Instruction/ maintenance manual of the product LPT0617-001A JVC
Go to page of 92
625 T V P R + T V P R Ð T V Ð T V + 12 3 45 6 78 9 1 2 1 2 3 VHS DV TV CABLE/SAT TV/VCR – –:– – AUDIO 0000 START DEBUT STOP FIN DATE PR DAILY/QTDN.
Filename [D VS3EK_1-EN.fm] Masterpage:Left 2 P age 2 Nove mber 5, 2001 11:58 am SAFETY FIRST Safety Precautions T he rating plate and the safety caution are on the rear of the unit. W ARNING: D ANGEROUS VOL T A GE INSID E W ARNING: T O PREVENT FIRE OR SHOCK HAZARD , DO NOT E XPOSE THIS UNIT T O RAIN OR MOISTU RE.
Masterpage:Right-Full-NoT itle0 3 Filename [D VS3EK_1-EN.fm] P age 3 Nove mber 5, 2001 11:58 am Some Do’ s And Don’ts On The Safe Use Of Equipment T his equipment has been designed and manufa ctur.
Masterpage:Left-index 4 Filename [D VS3EK_1-EN.fm] P age 4 Nove mber 5, 2001 11:58 am INDEX FRONT VIEW DV IN/OUT ENTREE/SORTIE D V VHS DUB COPIE DV DV VHS PR – / + PUSH / TURN 24H EXPRESS 1 32 R.A.EDIT ST ART IN /OUT INSERT A.DUB A ST ANDB Y/ON 1 Butt on 墌 pg.
Masterpage:Right-index 5 Filename [D VS3EK_1-EN.fm] P age 5 Nove mber 5, 2001 11:58 am REAR VIEW S OUT SORTIE ANTENNA ANTENNE IN ENTREE OUT SORTIE AUDIO L R SAT CONTROL CONTROLEUR SAT OUT SORTIE AV2 (L-2) IN/DECODER ENTREE/DECODEUR AV1 (L-1) IN/OUT ENTREE/SORTIE A ANTENNA IN Connector 墌 pg.
Masterpage:Left-index 6 Filename [D VS3EK_1-EN.fm] P age 6 Nove mber 5, 2001 11:58 am INDEX (cont.) FRONT DISPLA Y P ANEL Z pg. 31 A B .E.S.T . Picture System Display (VHS dec k only) 墌 pg. 29 B Symbolic Mo de Indicator s C T ape Sp eed Indicato rs 墌 pg.
Masterpage:Right-index 7 Filename [D VS3EK_1-EN.fm] P age 7 Nove mber 5, 2001 11:58 am ON-SCREEN DISPLA Y (for VHS deck) When “O .S.D .” is set to “O N” ( 墌 pg. 67), various operational indicators appear on the TV screen. A Operation Mode I ndicators B T ape Speed SP/LP/EP * EP is f or NTSC pl a yback only .
Filename [D VS3EK_1-EN.fm] Masterpage:Left 8 P age 8 Nove mber 5, 2001 11:58 am INDEX (cont.) REMOTE CONTROL A LCD P anel 墌 pg. 36 B DV B u t t o n 墌 pg. 30, 31 C TV/C ABLE/SA T Button 墌 pg. 61, 62 D A U DIO Button 墌 pg. 25, 33 ^ (TV Muting) Butto n 墌 pg.
Masterpage:Right-Full-NoT itle0 9 Filename [D VS3EK_1-EN.fm] P age 9 Nove mber 5, 2001 11:58 am How T o Use T he remote control can operate most of your video recorder’ s functions, as well as basic functions of TV sets and satellite rec eiv ers of JVC and other brands.
Masterpage:Left-FullCol 10 Filename [D VS3EK_1-EN.fm] P age 10 November 5, 2001 5:30 pm INST ALLING Y OUR NEW RECORDER Check Contents CHECK ALL THE CONTENTS SHOWN BELOW 4 Y ou are no w ready to install y our video recorder .
Masterpage:Right-NoT itle0 11 Filename [D VS3EK_1-EN.fm] P age 11 Nove mber 5, 2001 11:58 am Basic Connections It’ s essential that y o ur video recorder be properly connected. A Situate the recorder . Place the recorder on a stable, horizontal surface.
