/ maintenance manual of the product LPT0684-001A JVC
Go to page of 16
P age 1 April 11, 2002 4:56 pm VIDEO CASSETTE RECORDER HR-J491MS INSTR UCTIONS LPT0684-001A Printed in Malaysia COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD. 0502 MNV f PJ f PJ Safety Precautions T he rating plate and the safety caution are on the rear of the unit.
P age 2 April 11, 2002 4:56 pm 5. DO NOT expose the appar atus to dripping or splashing. 6. DO NOT use this equipment in a bathroom or places with water . Also DO NO T place any containers filled with water or liqui ds ( suc h as c osmetics or medicines, flower vases, potted plants, cups, etc.
P age 3 April 11, 2002 4:56 pm Remote control * Not function with this recorder . On-screen display If you press OK on the remote control when “ O.S .D. ” is set to “ ON ” , you can see the current recorder status on the TV scre en. After about 5 seconds, indications other than the time counter disappear .
P age 4 April 11, 2002 4:56 pm Initial Settings Video Channel Set V ideo channel (RF output channel) is the channel on which your TV receives picture and sound signals f rom the video recorder through the RF cable.
P age 5 April 11, 2002 4:56 pm Language Setting A Access Main Menu screen, then Initial S et screen Press MENU on the remote control. Press rt to place the pointer next to “ INITIAL SET ” , then press OK or e . B Access Language Select screen Press rt to place the pointer next to “ L A N GUA G E ” , then press OK or e .
P age 6 April 11, 2002 4:56 pm Playback Features Adjusting tracking condition — tracking adjustment Automatic trac king adjustment Whenever you insert a tape and start pla yback, automatic trac king starts working and continuously analyzes the signal to enable optimum picture quality during playbac k.
P age 7 April 11, 2002 4:56 pm Recor ding Accidental er asure pre vention T o prevent accidental recording on a recorded cassette, remo ve its record safety tab. T o record on it late r, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
P age 8 April 11, 2002 4:56 pm Timer Reco rding Up to 8 timer recording programs can be made using Express timer programing method as far as a year in ad v ance. Remember , the clock must be set before you can program the timer . NOTES: ● If all the 8programs have already been set, “ PROGRAM FULL ” appears on the TV screen.
P age 9 April 11, 2002 4:56 pm Program overlap warning display If “ PROGRAM OVERLAPPED ” appears, you h ave another program ov erlapping the program you h a ve just made. The Program Check screen appears and conflicting programs will start blinking.
P age 10 April 11, 2002 4:56 pm 䡵 B.E.S.T . — ON / OFF When B.E.S.T . (Biconditional Equalized Signal Tracking) system is set to “ ON ” , this recorder checks the condition of the tape in use during playbac k and recording, and compensates to provide the highest-possible pictures.
P age 11 April 11, 2002 4:56 pm Multi-Brand Remote Control T his remote control can control some functions of remote controllable TVs, cable boxes, satellite receivers or D VD sets listed belo w. Without setting, you can control a JVC T V. NOTES: ● Some unit ’ s brands ha ve more than one code.
P age 12 April 11, 2002 4:56 pm Changing Remote Control Code T his remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. T his remote control is preset to send A code signals because your recorder is initially set to respond to A code signals.
P age 13 April 11, 2002 4:56 pm Inf ormation on Multi-System Compatibility Off-Air Recording T he built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts. Playback T his recorder can play ba ck all 3 types of recorded tape.
P age 14 April 11, 2002 4:56 pm T ape-T o-T ape Editing T here are 4 different types of recorded tape, depending on the signal recorded. T uner Setting IMPORT ANT P erform the following steps only if .
P age 15 April 11, 2002 4:56 pm E Set desired station T he screen to the rig ht appears when a station is detected. If you do n o t want to store the detected station... Press rt to place the pointer next to “ CONTINUE ” , then press OK or e . Channel searc h will resume.
P age 16 April 16, 2002 1:42 pm Specifications *Not provided in certain ar eas. Specifications shown are for SP mode unless specified oth erwise. E. & O.
An important point after buying a device JVC LPT0684-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LPT0684-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LPT0684-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LPT0684-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LPT0684-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LPT0684-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LPT0684-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LPT0684-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LPT0684-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
