Instruction/ maintenance manual of the product LPT0593-001B JVC
Go to page of 16
P age 1 October 23, 2001 10:00 am Safety Precautions T he rating plate and the safet y caution are on the rear of the unit. W ARNING: D ANGEROUS V OL T A GE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
P age 2 October 23, 2001 10:00 am 7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus. 8. A V OID violent shocks to the recorder during transport.
P age 3 October 23, 2001 1 0:00 am Remote control * Not function with this recorder . On-screen display If you press OK on the remote control when “O .S.D .” is set to “ON”, you can see the current recorder status on the TV screen. After about 5 seconds, indications other than the time counter disappear .
P age 4 October 23, 2001 10:00 am Initial Settings Video Channel Set V ideo channel (RF output channel) is the channel on which y our TV receives picture and sound signals f rom the video reco rder through the RF cable.
P age 5 October 23, 2001 10:00 am Language Setting A Access Main Menu screen, then Initial S et screen Press MENU on the remote control. Press rt to place the pointer next to “INITIAL SET”, then press OK or e . B Access Language Select screen Press rt to place the pointer next to “LANG U AGE”, then press OK or e .
P age 6 October 23, 2001 10:00 am Playback Features Adjusting tracking condition — tracking adjustment Automatic trac king adjustment Whenever y ou insert a tape and st art playbac k, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playbac k.
P age 7 October 23, 2001 1 0:00 am Recor ding Accidental er asure prev ention T o prevent accidental recording on a recorded cassette, remo ve its record safety tab. T o reco rd on it late r, cover the hole with adhesive tape. Basic Recording A Load a cassette Make sure the record safety ta b is intact.
P age 8 October 23, 2001 10:00 am Timer Reco rding Up to 8 timer recording pr ograms can be made using G- CODE timer programing or Ex press timer programing method as far as a year in ad vance. Remember , the clock must be set before you can program the timer .
P age 9 October 23, 2001 10:00 am Express T imer Programing ● Remember , the clock must be se t before y ou can program the timer . ● Load a cassette with the record safety tab intac t. T he recorder turns on, and the counter is reset, automatically .
Other Functions Checking tape position When you c hange the recorder operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Searc h or Instant Revie w, the tape position indicator appears.
䡵 AUTO SP ] LP TIMER —O N/ OFF When this function is set to “ON”, the recorder automatically switches to LP mode to allo w complete r ecording if there is not enough tape to record the entire program w hile timer -recordin g in SP mode. F or Example, Recording a P AL-broadcast programme of 2 10 minutes in length onto a 180-minute tape.
P age 12 October 23, 2001 10:00 am Changing Remote Control Code T his remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals.
P age 13 October 23, 2001 10:00 am Inf ormation on Multi-System Compatibility Off-Air Recording T he built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts. Playback T his recorder can play ba ck all 3 types of recorded tape.
P age 14 October 23, 2001 10:00 am T ape-T o-T ape Editing T here are 4 different types of recorded tape, depending on the signal recorded. T uner Setting IMPORT ANT P erform the following steps only .
P age 15 October 23, 2001 1 0:00 am E Set desired station T he screen to the right appears w hen a station is detected. If you do n ot want to store the detected station... Press rt to place the pointer next to “CONTINUE”, then press OK or e . Channel searc h will resume.
P age 16 October 23, 2001 10:00 am Specifications Specifications shown are for SP mode unless specified oth erwise. E. & O.E. Design and specifications subject to c hange without notice.
An important point after buying a device JVC LPT0593-001B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LPT0593-001B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LPT0593-001B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LPT0593-001B you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LPT0593-001B will certainly help you make a decision on the purchase.
If you already are a holder of JVC LPT0593-001B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LPT0593-001B.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LPT0593-001B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LPT0593-001B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