Filename [D VS3EK_1-EN.fm] Masterpage:Left 12 P age 12 Nove mber 5, 2001 11:58 am INST ALLING Y OUR NEW RECORDER (cont.) S-VIDEO Connection 8 T o connect to a TV with S-VIDEO/A UDIO IN connectors . . . A Connect the recorder to TV . A Connect the aerial, recorder and TV as per “Basic Connections” ( 墌 pg.
Masterpage:Right 13 Filename [D VS3EK_1a-EN.fm] P age 13 November 5, 2001 1:37 pm INITIAL SETTINGS Auto Set Up Auto Channel Set/Auto Clock Set/ Auto Guide Program Number Set A T urn on the recorder . Press 1 on the recorder or remote control. B Perform Auto Set Up.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 14 P age 14 November 5, 2001 1:37 pm INITIAL SETTINGS (cont.) Preset Download Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set NOTES: ● F or details, refer to the instruction manual of your TV .
Masterpage:Right-Full-NoT itle0 15 Filename [D VS3EK_1a-EN.fm] P age 15 November 5, 2001 1:37 pm Results of Auto Set Up/Preset Download appear on the front display panel If both Au to Channel Set and A uto Clock Set hav e been performed successfully , the correct current time is displa yed.
Masterpage:Left-FullCol 16 Filename [D VS3EK_1a-EN.fm] P age 16 November 5, 2001 1:37 pm T-V LINK T-V Link Functions When you connect the recorder to your TV via a fully-wired 21-pin SC ART cable ( 墌 pg. 11), the following functions are av ailable. Y ou can use these functions only with a TV offeri ng T-V Link, etc.
Masterpage:Right 17 Filename [D VS3EK_1a-EN.fm] P age 17 November 5, 2001 1:37 pm SA T CONTROL SET Satellite Receiver Control Setting T he following procedure is required if you recei ve satellite channels through a satellite recei ver . Approximately 20 seconds before the VIDEO Plus+ timer programming ( 墌 pg.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 18 P age 18 November 5, 2001 1:37 pm SA T CONTROL SET (cont.) Setting satellite receiver's brand and channel After installation, set the satellite receiver’ s brand and channel c orrectly; otherwise, the Satellite Controller cannot work correctly .
Masterpage:Right-NoT itle0 19 Filename [D VS3EK_1a-EN.fm] P age 19 November 5, 2001 1:37 pm F Select the satellite receiver’ s channel for testing. G Check the result of the test. If the satellite recei ver’ s channel number has been changed to the same one as you set in step 6 .
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 20 P age 20 November 5, 2001 1:37 pm PLA YB A CK/RECORDING ON VHS DECK Basic Playback (VHS deck) A Load a cassette. Make sure the windo w side is up, the rear label side is facing you and the arrow on the front of the cassette i s pointed tow ard the recorder .
Masterpage:Right-NoT itle0 21 Filename [D VS3EK_1a-EN.fm] P age 21 November 5, 2001 1:37 pm Basic Recording (VHS deck) A Load a cassette. Insert a VHS (or S-VHS) cassette with the record safety tab intact. ● T he recorder’ s power comes on automatically .
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 22 P age 22 November 5, 2001 1:37 pm PLA YBA CK/RECORDING ON VHS DECK (cont.) Playback Features (VHS deck) NOTE: Refer to the illustrations below as y ou r ead the following procedures. Still Picture/Frame-By-Frame Playback 1 Pause during playback.
Masterpage:Right-NoT itle0 23 Filename [D VS3EK_1a-EN.fm] P age 23 November 5, 2001 1:37 pm High-Speed (T urbo) Search During playbac k , turn the JOG dial quickly to t he left or right. OR During pla yback or still, press 5 for for ward high- speed searc h, or 3 for reverse high-speed sear ch.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 24 P age 24 November 5, 2001 1:37 pm PLA YBA CK/RECORDING ON VHS DECK (cont.) Next Function Memor y T he Next Function Memo ry “tells” the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.
