Instruction/ maintenance manual of the product LD-HD2KU JVC
Go to page of 20
INSTRUCTIONS LD-HD2KU/LD-HD2KE ® DIGITAL VIDEO PROCESSOR LD-HD2KU For customer Use: Serial No. Model No. Enter below the Serial No. which is located on the side panel of the cabinet.
2 SAFETY PRECAUTIONS IMPOR T ANT SAFEGU ARDS IMPROPER USE OF THIS EQUIPMENT CAN RESUL T IN PO TENTIAL ELECTRICAL SHOCK OR FIRE HAZ- ARD . In order not to def eat the safeguards incorporated into this product, observe the f ollowing basic rules for its installation, use and ser vice.
3 – Do not ov erload wall outlets, e xtension cords, or con ve- nience receptacles on other equipment as this can result in a risk of fire or electric shock. –N ev er push objects of any kind into this product through openings as they ma y touch dangerous voltage points or shor t out par ts that could result in a fire or electric shock.
4 SAFETY PRECA UTIONS ............................................................................................................. .................................. 2 Q UICK ST AR T ...................................................................
5 QUICK START Connection with Other Devices Before connecting to other devices, ensure to turn off the power supply of the device to be connected with the digital video processor. 䡵 Connecting to a Projector ● Read through the projector’s instruction manual thoroughly.
6 INSTALLATION INSTALLATION Accessories The following accessories are packed together with this unit. Please confirm all items. If any item is missing, please contact your dealer. Placement The processor can be either placed on a table or rack mounted.
7 Satellite Receiver S-Video YPrPb HDTV DVI Alt. Conn. S-Video Input HD/PC Input YPrPb Input DVI Input RGBVH DVI Display Set Input to Transcode This unit Note 7 DVI Output: Digital output interface for compatible dis- plays.
8 SETUP FRONT PANEL CONTROL 1 Firmware Reset: Push a small paper clip into this opening to reset the unit’s CPU. ● Use this reset only if the unit will not respond to commands. It will not erase custom settings. Use the Factory Restore command in the Setup Menu to completely reset firmware.
9 SET : BLACK LEVEL (For setting the black level) 7.5 IRE / 0 IRE (Default) For setting the black signal level of the video signal. When the video signal is “7.
10 IR REMOTE/OSD ON SCREEN DISPLAY (OSD) Accessing the OSD 1. Press Menu button to bring up main Index. 2. Use Function Up/Down Keys until the triangle at the top of the OSD turns yellow. 3. Use the Left/Right keys to move to the next menu page. A list of available Functions will appear.
11 Note ● When using a 4:3 source on a Wide Angle screen there are black bars on the left and right of the image. The sidebars can be changed to gray using the Blanking Level control located in the Display menu. If filling the entire screen is desired, select Letterbox.
12 䡵 Display Menu Use these commands to adjust the image position and edge blanking. It is recommended to adjust sizing, position and blanking in the display device first with this unit in the Factory preset setting. Then use this unit’s controls only if the display runs out of range or does not offer these controls.
13 RS232 䡵 Patterns Menu The best approach to system setup is to use a DVD that offers the proper test patterns. This way, the system is aligned for the entire signal path. If a test DVD is not avail- able, then use the internal test patterns provided in this unit.
14 RS232 (continued) Following the header, a comma is used to delimit the header from the command. All the commands with their descriptions are listed below. All the text strings are terminated with a carriage return (0x0d or 13). Maximum command string length is 250 characters.
15 COMMAND BB# BL# BLT# CS# DVD DVE E# EXTD EXTE HP# LB# M# OSDOFF OSDON OUTMOD PYD PYE RB# RD RE SETFT STPP# STNP# SRHELP TB# VD VE VPOL# W# XD XE YD YE DESCRIPTION Bottom Blanking Border Level – b.
16 33.8 KHz 31.3 KHz 37.6 KHz 45.0 KHz 37.5 KHz 60.5 KHz 48.3 KHz 48.3 KHz 62.9 KHz 63.9 KHz 63.5 KHz 64.0 KHz 56.3 KHz 67.4 KHz TP1 100% COLOR BARS TP3 10 STEP GREY TP5 CB RAMP TP7 BLACK SCREEN TP9 R.
17 SPECIFICATIONS ● Design and specifications are subject to change without prior notice. ● Please note that some of the pictures and illustrations may have been abridged, enlarged or contextualized in order to aid comprehension. Images may differ from the actual product.
18 ......................................................................................................................... ......................................................................................................................... ....
.
LD-HD2KU/LD-HD2KE ® VICTOR COMPANY OF JAPAN, LIMITED Printed in Japan 0504-SW-VP © 2004 VICTOR COMPANY OF JAPAN, LIMITED DIGITAL VIDEO PROCESSOR.
An important point after buying a device JVC LD-HD2KU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought JVC LD-HD2KU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data JVC LD-HD2KU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, JVC LD-HD2KU you will learn all the available features of the product, as well as information on its operation. The information that you get JVC LD-HD2KU will certainly help you make a decision on the purchase.
If you already are a holder of JVC LD-HD2KU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime JVC LD-HD2KU.
However, one of the most important roles played by the user manual is to help in solving problems with JVC LD-HD2KU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device JVC LD-HD2KU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
