Instruction/ maintenance manual of the product LPT0593-001A JVC
Go to page of 16
Safety Precautions T he rating plate and the safety caution are on the rear of the unit. W ARNING : D ANGEROUS VO L T A GE INSIDE W ARNING: T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ● Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder .
7. DO NO T place any naked flame sources, s uch as lighted candles, on the a ppar atus. 8. A V OID violent shoc ks to the recorder during transport. MOISTURE CONDENSA TION Moisture in the air will con.
Remote control * Not function with this recorder . On-screen display If you press OK on the remote control w hen “O.S.D .” is set to “ON”, you can see the current recorder status on the TV screen. After about 5 seconds, indications other than the time counter disappear .
Initial Settings Video Channel Set V ideo channel (RF output channel) is the channel on w hich your TV receiv es picture and sound signals from the video recorder through the RF cabl e. Before performin g the follow ing steps, make sure th e recorder’ s power is off and there is no casset te inserted in the recorder .
Language Setting A Access Main Menu screen, then Initial Set screen Press MENU on the remote control. Press rt to place the pointer next to “INITIAL SET”, then press OK or e . B Access Language Select screen Press rt to place the pointer next to “LANGUAGE”, then press OK or e .
Playback Features Adjusting tracking condition — tracking adjustment Automatic t rac king adjustment Whenever y ou insert a tape and start playbac k, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playbac k.
Recor ding Accidental er asure prev ention T o prevent accidental recording on a recorded cassette, remov e its record safety tab. T o record o n it late r, co ver the hole with adhesiv e tape. Basic Recording A Load a cassette Make sure the record safety tab is intact.
Timer Reco rding Up to 8 timer recording progr ams can be made using G- CODE timer programing or Express timer programing method as far as a year in ad v ance. Remember , the clock must be set before you can program the timer . NOTES: ● If all the 8 programs ha ve alread y been set, “PROGRAM FULL” appears on the TV screen.
Express T imer Programing ● Remember , the clock must be set before you can program the timer . ● Load a cassette with the rec ord safety tab intact. T he recorder turns on, and the counter is reset, automatically . ● Select the appropriate colour system with “P AL/MESEC AM” and “NTSC” in Function settings.
Other Functions Checking tape position When you c hange the recorder operation mode from the stop mode to fast forward or rewind mode, or when you perform an Index Searc h or Instant Revie w, the tape position indicator appears.
䡵 AUTO SP ] LP TIMER —O N / OFF When this function is set to “ON”, the recorder automatically switches to LP mode to allo w complete recording if there is not enough tape to record the entire program w hile timer -recording in SP mode. F or Example, Recording a P AL-broadcast programme of 2 10 minutes in length onto a 180-minute tape.
Changing Remote Control Code T his remote control is capable of transmitting two control codes; one set to respond to A code control signals and another set to respond to B code control signals. T his remote control is preset to send A code signals because y our recorder is initially set to respond to A code signals.
Inf ormation on Multi-System Compatibility Off-Air Recording T he built-in multi-system tuner is capable of receiving P AL B/G, I a nd D/K, and SEC AM B/G and D/K broadcasts.
Ta p e - To - Ta p e E d i t i n g T here are 4 different types of recorded tape, depending on th e signal recorded. T u ner Setting IMPORT ANT P erform the following steps only if auto channel set has not been set correctly by A uto Set Up function or if you have m oved to a different area or if a new station starts bro adcasting in your area.
E Set desired station T h e s c r e e nt ot h er i g h ta p p e a r sw h e na station is detected. If you do not w ant to store the de tected station... Press rt to place the pointer next to “CONTINUE”, then press OK or e . Channel sear ch will resume.
Specifications Specifications shown are for SP mode unless specified otherwise. E. & O .E. Design and specifications subject to change without notice.
An important point after buying a device JVC LPT0593-001A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LPT0593-001A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LPT0593-001A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LPT0593-001A you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LPT0593-001A will certainly help you make a decision on the purchase.
If you already are a holder of JVC LPT0593-001A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LPT0593-001A.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LPT0593-001A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LPT0593-001A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