Masterpage:Right 25 Filename [D VS3EK_1a-EN.fm] P age 25 November 5, 2001 1:37 pm Manual T racking Y our recorder is equipped with auto matic tracking control. During playbac k, you can override this and adjust the tracking manually by pressing the PR buttons.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 26 P age 26 November 5, 2001 1:37 pm PLA YBA CK/RECORDING ON VHS DECK (cont.) Recording Features (VHS deck) Record One Programme While W atching Another Once recording is in progress, all y ou need to do is to set the channel controls on the TV for the station you wish to view .
Masterpage:Right 27 Filename [D VS3EK_1a-EN.fm] P age 27 November 5, 2001 1:37 pm Elapsed Recording T ime Indication 1 Set the counter display . Press – –:– – until a counter reading appears on the front displa y panel. 2 Reset the counter . Press 0000 before starting recording or pla yback.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 28 P age 28 November 5, 2001 1:37 pm PLA YBA CK/RECORDING ON VHS DECK (cont.) Retake Y ou can cut out unnecessary parts of a TV programme w h ile you are recording it. 1 Engage the Record-Pause mode. Press 9 during recording.
Masterpage:Right-NoT itle0 29 Filename [D VS3EK_1a-EN.fm] P age 29 November 5, 2001 1:37 pm B.E.S.T . Picture System (VHS deck) T he B .E.S.T . (Biconditional Equalised Signal T racking) system c heck.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 30 P age 30 November 5, 2001 1:37 pm PLA YB A CK/RECOR DING ON D V DECK Basic Playback (DV deck) A Load a cassette. Make sure the windo w side is up, the rear label side is facing you and the arrow on the front of the cassette i s pointed tow ard the recorder .
Masterpage:Right-NoT itle0 31 Filename [D VS3EK_1a-EN.fm] P age 31 November 5, 2001 1:37 pm Basic Recording (DV deck) A Load a cassette. Insert a Mini D V cassette with the erase protection s witch set to “REC”. ● T he recorder’ s power comes on automatically .
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 32 P age 32 November 5, 2001 1:37 pm PLA YB A CK/R ECORDING ON D V DECK (cont.) Playback Features (DV deck) NOTE: Refer to the illustrations below as y ou r ead the following procedures. Still Picture/Frame-By-Frame Playback 1 Pause during playback.
Masterpage:Right-NoT itle0 33 Filename [New-D VS3EK_1a-EN.fm] P age 33 November 5, 2001 6:04 pm High-Speed (T urbo) Search F or forw ard high-speed sear ch During playbac k , turn the JOG dial quickly to the right.
Filename [D VS3EK_1a-EN.fm] Masterpage:Left 34 P age 34 November 5, 2001 1:37 pm PLA YB A CK/R ECORDING ON D V DECK (cont.) Recording Features (DV deck) Record One Programme While W atching Another Once recording is in progress, all y ou need to do is to set the channel controls on the TV for the station you wish to view .
Masterpage:Right-NoT itle0 35 Filename [D VS3EK_1a-EN.fm] P age 35 November 5, 2001 1:37 pm Ti m e C o d e During recording, a time code is recorded on th e tape. T his time code is used to confirm the position on the tape when pla ying back or editing a tape.
Filename [D VS3EK_2-EN.fm] Masterpage:Left 36 P age 36 October 13, 2001 3:26 pm TIMER RECORDING VIDEO Plus+ ® Ti m e r Programming With the VIDEO Plus+ system, timer programming is greatly simplified because each TV progra mme has a corresponding code number whic h your recorder is able to recognize.
Masterpage:Right-NoT itle0 37 Filename [D VS3EK_2-EN.fm] P age 37 October 13, 2001 3:26 pm G Check the programme data. T he front displa y panel shows the progr amme start time. Pressing " changes the display to the progr amme stop time, then the date and channel position.
Filename [D VS3EK_2-EN.fm] Masterpage:Left 38 P age 38 October 13, 2001 3:26 pm TIMER RECORDING (cont.) Express T imer Programming If you do not know the PlusCode number for the progr a mme you wish to record, use the following procedure to set y our recorder to timer -record the programme.
Masterpage:Right-NoT itle0 39 Filename [D VS3EK_2-EN.fm] P age 39 October 13, 2001 3:26 pm H Enter the programme date. Press DAT E + / – . ● T he current date appears on the TV screen. T he date you enter appears in its place. I Enter the channel position.
Filename [D VS3EK_2-EN.fm] Masterpage:Left 40 P age 40 October 13, 2001 3:26 pm TIMER RECORDING (cont.) 24 Hour Express T imer Programming Y ou can programme a timer recording that starts within 24 hours using the JOG dial on the recorder . A Enter the programme mode.
Masterpage:Right-NoT itle0 41 Filename [D VS3EK_2-EN.fm] P age 41 October 13, 2001 3:26 pm NOTES: ● Y ou can programme each dec k to timer -record as many as 6 programmes. If you try to progr amme the recor der to record a seventh, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front displa y panel.
Filename [D VS3EK_2-EN.fm] Masterpage:Left 42 P age 42 October 13, 2001 3:26 pm TIMER RECORDING (cont.) Check, cancel and change programmes A Disengage the timer mode. Press # ( TIMER ), then press 1 . B Access the Programme Check screen/display . C Access the Programme screen/display .
Masterpage:Right-NoT itle0 43 Filename [D VS3EK_2-EN.fm] P age 43 October 13, 2001 3:26 pm When programmes overlap each other If “PROGRAM O VERLAPPED” appears, you ha ve another programme ov erlapping the p rogramme y ou ha ve just made. T he Programme Check screen appears and conflicting programmes will start blinking.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 44 P age 44 November 5, 2001 1:37 pm EDITING T ape Dubbing (from DV to VHS) Dubbing An Entire Cassette Because this recorder includes both VHS dec k and D V deck, you can easily use it for dubbing without connecting any other equipment.
Masterpage:Right-NoT itle0 45 Filename [D VS3EK_3-EN.fm] P age 45 November 5, 2001 1:37 pm T ape Dubbing (from VHS to DV) Dubbing An Entire Cassette Because this recorder includes both VHS dec k and D V deck, you can easily use it for dubbing without connecting any other equipment.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 46 P age 46 November 5, 2001 1:37 pm EDITING (cont.) Normal Dubbing (from DV to VHS) NOTES: ● If you set the dubbing direction incorrectly , you could er ase an important recording that you wanted to cop y .
Masterpage:Right-NoT itle0 47 Filename [D VS3EK_3-EN.fm] P age 47 November 5, 2001 1:37 pm Normal Dubbing (from VHS to DV) NOTES: ● If you set the dubbing direction incorrectly , you could er ase an important recording that you wanted to cop y . It is recommended to conduct a test with unimportant cassettes first.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 48 P age 48 November 5, 2001 1:37 pm EDITING (cont.) Edit From A Camcorder Y ou can use a camcorder as the source pla yer and y our recorder as the recording deck. Y ou can perform digital dubbing if you connect a device such as a camcorder w hich has a D V IN/OUT connector .
Masterpage:Right-Full-NoT itle0 49 Filename [D VS3EK_3-EN.fm] P age 49 November 5, 2001 1:37 pm 1 32 1 32 1 32 B If the camcorder has an S-VIDEO output connector .
Filename [D VS3EK_3-EN.fm] Masterpage:Left 50 P age 50 November 5, 2001 1:37 pm EDITING (cont.) Edit T o Or From Another Video Recorder Y ou can use your recorder as the source pla yer or a s the recording deck.
Masterpage:Right-Full-NoT itle0 51 Filename [D VS3EK_3-EN.fm] P age 51 November 5, 2001 1:37 pm NOTES: ● All necessary cables can be obtained from your dealer . ● F or Y/C signal input/output, be sure to use a 21- pin SC ART cable that is compatible with the Y/C signal.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 52 P age 52 November 5, 2001 1:37 pm EDITING (cont.) Output/Input Set L-1 OUTPUT and L-1 INPUT Setting T he A V1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C si gnal (a signal in whic h t he luminance and chrominance signals are separated).
Masterpage:Right-NoT itle0 53 Filename [D VS3EK_3-EN.fm] P age 53 November 5, 2001 1:37 pm L-2 SELECT Setting Set “L-2 SELECT” to the appropriate mode depending on the type of appliance connected to the recorder’ s A V2 (L-2) IN/ DECODER connector .
Filename [D VS3EK_3-EN.fm] Masterpage:Left 54 P age 54 November 5, 2001 1:37 pm EDITING (cont.) Audio Dubbing VHS Audio Dubbing Audio Dubbing replaces the normal audio sound of a previously recorded tape with a new soundtr ac k.
Masterpage:Right-NoT itle0 55 Filename [D VS3EK_3-EN.fm] P age 55 November 5, 2001 1:37 pm A Make connections. Connect an audio component to the A UDIO L + R input connectors on the recorder’ s front panel. ● When connecting a monaural audio component, use only the recorder’ s A UDIO L input conn ector .
Filename [D VS3EK_3-EN.fm] Masterpage:Left 56 P age 56 November 5, 2001 1:37 pm EDITING (cont.) Insert Editing VHS Insert Editing Insert Editing replaces part of the recorded scene with new material. Both the picture and Hi-F i audio soundtrac k are replaced with new ones, w h ile the normal audio soundtrac k remains unchanged.
Masterpage:Right-NoT itle0 57 Filename [D VS3EK_3-EN.fm] P age 57 November 5, 2001 1:37 pm A Make connections. Connect the play er’ s VIDEO OUT or S-VIDEO OUT and A UDIO OUT connectors to your recorder’ s VIDEO or S-VIDEO and AUDIO input connectors on the front panel.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 58 P age 58 November 5, 2001 1:37 pm EDITING (cont.) Random Assemble Editing 64-programme Editing Memor y (8 programmes x 8 scenes) By using the Random Assemble Editing function, you can select up to 8 scenes from a previously recorded Mini D V cassette and automatically dub them onto a VHS cassette.
Masterpage:Right-NoT itle0 59 Filename [D VS3EK_3-EN.fm] P age 59 November 5, 2001 1:37 pm F Locate the end point. G Prepare the source tape. Rewind the tape in the D V dec k to the beginning of the scene you w ant to edit. H Prepare the VHS deck for dubbing.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 60 P age 60 November 5, 2001 1:37 pm REMO TE CONTROL Remote Control Functions Remote A/B/C/D Code Switching T he remote control is capable of controlling fo ur JVC video recorders independently . Each of recorders can respond to one of four codes (A, B, C or D).
Masterpage:Right-NoT itle0 61 Filename [D VS3EK_3-EN.fm] P age 61 November 5, 2001 1:37 pm TV Multi-Brand Remote Control Y our remote control can operate the basic functions of your TV set. In addition to JVC TVs, other manufacturer’ s TVs can also be controlled.
Filename [D VS3EK_3-EN.fm] Masterpage:Left 62 P age 62 November 5, 2001 1:37 pm REMO TE CONTROL (cont.) Satellite Receiver Multi-Brand Remote Control Y our remote control can operate the basic functions of your satellite receive r set. In addition to JVC satellite receivers, other manufacturer’ s satellite receivers can also be controlled.
Masterpage:Right 63 Filename [D VS3EK_3-EN.fm] P age 63 November 5, 2001 1:37 pm SYSTEM CONNECTIONS Connecting T o A Printer Y ou can make printouts of video images by connecting the GV -DT1/GV -DT3 Digital Printer (sold separ ately) to the D V IN/OUT connector .
Filename [D VS3EK_3-EN.fm] Masterpage:Left 64 P age 64 November 5, 2001 1:37 pm SYSTEM CONNECTIONS (cont.) Connecting T o A Satellite Receiver Connect the satellite recei ver to the A V2 (L-2) IN/ DECODER connector , then connect the A V1 (L-1) IN/ OUT connector to the TV’ s conn ector .
Masterpage:Right-NoT itle0 65 Filename [D VS3EK_3-EN.fm] P age 65 November 5, 2001 1:37 pm Connecting/Using A Stereo System T hese instructions enable you to connect y o ur video recorder to your Hi-F i stereo system (if you ha ve one) and listen to the soundtrac k through the stereo.
Filename [D VS3EK_4-EN.fm] Masterpage:Left 66 P age 66 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS Mode Set Y ou can change v arious mode settings on TV screen by following the procedure described belo w . F or each mode setting, see pages 67 to 71. ● T he procedure shows how to set “O .
Masterpage:Right-Full-NoT itle0 67 Filename [D VS3EK_4-EN.fm] P age 67 November 5, 2001 1:42 pm MODE SET * T he default setting is bold in the table below . 8 O.S.D. ON OFF When this function is set to “ON”, various operational indicators appear on the TV screen.
Masterpage:Left-FullCol 68 Filename [D VS3EK_4-EN.fm] P age 68 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) VHS MODE SET * T he default setting is bold in the table below . 8 B.E.S.T . ON OFF Y ou can set the B .E.S.T . (Biconditional Equalised Signal T racking) system to “ON” or “OFF” ( 墌 pg.
Masterpage:Right-Full-NoT itle0 69 Filename [D VS3EK_4-EN.fm] P age 69 November 5, 2001 1:42 pm VHS MODE SET (cont.) * T he default setting is bold in the table below . 8 DIGIT AL 3R ON OFF When this function is set to “ ON”, the Digital 3R picture system a pplies edge correction to the luminance signal to enhance detail.
Masterpage:Left-FullCol 70 Filename [D VS3EK_4-EN.fm] P age 70 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) VHS MODE SET (cont.) * T he default setting is bold in the table below .
Masterpage:Right-Full-NoT itle0 71 Filename [D VS3EK_4-EN.fm] P age 71 November 5, 2001 1:42 pm DV MODE SET * T he default setting is bold in the table below . 8 SOUND MODE 12BIT 16BIT Select the appropriate mode before recording on a Mini D V tape. 12BIT : Enables Audio Dubbing later .
Filename [D VS3EK_4-EN.fm] Masterpage:Left 72 P age 72 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) T uner Set Y our recorder needs to memorize all necessary stations in channel positions in order to record TV programmes.
Masterpage:Right-NoT itle0 73 Filename [D VS3EK_4-EN.fm] P age 73 November 5, 2001 1:42 pm D View the Confirmation screen. After “SC AN COMPLETED” is display ed on th e TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears.
Filename [D VS3EK_4-EN.fm] Masterpage:Left 74 P age 74 November 5, 2001 3:04 pm SUBSIDIARY SETTINGS (cont.) Manual Channel Set Store channels that were not stored during Auto Set Up ( 墌 pg. 13), Preset Download ( 墌 pg. 14) or Auto Channel Set ( 墌 pg.
Masterpage:Right-NoT itle0 75 Filename [D VS3EK_4-EN.fm] P age 75 November 5, 2001 1:42 pm Delete A Channel A Select the item. Press rt w e until the item you wa nt to delete begins blinking. B Delete a channel. Press & . ● T he item directly beneath the cancelled one moves up one line.
Filename [D VS3EK_4-EN.fm] Masterpage:Left 76 P age 76 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) Set Stations (A) Set station name s that are regist ered in your recorder . A Select the item. Press rt w e until the item y ou want begins blinking.
Masterpage:Right-NoT itle0 77 Filename [D VS3EK_4-EN.fm] P age 77 November 5, 2001 1:42 pm Fine-T uning Channels Already Stored A Select the channel to fine-tune. Press rt w e until the c hannel you want to tune begins blinking. B Access the Manual Channel Set screen.
Filename [D VS3EK_4-EN.fm] Masterpage:Left 78 P age 78 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) TV Station And ID List * T he “ID” abbreviation is what i s shown on-screen in lieu of the st ation name.
Masterpage:Right-NoT itle0 79 Filename [D VS3EK_4-EN.fm] P age 79 November 5, 2001 1:42 pm TV Station Channel Number Guide Only the main stations are listed. T here are in addition many relay stations, and full lists are a v ailable from the BBC and ITV .
Filename [D VS3EK_4-EN.fm] Masterpage:Left 80 P age 80 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) Clock Set A T urn on the recorder . Press 1 . B Access the Main Menu screen. Press MENU . C Access the Initial Set screen. Press rt to move the highlight bar (pointer) to “INITIAL SET”, then press OK or e .
Masterpage:Right-NoT itle0 81 Filename [D VS3EK_4-EN.fm] P age 81 November 5, 2001 1:42 pm E Set the date and time. Press rt to set the time, then press OK or e . T he “D A TE” display begins blinking. Repeat the same procedure to set the date and y ear .
Filename [D VS3EK_4-EN.fm] Masterpage:Left 82 P age 82 November 5, 2001 1:42 pm SUBSIDIARY SETTINGS (cont.) VIDEO Plus+ ® System Setup Guide Program Number Set A Access the Main Menu screen. Press MENU . B Access the Initial Set screen. Press rt to mov e the highlight bar (point er) to “INITIAL SET”, then press OK or e .
Masterpage:Right-FullCol 83 Filename [D VS3EK_4-EN.fm] P age 83 November 5, 2001 1:42 pm TROUBLESHOO TING Before requesting service for a problem, use this ch art and see if you can repair the troubl e yourself. Small problems are often easily corrected, and this can sa ve you the trouble of sending y o ur video recorder off for repair .
Masterpage:Left-FullCol 84 Filename [D VS3EK_4-EN.fm] P age 84 November 5, 2001 3:04 pm TROUBLESHOO TING (cont.) RECORDING SYMP TOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Recording cannot be started. ● For the VHS deck T here is no cassette loaded, or the cassette loaded has had its record safety tab removed.
Masterpage:Right-Full-NoT itle0 85 Filename [D VS3EK_4-EN.fm] P age 85 November 5, 2001 1:42 pm TIMER RECORDING SYMP TOM POSSIBLE CAUSE CORRECTIVE ACTION 1. T imer recording won’t w o rk. ● T he clock and/or the timer ha ve been set incorrectly . Re-perform the clock and/or timer settings.
Masterpage:Left-FullColx2 86 Filename [D VS3EK_4-EN.fm] P age 86 November 5, 2001 1:42 pm TROUBLESHOO TING (cont.) OTHER PROBLEMS SYMP TOM POSSIBLE CAUSE CORRECTIVE ACTION 1. Whistling or ho wling is heard from the TV during camcor der recording. ● T he camcorder’ s microphone is too close to the TV .
Masterpage:Right 87 Filename [D VS3EK_4-EN.fm] P age 87 November 5, 2001 3:29 pm QU ESTIONS AND ANSWERS PLA YBACK Q. What happens if the en d of the tap e is reached during pla yback or sear ch? A. T he tape is automatically rewound to the beginning. Q.
Filename [New-D VS3EK_4-EN.fm] Masterpage:Left 88 P age 88 November 5, 2001 6:06 pm SPECIFIC A TIONS GENERAL P ower requirement : AC 220 V – 240 V d , 50 Hz/60 Hz P ower c onsumptio n Po w e r o n : 31 W Po w e r o f f : 6.
Masterpage:Right 89 Filename [D VS3EK_1-ENIX.fm] P age 89 October 16, 2001 5:46 pm LISTE OF TERMS A Audio Dubbing ........... ................ ................ ........... 54 AUDIO REC .................. ............. ................ ........... 71 Auto Channel Set .
Filename [D VS3EK_1-ENIX.fm] Masterpage:Left 90 P age 90 October 16, 2001 5:46 pm MEMO DVS3EK_1-EN.book Page 90 Monday , November 5, 2001 1:43 PM.
Masterpage:Right 91 Filename [D VS3EK_1-ENIX.fm] P age 91 October 16, 2001 5:46 pm DVS3EK_1-EN.book Page 91 Monday , November 5, 2001 1:43 PM.
T V Ð 1 4 7 1 2 1 2 TV CABLE/SA 0000 STAR DEBU VPS/PDC LCD PRO PROG Filename [D VS3EK_Cov4-EN.fm] EN P age 92 November 5, 2001 1:35 pm Printed in Ger many 1101MNV * ID * JVE DVS3EK_1-EN.
An important point after buying a device JVC LPT0617-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LPT0617-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LPT0617-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LPT0617-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LPT0617-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LPT0617-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LPT0617-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LPT0617-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LPT0617-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
